journal article·2020-09-01

Multifunctional flexible sensor array-based damage monitoring for switch rail using passive and active sensing

Pan Hu, Haitao Wang, Guiyun Tian, Yang Liu, Xin Li, Billie F Spencer

Smart Materials and Structures· Volume 29· Issue 9
Publisher page

Abstract

Abstract A passive monitoring technique for switch rails will be very attractive because it does not require extra excitations and can realize large area monitoring. However, complex wheel-rail interactions and sparse sensors will affect the accuracy of local damage identification. In contrast, an active monitoring technique has high local damage quantification ability but has low efficiency for large area monitoring. This study firstly presents a combination of piezoceramic material Lead zirconate titanate (PZT) wafers with accelerometers to configure a multifunctional sensor array that brings together active and passive monitoring mechanisms. The multifunctional sensor arrays are produced in a flexible form, which are adapted to complex geometry and are easy to install. In complementary passive monitoring, each sub area’s health state between 2 accelerometers is represented by reconstructing transfer functions, which are calculated from rail vibrations. The reconstructed transfer function in conjunction with principal component analysis (PCA)-based feature extraction is utilized for estimating the damaged sub area. Then accurate local damage identification can be realized through the active guided waves technique and correlation-based diagnostic imaging in conjunction with singular value decomposition (SVD). Simulation and experimental studies show the proposed mechanisms can identify the damaged sub area and basically extract damage locations with different lengths correctly with the sparse sensor array. Finally, based on a controlled experiment, the causes of the errors are evaluated and analyzed. The proposed mechanism can simplify data analysis, save monitoring time, and decrease the final cost.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Rail defects: an overview10.1046/j.1460-2695.2003.00693.x ↗
2. Analysis of causes of major train derailment and their effect on accident rates10.3141/2289-20 ↗
3. Inspection of turnouts and crossing state of the art report-20 preliminary report
4. Rail flaw detection: overview and needs for future developments10.1016/j.ndteint.2003.06.002 ↗
5. Track Inspector Rail Defect reference manual
6. Guided wave inspection potential of defects in rail10.1016/j.ndteint.2003.04.001 ↗
7. Contemporary inspection and monitoring for high-speed rail system10.5772/intechopen.81159 ↗
8. Comparison study of different features for pocket length quantification of angular defects using Eddy current pulsed thermography10.1109/TIM.2018.2890053 ↗
9. Piezoelectric transducer-based structural health monitoring for aircraft applications10.3390/s19030545 ↗
10. Stanford multiactuator–receiver transduction (SMART) layer technology and its applications10.1002/9780470061626.shm098 ↗
11. Damage detection based on sparse virtual element boundary measurement using metal-core piezoelectric fiber10.1177/1475921716682515 ↗
12. IQ signal based RFID sensors for defect detection and characterisation10.1016/j.sna.2017.11.008 ↗
13. Strain gauges debonding fault detection for structural health monitoring10.1002/stc.2264 ↗
14. Monitoring fatigue-induced transverse matrix cracks in laminated composites using built-in acousto-ultrasonic techniques10.1177/1475921716636333 ↗
15. Fiber Bragg grating based sensing system: early corrosion detection for structural health monitoring10.1016/j.sna.2016.04.028 ↗
16. Guided Lamb waves for identification of damage in composite structures: a review10.1016/j.jsv.2006.01.020 ↗
17. Recent progress in flexible and stretchable piezoelectric devices for mechanical energy harvesting, sensing and actuation10.1016/j.eml.2016.05.015 ↗
18. High performance flexible actuator of urchin‐like ZnO nanostructure/polyvinylenefluoride hybrid thin film with graphene electrodes for acoustic generator and analyzer10.1002/smll.201503869 ↗
19. Flexible piezoelectric ZnO–paper nanocomposite strain sensor10.1002/smll.201000254 ↗
20. Active vibration and noise control for the interior of a car body by PVDF actuator and sensor arrays
21. A hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring10.1088/0964-1726/14/3/012 ↗
22. Health monitoring of rail structures using guided waves and three‐dimensional diagnostic imaging10.1002/stc.1966 ↗
23. Damage localization in ambient vibration by constructing proportional flexibility matrix10.1016/j.jsv.2004.06.046 ↗
24. Sensor fault management techniques for wireless smart sensor networks in structural health monitoring10.1002/stc.2362 ↗
25. Investigation of dynamic properties of long‐span cable‐stayed bridges based on one‐year monitoring data under normal operating condition10.1002/stc.2146 ↗
26. State-of-the-art review of railway track resilience monitoring10.3390/infrastructures3010003 ↗
27. Review of trackside monitoring solutions: from strain gages to optical fibre sensors10.3390/s150820115 ↗
28. RFID based Battery-Free Sensor Node for Smart Railway Application using 3D-Printing Technology10.1109/FLEPS.2019.8792251 ↗
29. Rail crack monitoring using fiber optic based ultrasonic guided wave detection technology10.12783/shm2017/14057 ↗
30. Proposed rail pad sensor for wheel-rail contact force monitoring10.1088/1361-665X/aadc8d ↗
31. An outlier analysis of MFC-based impedance sensing data for wireless structural health monitoring of railroad tracks10.1016/j.engstruct.2008.02.019 ↗
32. Damage detection in ambient vibration using proportional flexibility matrix with incomplete measured DOFs10.1002/stc.149 ↗
33. Passive extraction of dynamic transfer function from arbitrary ambient excitations: application to high-speed rail inspection from wheel-generated waves10.1115/1.4037517 ↗
34. Multiresonance chipless RFID sensor tag for metal defect characterization using principal component analysis10.1109/JSEN.2019.2917840 ↗
35. Practical long range guided wave inspection-applications to pipes and rail
36. Correlation-based imaging technique for fatigue monitoring of riveted lap-joint structure10.1088/0964-1726/23/5/055007 ↗
37. Sparse sensor networks for active structural health monitoring using highly integrated CMOS transceivers10.1117/12.2296664 ↗
38. Impact damage detection and identification using eddy current pulsed thermography through integration of PCA and ICA10.1109/JSEN.2014.2301168 ↗
39. Principal component analysis: a review and recent developments10.1098/rsta.2015.0202 ↗
40. Q-statistic and T2-statistic PCA-based measures for damage assessment in structures10.1177/1475921710388972 ↗
41. Surface wave modes in rails10.1121/1.2211587 ↗
42. In situ health monitoring for bogie systems of CRH380 train on Beijing–Shanghai high-speed railway10.1016/j.ymssp.2013.11.017 ↗
43. Railway industry standard of the People’s Republic of China TB/T1778-2010
44. A comparison of embedded sensor Lamb wave ultrasonic tomography approaches for material loss detection10.1088/0964-1726/15/4/007 ↗
45. Dynamic interaction between a lumped mass vehicle and a discretely supported continuous rail track10.1016/S0045-7949(96)00401-4 ↗
46. MATLAB 2018b
47. Damage detection in shear buildings using different estimated curvature10.1002/stc.2050 ↗
48. Wireless localization of spallings in switch-rails with guided waves based on a time-frequency method10.1109/JSEN.2019.2934159 ↗