On mechanical properties of NiTi SMA wires prestrained by cold rolling
Source abstract
Abstract
Abstract This study investigates mechanical properties and recovery stress of NiTi shape memory alloy (SMA) wires prestrained by different degrees of cold rolling. Using differential scanning calorimetry (DSC), the phase transformation temperature in cold rolled wires are compared with as received one. Monotonic and hysteretic tensile tests are conducted to determine the stress-strain curves of each cold rolled wire. Thickness recovery ratio, recovery and residual stress of constrained wires are measured during temperature variations. It is found that cold rolling can reduce detwinning process in tensile behavior and finally eliminate it with more cold work. Moreover, the optimal degree of cold rolling is obtained in terms of maximum induced recovery stress, safety of storage and minimum morphological changes and costs. Based on the experimental data, the degree of cold rolling can be categorized into three ranges of slight, moderate and extensive.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Lagoudas · 200810.1007/978-0-387-47685-8 ↗
2. Arghavani · 2012
3. Use of a Ni60Ti shape memory alloy for active jet engine chevron application: I. Thermomechanical characterization10.1088/0964-1726/19/1/015020 ↗
4. Implementation and testing of passive control devices based on shape memory alloys10.1002/1096-9845(200007)29:7<945::AID-EQE958>3.0.CO;2-# ↗
5. Unseating prevention for multiple frame bridges using superelastic devices10.1088/0964-1726/14/3/008 ↗
6. Superelastic semi-active damping of a base-isolated structure10.1002/stc.276 ↗
7. Buckling of shape memory alloy columns (buckling of curved column and twinning deformation effect)10.1007/978-94-010-0724-5_35 ↗
8. Analytical solution for twinning deformation effect of pre-strained shape memory effect beam-columns10.1177/1045389X19862380 ↗
9. Review and perspectives: shape memory alloy composite systems10.1007/s00707-015-1433-0 ↗
10. A review of shape memory material’s applications in the offshore oil and gas industry10.1088/1361-665X/aa7706 ↗
11. Micromechanics of stress transfer in shape memory alloy reinforced three-phase composites10.1177/1045389X18783086 ↗
12. Recovery and residual stress of SMA wires and applications for concrete structures10.1088/0964-1726/19/9/094013 ↗
13. Recovery stress of shape memory alloy wires induced by hydration heat of concrete in reinforced concrete beams10.1177/1045389X13519005 ↗
14. Achieving ultrafine grained Fe-Mn-Si shape memory alloys with enhanced shape memory recovery stress10.1016/j.msea.2017.06.091 ↗
15. Design of shape memory alloy pipe couplers: modeling and experiments10.1117/12.915361 ↗
16. Shape-memory alloy rings as tight couplers between ultrahigh-cacuum pipes: design and experimental assessment10.1116/1.4978044 ↗
17. Innovation in producing crane rail fishplate using Fe-Mn-Si-Cr based shape memory alloy10.1179/174328408X302585 ↗
18. Medical shape memory alloy applicatins-the market and its products10.1016/j.msea.2003.10.326 ↗
19. Confining jackets for concrete cylinders using NiTiNb and NiTi shape memory alloy wires10.1088/0031-8949/2010/T139/014058 ↗
20. Monotonic and cyclic bond behavior of confined concrete using NiTiNb SMA wires10.1088/0964-1726/20/7/075016 ↗
21. Active confinement of reinforced concrete bridge columns using shape memory alloys10.1061/(ASCE)BE.1943-5592.0000038 ↗
22. Emergency repair of severely damaged reinforced concrete columns using active confinement with shape memory alloys10.1088/0964-1726/20/6/065018 ↗
23. Self-prestressing using iron-based shape memory alloy for flexural strengthening of reinforced concrete Beams10.14359/51689455 ↗
24. Prestressing effect of cold-drawn short NiTi SMA fibers in steel reinforced mortar beams10.1088/0964-1726/25/8/085041 ↗
25. Crack-closing of cement mortar beams using NiTi cold-drawn SMA short fibers10.1088/0964-1726/24/1/015018 ↗
26. Repairing cracks developed in mortar beams reinforced by cold-drawn NiTi or NiTiNb SMA fibers10.1088/0964-1726/24/12/125010 ↗
27. Feasibility of iron-based shape memory alloys strips for prestressed strengthening of concrete structures10.1016/j.conbuildmat.2014.01.069 ↗
28. Orvis · 200910.15368/theses.2009.76 ↗
29. The behavior of concrete cylinders confined by shape memory alloy wires10.1088/0964-1726/17/6/065032 ↗
30. Bond strength of concrete confined by SMA wire jackets10.1016/j.phpro.2010.11.100 ↗
31. New SMA short fibers for cement composites manufactured by cold drawing10.5539/jmsr.v5n2p68 ↗
32. Seismic protection of lap-spliced RC columns using SMA wire jackets10.1680/macr.10.00181 ↗
33. An analytical study on the bending of prismatic SMA beams10.1088/0964-1726/24/12/125035 ↗
34. The effects of cold work and heat treatment on the properties of nitinol wire10.1115/BioMed2007-38012 ↗
35. The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy10.1016/0956-7151(91)90177-3 ↗
36. The effects of cold rolling and the subsequent heat treatments on the shape memory and the superelasticity characteristics of Cu73Al16Mn11 shape memory alloy10.1088/1361-665X/aa9cc5 ↗
37. Effect of cold rolling on phase transformation temperatures of NiTi shape memory alloy10.1007/s11665-014-1344-6 ↗