Flow control and separation delay in morphing wing aircraft using traveling wave actuation
Source abstract
Abstract
Abstract This study examines the biomimicry of wave propagation, a mode of locomotion in aquatic life for the use-case of morphing aircraft surfaces for boundary layer control. Such motion is theorized to inject momentum into the flow on the upper surface of airfoils, and as a consequence, creates a forcible pressure gradient thereby increasing lift. It is proposed that this method can be used to control flow separation and reduce the likelihood of stall at high angles of attack. The motivation for such a mechanism is especially relevant for aircraft requiring abrupt maneuvers, and especially at high angles of attack as a safety measure against stalling. The actuation mechanism consists of lightweight piezoelectric ceramic transducers placed beneath the upper surface of an airfoil. An open-loop system controls surface morphing. A two-dimensional Fourier Transform technique is used to estimate traveling to standing wave ratio, which is verified analytically using Euler Bernoulli beam theory, and experimentally using a prototype wing. Propagating wave control is tuned and verified using a series of scanning laser vibrometry tests. A custom two-dimensional NACA 0018 airfoil tests the concept in a low-speed wind tunnel with an approximate Reynolds Number of 50 000. Both traveling waves and the changes in lift and drag will be experimentally characterized.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Biomimetic flight and propulsion mechanisms · Plasma and Flow Control in Aerodynamics · Fluid Dynamics and Turbulent Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Large eddy simulations of a turbulent channel flow with a deforming wall undergoing high steepness10.1063/1.5131268 ↗
2. A numerical study on controlling flow separation via surface morphing in the form of backward traveling waves10.2514/6.2019-3589 ↗
3. Reducing flow separation of an inclined plate via traveling waves10.1017/jfm.2019.705 ↗
4. Controlling flow separation on a thick airfoil using backward traveling waves10.2514/1.j059428 ↗
5. Analytical structural optimization and experimental verifications for traveling wave generation in self-assembling swimming smart boxes10.1088/0964-1726/24/9/094005 ↗
6. A review of morphing wing aircraft10.1177/1045389x11414084 ↗
7. The actuation characterization of cantilevered unimorph beams with single crystal piezoelectric materials10.1088/0964-1726/20/5/055024 ↗
8. Macro-fiber composite actuators for flow control of a variable camber airfoil10.1177/1045389x10392613 ↗
9. Experimental control of turbulent boundary layers with in-plane travelling waves10.1007/s10494-018-9926-2 ↗
10. Actuators for active flow control10.1146/annurev-fluid-122109-160634 ↗
11. Measurement and modelling of the reflection coefficient of an acoustic black hole termination10.1016/j.jsv.2015.03.043 ↗
12. Adaptive control of flexural waves propagating in a beam10.1006/jsvi.1993.1166 ↗
13. Excitation and sensing of multiple vibrating traveling waves in one-dimensional structures10.1016/j.jsv.2008.06.013 ↗
14. Gad-El-Hak · 200010.1017/CBO9780511529535 ↗
15. The control of flow separation by periodic excitation10.1016/s0376-0421(00)00008-7 ↗
16. Control of flow separation around an airfoil at low Reynolds numbers using periodic surface morphing10.1016/j.jfluidstructs.2017.11.008 ↗
17. Kinsler · 200010.1115/1.3269099 ↗
18. Review of hybrid laminar flow control systems10.1016/j.paerosci.2017.05.005 ↗
19. Review of research on low-profile vortex generators to control boundary-layer separation10.1016/s0376-0421(02)00010-6 ↗
20. An experimental and theoretical study of two-dimensional traveling waves in plates10.1177/1045389x16679284 ↗
21. Boundary layer separation control with directed synthetic jets10.2514/6.2000-519 ↗
22. Moving surface boundary-layer control10.1006/jfls.1997.0098 ↗
23. Design of a smart droop nose as leading edge high lift system for transportation10.2514/6.2009-2128 ↗
24. Motaharibidgoli · 201910.1007/978-3-319-75390-4_22 ↗
25. Control of thick airfoil, deep dynamic stall using steady blowing10.2514/1.j053090 ↗
26. Musgrave · 2019 · 28310.1007/978-3-319-74700-2_31 ↗
27. Turbulent boundary layer over a piezoelectrically excited traveling wave surface10.2514/6.2019-1354 ↗
28. The effect of amplitude of traveling wave actuations on flow control over an airfoil (abstract)10.1103/aps.dfd.2019.gfm.v0078 ↗
29. Parikh · 201110.4271/901978 ↗
30. Active control of bending wave propagation at acoustic frequencies10.1016/0022-460x(90)90658-m ↗
31. Passive control via slotted blading in a compressor cascade at stall condition10.36884/jafm.6.04.20670 ↗
32. Rao · 201910.1680/geot.2007.57.7.635 ↗
33. An object transport system using flexural ultrasonic progressive waves generated by two-mode excitation10.1109/58.852083 ↗
34. Improvement of aerodynamic performance of an offshore wind turbine blade by moving surface mechanism10.1016/j.oceaneng.2019.106710 ↗
35. Flexural vibration patterning using an array of actuators10.1016/j.jsv.2010.09.027 ↗
36. Excitation of a progressive wave in a flexurally vibrating transmission medium10.7567/jjaps.29s1.179 ↗
37. Morphing wing droop nose with large deformation: ground tests and lessons learned10.3390/aerospace6100111 ↗
38. Feedback tracking control for dynamic morphing of piezocomposite actuated flexible wings10.1016/j.jsv.2017.11.025 ↗
39. Upper surface blowing technology as applied to the YC-14 airplane10.4271/730916 ↗