journal article·2019-05-01

Abnormal grain growth in annealing cast Cu–Al–Mn–V alloys and their superelasticity

Shuiyuan Yang, Mengyuan Chi, Jixun Zhang, Yong Lu, Yixiong Huang, Cuiping Wang, Xingjun Liu

Smart Materials and Structures· Volume 28· Issue 5
Publisher page

Abstract

Abstract Metals are usually difficult to fabricate bulk materials with a large grain size over cm-scale only through heat treatment with neither directional solidification nor macroscopic deformation. This paper reports a novel method to obtain large grains and single crystals over cm-scale only through simply annealing polycrystalline cast Cu–Al–Mn–V shape memory alloys. The results show that the abnormal grain growth (AGG) directly occurs when cast alloys are annealed at 1173 K, and ultra-large grains and single crystals are obtained after quenching. The AGG results from unique microstructure of cast Cu–Al–Mn–V alloys. All cast alloys consist of L2 1 -Cu 2 AlMn parent and completely coherent bcc A2(V) nanoparticles due to bcc phase separation. The results further show that the dissolution of A2(V) nanoparticles into the matrix during annealing results in a continuous misorientation gradient within the matrix grains. It may provide the driving force for the rapid migration of grain boundaries, leading to the AGG. Furthermore, the single crystals close to [90\overset{¯}{1}] exhibit good superelasticity. Cu-13.7Al-8.6Mn-1.4 V single crystal shows the largest full superelasticity of 7.0%, and Cu-13.2Al-9.8Mn-0.7 V single crystal exhibits the largest superelastic strain of 5.4%.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A look into Cu-based shape memory alloys: present scenario and future prospects10.1557/jmr.2014.189 ↗
2. Superelasticity effects and stress-induced martensitic transformations in Cu–Al–Ni alloys10.1016/0001-6160(76)90071-7 ↗
3. Stress-induced martensitic transformations in Cu–Zn–Al and Cu–Zn–Ga alloys10.1051/jphyscol:19824101 ↗
4. Grain size and temperature influence on the toughness of a Cu–Al–Be shape memory alloy10.1016/j.msea.2010.09.034 ↗
5. Mechanical behavior and fracture characterization of a monocrystalline Cu–Al–Ni subjected to thermal cycling treatments under load10.1016/j.matchar.2008.03.001 ↗
6. Studies on the effect of grain refinement and thermal processing on shape memory characteristics of Cu–Al–Ni alloys10.1088/0964-1726/14/5/013 ↗
7. Improvement of shape memory characteristics and mechanical properties copper–zinc–aluminum shape-memory alloy with low aluminum content by grain refinement10.1080/10426910600837756 ↗
8. Effect of grain refinement on the mechanical properties of Cu–Al–Be–B shape memory alloy10.1016/j.matdes.2010.06.038 ↗
9. Effects of grain refinement on the structure and properties of a CuAlMn shape memory alloy10.1016/j.msea.2016.04.009 ↗
10. Phase equilibria and Heusler phase stability in the Cu-rich portion of the Cu–Al–Mn system10.1016/S0925-8388(97)00425-8 ↗
11. Martensitic transformation in Cu–Mn–Al alloys10.1016/0956-716X(95)00292-4 ↗
12. Thermoelastic martensite and shape memory effect in ductile Cu–Al–Mn alloys10.1007/BF02651873 ↗
13. Effect of grain size and texture on pseudoelasticity in Cu–Al–Mn-based shape memory wire10.1016/j.actamat.2005.05.013 ↗
14. Effects of aging on stress-induced martensitic transformation in ductile Cu–Al–Mn-based shape memory alloys10.1016/j.actamat.2009.08.011 ↗
15. Effects of aging on bainitic and thermally induced martensitic transformation in ductile Cu–Al–Mn-based shape memory alloys10.1016/j.actamat.2009.08.003 ↗
16. Abnormal grain growth induced by cyclic heat treatment10.1126/science.1238017 ↗
17. Ultra-large single crystals by abnormal grain growth10.1038/s41467-017-00383-0 ↗
18. Abnormal grain growth induced by cyclic heat treatment in Fe–Mn–Al–Ni superelastic alloy10.1016/j.matdes.2016.04.011 ↗
19. Stress-induced martensitic transformations in Cu–Zn–Al and Cu–Zn–Ga alloys10.1051/jphyscol:19824101 ↗
20. Superelasticity and shape memory effect in Cu-23at%Al-7at%Mn alloy single crystals10.1016/0956-7151(94)90153-8 ↗
21. Structure changes during pseudoelastic deformation of CuAlMn single crystals10.1016/1359-6454(96)00086-9 ↗
22. Cyclic stress–strain response of superelastic Cu–Al–Mn alloy single crystals10.1016/S0921-5093(98)01095-8 ↗
23. The reorientation of the 2H martensite phase in Cu–Al–Mn shape memory single crystal alloy10.1016/j.msea.2007.02.163 ↗
24. Production and characterization of large single crystals made of ferromagnetic shape memory alloys in Ni–Mn–Ga10.1016/j.phpro.2010.11.079 ↗
25. New development in electrical strip steels characterized by fine grain structure approaching the properties of a single crystal
26. The production of single crystals of aluminium and their tensile properties10.1098/rspa.1921.0089 ↗
27. Humphreys · 2004
28. Annealing of cold-worked austenitic stainless steels10.2355/isijinternational.43.135 ↗
29. Dynamic abnormal grain growth: a new method to produce single crystal10.1016/j.scriptamat.2009.07.021 ↗
30. A method of producing a long single crystal of aluminium drawn wire
31. A method of producing a long single-crystal wire of aluminium with any desired crystallographic axis
32. Low-cost Cu-based shape memory single crystals obtained by abnormal grain growth showing excellent superelasticity10.1016/j.mtla.2018.100200 ↗
33. Effect of grain refinement on the mechanical and shape memory properties of Cu–Al–Mn base alloys10.1051/jp4:2001832 ↗
34. Grain size dependence of pseudoelasticity in polycrystalline Cu–Al–Mn-based shape memory sheets10.1016/j.actamat.2013.03.022 ↗
35. Phase equilibira in the Cu-rich portion of the Cu–Al binary system10.1016/S0925-8388(97)00235-1 ↗
36. A new type of Cu–Al–Ta shape memory alloy with high martensitic transformation temperature10.1088/0964-1726/23/2/025018 ↗
37. Microstructure and properties of Cu–Al–Fe high-temperature shape memory alloys10.1016/j.mseb.2014.02.001 ↗
38. Okamota · 1996
39. Kinetics of strain-induced morphological transformation in cubic alloys with a miscibility gap10.1016/0956-7151(93)90359-Z ↗