journal article·2020-08-01

Feasibility study of a touch-enabled active sensing approach to inspecting subsea bolted connections using piezoceramic transducers

Jinwei Jiang, Siu Chun Michael Ho, Taylor Tippitt, Zheng Chen, Gangbing Song

Smart Materials and Structures· Volume 29· Issue 8
Publisher page

Abstract

Abstract Pipelines that stretch on for miles and miles are linked together through a multitude of bolted connections. However, each bolted connection represents a point of vulnerability that can suffer from leakage. In subsea environments, leakage can spread farther and cause even more disastrous to both economy and environment. A number of structural health monitoring methods have been proposed and explored. However, most monitoring methods require permanent installation of sensors on the structures to be monitored, which can be difficult for subsea locations. In this paper, a piezoceramic transducer enabled touch-based active sensing approach is proposed to inspect subsea bolted connections without the requirement of permanent installation of sensors on the structures. The proposed approach also aims for an easy integration with a subsea robotic system, such as a remotely operated vehicle (ROV) for bolted connection inspection. To study the feasibility of the proposed approach, a spring-loaded C-clamp shaped device that mimics two robotic fingers equipped with a pair of piezoceramic transducers is designed and fabricated. Two piezoceramic transducers are mounted on the inner surfaces of the two robotic fingers. In addition, a pair of permanent magnets are employed to ensure a temporary while constant coupling between the transducers and the both surfaces of the bolt connection, upon touching. In this way, one piezoceramic transducer generates stress waves that propagate across the connection interface, and the other PZT transducer detects the propagating stress wave. By analyzing the received stress wave signals via spectrograms and wavelet packet transformation, the status of the connection can be derived. Experimental investigations are performed on a bolted connection with different applied torques in air and in salt water (3.5% salinity), and results demonstrate effectiveness of the proposed touch-enabled active sensing for inspection of submerged bolted connection.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Advanced Fiber Optic Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Review of flow rate estimates of the deepwater horizon oil spill10.1073/pnas.1112139108 ↗
2. Experimental studies on the effectiveness and robustness of a pounding tuned mass damper for vibration suppression of a submerged cylindrical pipe10.1002/stc.2027 ↗
3. Fatigue analysis of damaged steel pipelines under cyclic internal pressure10.1016/j.ijfatigue.2008.09.006 ↗
4. Slurry erosion of pipeline steel: effect of velocity and microstructure10.1115/1.4031599 ↗
5. Erosion behaviour of API X100 pipeline steel at various impact angles and particle speeds10.3390/met6100232 ↗
6. Feasibility study of steel bar corrosion monitoring using a piezoceramic transducer enabled time reversal method10.3390/app8112304 ↗
7. An experimental feasibility study of pipeline corrosion pit detection using a piezoceramic time reversal mirror10.1088/0964-1726/25/3/037002 ↗
8. Flexural behavior of corroded HPS beams10.1016/j.engstruct.2019.06.006 ↗
9. A new analytical method of strain and deformation of pipeline under fault movement10.1016/j.ijpvp.2019.03.005 ↗
10. Dynamic response of buried pipeline subject to impact loads using piezoceramic transducers10.1016/j.ijpvp.2019.103984 ↗
11. Underwater pipeline impact localization using piezoceramic transducers10.1088/1361-665X/aa80c9 ↗
12. QC-FIT evaluation of connector and bolt failures summary of findings; QC-FIT report #2014-01
13. Inspection and monitoring systems subsea pipelines: a review paper10.1177/1475921719837718 ↗
14. Structural monitoring and identification of civil infrastructure in the united states10.12989/smm.2016.3.1.051 ↗
15. An improved method for pipeline leakage localization with a single sensor based on modal acoustic emission and empirical mode decomposition with Hilbert transform10.1109/JSEN.2020.2971854 ↗
16. Advances and challenges in impedance-based structural health monitoring10.12989/smm.2017.4.4.301 ↗
17. Debonding detection of reinforced concrete (RC) beam with near-surface mounted (NSM) pre-stressed carbon fiber reinforced polymer (CFRP) plates using embedded piezoceramic smart aggregates (SAs)10.3390/app10010050 ↗
18. New entropy-based vibro-acoustic modulation method for metal fatigue crack detection: an exploratory study10.1016/j.measurement.2019.107075 ↗
19. Cyclic crack monitoring of a reinforced concrete column under simulated pseudo-dynamic loading using piezoceramic-based smart aggregates10.3390/app6110341 ↗
20. Bolt preload measurement based on the acoustoelastic effect using smart piezoelectric bolt10.1088/1361-665X/ab06dc ↗
21. Monitoring of early looseness of multi-bolt connection: a new entropy-based active sensing method without saturation10.1088/1361-665X/ab3a08 ↗
22. Design of a new vision-based method for the bolts looseness detection in flange connections10.1109/TIE.2019.2899555 ↗
23. Bolt loosening angle detection technology using deep learning10.1002/stc.2292 ↗
24. Vision-based technique for bolt-loosening detection in wind turbine tower10.12989/was.2015.21.6.709 ↗
25. Bolt, stud or fastener having an embedded fiber optic Bragg grating sensor for sensing tensioning strain
26. A smart “shear sensing” bolt based on FBG sensors10.1016/j.measurement.2018.03.026 ↗
27. Khomenko · 2016 · 8 · 26110.1007/978-3-319-21611-9_32 ↗
28. Contact acoustic nonlinearity (CAN)-based continuous monitoring of bolt loosening: hybrid use of high-order harmonics and spectral sidebands10.1016/j.ymssp.2017.10.009 ↗
29. Bolt loosening analysis and diagnosis by non-contact laser excitation vibration tests10.1016/j.ymssp.2013.05.023 ↗
30. Tapping and listening: a new approach to bolt looseness monitoring10.1088/1361-665X/aac962 ↗
31. Bolt loosening detection based on audio classification10.1177/1369433219852565 ↗
32. Modeling and analysis of an impact-acoustic method for bolt looseness identification10.1016/j.ymssp.2019.106249 ↗
33. Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review10.1088/0964-1726/17/3/033001 ↗
34. Identification of the structural damage mechanism of BFRP bars reinforced concrete beams using smart transducers based on time reversal method10.1016/j.conbuildmat.2019.06.056 ↗
35. PZT transducer array enabled pipeline defect locating based on time-reversal method and matching pursuit de-noising10.1088/1361-665X/ab1cc9 ↗
36. A feasibility study on timber moisture monitoring using piezoceramic transducer-enabled active sensing10.3390/s18093100 ↗
37. Monitoring of epoxy-grouted bonding strength development between an anchored steel bar and concrete using PZT-enabled active sensing10.3390/s19092096 ↗
38. Bolted joint integrity monitoring with second harmonic generated by guided waves10.1177/1475921718814399 ↗
39. Proof-of-concept study of monitoring bolt connection status using a piezoelectric based active sensing method10.1088/0964-1726/22/8/087001 ↗
40. Monitoring of multi-bolt connection looseness using entropy-based active sensing and genetic algorithm-based least square support vector machine10.1016/j.ymssp.2019.106507 ↗
41. Monitoring of multi-bolt connection looseness using a novel vibro-acoustic method10.1007/s11071-020-05508-7 ↗
42. Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: I Experiment10.1088/0964-1726/17/3/035008 ↗
43. A PZT-based electromechanical impedance method for monitoring the soil freeze–thaw process10.3390/s19051107 ↗
44. Impedance based bolt pre-load monitoring using piezoceramic smart washer10.1088/1361-665X/aa6a8e ↗
45. Combination of longitudinal and transverse ultrasonic waves for in situ control of the tightening of bolts10.1115/1.2748821 ↗
46. Estimation of clamping force in high-tension bolts through ultrasonic velocity measurement10.1016/j.ultras.2006.05.190 ↗
47. Structural health monitoring of bolted joints using linear and nonlinear acoustic/ultrasound methods10.1177/1475921710395810 ↗
48. Cohen · 1995 · 778
49. Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I diagnostics10.1088/0964-1726/13/3/020 ↗
50. Time–frequency and time–scale analyses for structural health monitoring. philosophical transactions of the royal society of london a: mathematical10.1098/rsta.2006.1936 ↗
51. A time–frequency analysis approach for condition monitoring of a wind turbine gearbox under varying load conditions10.1016/j.ymssp.2015.03.003 ↗
52. Joint time-frequency analysis10.1109/79.752051 ↗
53. Time-frequency representation of digital signals and systems based on short-time Fourier analysis10.1109/TASSP.1980.1163359 ↗
54. Wavelet packet feature extraction for vibration monitoring10.1109/41.847906 ↗
55. Statistical wavelet-based method for structural health monitoring10.1061/(ASCE)0733-9445(2004)130:7(1055) ↗
56. Wavelet packet based damage identification of beam structures10.1016/j.ijsolstr.2005.04.031 ↗
57. Convolution wavelet packet transform and its applications to signal processing10.1016/j.dsp.2010.01.007 ↗
58. Time domain signal analysis using wavelet packet decomposition approach10.4236/ijcns.2010.33041 ↗