journal article·2018-11-01

Intense pulsed light sintering of thick conductive wires on elastomeric dark substrate for hybrid 3D printing applications

Quanyi Mu, Ming Lei, Devin J Roach, Conner K Dunn, Xiao Kuang, Chao Yuan, Tiejun Wang, H Jerry Qi

Smart Materials and Structures· Volume 27· Issue 11
Publisher page

Abstract

Abstract Recent developments in 3D/4D printing for functional materials and devices require embedding conductive wires within a 3D printed part. One common approach is to direct-ink-write conductive silver nanoparticle (NP) ink on a 3D printed structure and subsequently sinter the ink. Intense pulsed light (IPL) sintering is a promising choice due to its advantage of rapid sintering. Despite the extensive studies of IPL sintering metal NPs on plastic foil, its use for hybrid 3D/4D printing has not been fully explored. In this paper, we studied the multi-cycle sintering method that alternates between light exposure cycle and cooling cycle to IPL sintering silver NP ink on a widely used commercial 3D printed elastomeric dark material. We investigated how the light energy can affect the sintered conductive wire quality by varying light exposure cycle, cooling cycle and the distance from light source to the sample, with fixed multiple small pulses. Numerical analysis, in situ temperature measurements, in situ resistance measurements, and microstructure characterization results confirmed the effectiveness of the multi-cycle IPL sintering method in obtaining thick conductive wires on the light absorbing substrate. Peeling tests and electromechanical experiments were performed to evaluate the interfacial and electromechanical properties of the sintered wire. We reported the phenomenon of wrinkles on the substrate and analyzed the mechanism by using finite element method. The proposed method can be applied to other 3D printed materials with different conductive wire dimension and thus have the potential to be integrated with the printed stretchable device for hybrid 3D printing and 4D printing in the future.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Multiprocess 3D printing for increasing component functionality10.1126/science.aaf2093 ↗
2. Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing10.1038/nmat4782 ↗
3. Digital light processing 3D printing of conductive complex structures10.1016/j.addma.2017.08.011 ↗
4. 3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers10.1039/C7SM00759K ↗
5. Gigahertz electromagnetic structures via direct ink writing for radio-frequency oscillator and transmitter applications10.1002/adma.201605198 ↗
6. 3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray10.1016/j.bios.2015.09.017 ↗
7. 4D printing: multi‐material shape change10.1002/ad.1710 ↗
8. Active materials by four-dimension printing10.1063/1.4819837 ↗
9. Active origami by 4D printing10.1088/0964-1726/23/9/094007 ↗
10. 4D printing of a self-morphing polymer driven by a swellable guest medium10.1039/C7SM01796K ↗
11. Thermal cure effects on electromechanical properties of conductive wires by direct ink write for 4D printing and soft machines10.1088/1361-665X/aa5cca ↗
12. Temperature effect on physical properties and surface morphology of printed silver ink during continuous laser scanning sintering10.1016/j.ijheatmasstransfer.2016.11.095 ↗
13. Effect of laser-induced temperature field on the characteristics of laser-sintered silver nanoparticle ink10.1088/0957-4484/24/26/265702 ↗
14. Argon plasma sintering of inkjet printed silver tracks on polymer substrates10.1039/b823329b ↗
15. Roll-to-roll compatible sintering of inkjet printed features by photonic and microwave exposure: from non-conductive ink to 40% bulk silver conductivity in less than 15 s10.1002/adma.201104417 ↗
16. Hybrid copper-silver conductive tracks for enhanced oxidation resistance under flash light sintering10.1021/acsami.6b07826 ↗
17. Eco-friendly and rapid fabrication method for producing polyethylene terephthalate (PET) mask using intensive pulsed light10.1007/s40684-017-0019-9 ↗
18. Hybrid copper-silver-graphene nanoplatelet conductive inks on PDMS for oxidation resistance under intensive pulsed light10.1021/acsami.7b10748 ↗
19. Intense pulsed light for split-second structural development of nanomaterials10.1039/C7TC01848G ↗
20. Mechanisms of photonic curing: processing high temperature films on low temperature substrates
21. Broadcast photonic curing of metallic nanoparticle films
22. Extremely flexible, printable Ag conductive features on PET and paper substrates via continuous millisecond photonic sintering in a large area10.1039/C4TC01422G ↗
23. Two-step flash light sintering process for crack-free inkjet-printed Ag films10.1088/0960-1317/23/1/015013 ↗
24. Printed highly conductive Cu films with strong adhesion enabled by low-energy photonic sintering on low-Tg flexible plastic substrate10.1088/1361-6528/28/3/035203 ↗
25. Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes10.1039/c2jm32977h ↗
26. Sintering of inkjet-printed silver nanoparticles at room temperature using intense pulsed light10.1007/s11664-011-1711-0 ↗
27. Potential for multi-functional additive manufacturing using pulsed photonic sintering10.1016/j.promfg.2015.09.043 ↗
28. Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns10.1039/C6TC00628K ↗
29. Two-step flash light sintering process for enhanced adhesion between copper complex ion/silane ink and a flexible substrate10.1016/j.tsf.2016.02.033 ↗
30. Two-step flash light sintering of copper nanoparticle ink to remove substrate warping10.1016/j.apsusc.2016.05.025 ↗
31. Photonic curing for millisecond-drying of thin films
32. Strength and performance enhancement of bonded joints by spatial tailoring of adhesive compliance via 3D printing10.1021/acsami.6b13038 ↗
33. Direct 4D printing via active composite materials10.1126/sciadv.1602890 ↗
34. 3D printed microfluidic device with integrated biosensors for online analysis of subcutaneous human microdialysate10.1021/acs.analchem.5b01353 ↗
35. Photonic flash sintering of silver nanoparticle inks: a fast and convenient method for the preparation of highly conductive structures on foil10.1557/mrc.2012.28 ↗
36. Interfacial welding of dynamic covalent network polymers10.1016/j.jmps.2016.03.009 ↗
37. Nanoscale-shape-mediated coupling between temperature and densification in intense pulsed light sintering10.1088/0957-4484/27/49/495602 ↗
38. Controlling processing temperatures and self-limiting behaviour in intense pulsed sintering by tailoring nanomaterial shape distribution10.1039/C7RA11013H ↗
39. Rapid and versatile photonic annealing of graphene inks for flexible printed electronics10.1002/adma.201502866 ↗
40. Highly conductive ink jet printed films of nanosilver particles for printable electronics10.1149/1.2073670 ↗
41. Temperature, crystalline phase and influence of substrate properties in intense pulsed light sintering of copper sulfide nanoparticle thin films10.1038/s41598-018-20621-9 ↗
42. Simulating the thermal response of thin films during photonic curing10.1115/IMECE2012-87674 ↗
43. Temperature changes of copper nanoparticle ink during flash light sintering10.1016/j.jmatprotec.2014.06.007 ↗
44. On the self-damping nature of densification in photonic sintering of nanoparticles10.1038/srep14845 ↗
45. Copper-rubber interface delamination in stretchable electronics10.1016/j.scriptamat.2010.06.041 ↗
46. Influence of structural relaxation on thermomechanical and shape memory performances of amorphous polymers10.1016/j.polymer.2016.12.047 ↗
47. Crack formation and substrate effects on electrical resistivity of inkjet-printed Ag lines10.1016/j.matlet.2010.02.014 ↗
48. Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate10.1088/0960-1317/21/12/125023 ↗
49. A review of thermal processing in the subsecond range: semiconductors and beyond10.1088/0268-1242/31/10/103001 ↗
50. Enhancing adhesion of screen-printed silver nanopaste films10.1002/admi.201500283 ↗
51. Multi-scale modeling of delamination through fibrillation10.1016/j.jmps.2014.01.009 ↗
52. Delamination of thin film strips10.1016/S0040-6090(02)00973-2 ↗
53. A water-based silver-nanowire screen-print ink for the fabrication of stretchable conductors and wearable thin-film transistors10.1002/adma.201600772 ↗
54. Desolvation induced origami of photocurable polymers by digit light processing10.1002/marc.201600625 ↗