Position/force modeling and analysis of a piezo-driven compliant micro-gripper considering the dynamic impacts of gripping objects
Source abstract
Abstract
Abstract The compliant micro-gripper driven by piezo actuator has emerged as a representative end-effector in micro-manipulations. To achieve high performance gripping of tiny and fragile objects, the switched position/force modeling approach has been well explored for such systems. In the present work, we investigate a lever-bridge-lever type piezo-driven compliant micro-gripper and develop a new position/force model to describe both kineto-statics and dynamics of the micro-gripper, where the free motion and gripping motion states in the manipulation process are unified in the modeling approach. In particular, the impacts of gripping objects on the dynamic properties of the gripper (in gripping motion state) are incorporated by considering the gripping object as a spring-damper system with a characteristic length. With this, the dynamic model can better predict the position of the gripping jaw and the contact position of the object, as well as the force applied on the object, which also offers the capability to estimate the stiffness of unknown objects in manipulations. Various gripping experiments with soft and stiff objects of different dimensions are conducted, which demonstrate the effectiveness and accuracy of the proposed modeling approach.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Piezoelectric Actuators and Control · Advanced MEMS and NEMS Technologies · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Design and experimental testing of an electro-thermal microgripper for cell manipulation10.1007/s00542-017-3460-3 ↗
2. Force sensor integrated surgical forceps for minimally invasive robotic surgery10.1109/TRO.2015.2473515 ↗
3. Toward medical devices with integrated mechanisms, sensors and actuators via printed-circuit MEMS10.1115/1.4035375 ↗
4. Three-dimensional heterogeneous assembly of coded microgels using an untethered mobile microgripper10.1039/C5LC00009B ↗
5. Design and control of a multi-DOF micromanipulator dedicated to multiscale micromanipulation10.1088/1361-665X/aa8f73 ↗
6. Monolithically fabricated microgripper with integrated force sensor for manipulating microobjects and biological cells aligned in an ultrasonic field10.1109/JMEMS.2006.885853 ↗
7. Single active finger IPMC microgripper10.1088/0964-1726/24/2/025015 ↗
8. Design of a compliant gripper with multimode jaws10.1115/1.4039498 ↗
9. Fast-response, stiffness-tunable soft actuator by hybrid multimaterial 3D printing10.1002/adfm.201806698 ↗
10. Development and force/position control of a new hybrid thermo-piezoelectric microgripper dedicated to micromanipulation tasks10.1109/TASE.2011.2157683 ↗
11. Design and control of a compliant microgripper with a large amplification ratio for high-speed micro manipulation10.1109/TMECH.2016.2523564 ↗
12. Design and smooth position/force switching control of a miniature gripper for automated microhandling10.1109/TII.2013.2290895 ↗
13. A monolithic force-sensitive 3D microgripper fabricated on the tip of an optical fiber using 2-photon polymerization10.1002/smll.201703964 ↗
14. A novel design and fabrication of a micro-gripper for manipulation of micro-scale parts actuated by a bending piezoelectric10.1007/s00542-019-04696-6 ↗
15. A novel monolithic piezoelectric actuated flexure-mechanism based wire clamp for microelectronic device packaging10.1063/1.4918621 ↗
16. A new piezo-driven microgripper based on the double-rocker mechanism10.1088/0964-1726/24/7/075031 ↗
17. Howell · 2001
18. Modeling and prototyping of an underactuated gripper exploiting joint compliance and modularity10.1109/LRA.2018.2845906 ↗
19. A monolithic compliant piezoelectric-driven microgripper: design, modeling and testing10.1109/TMECH.2011.2163200 ↗
20. A pseudo-static model for dynamic analysis on frequency domain of distributed compliant mechanisms10.1115/1.4040700 ↗
21. Grasp mode and compliance control of an under-actuated origami gripper using adjustable stiffness joints10.1109/TMECH.2017.2732827 ↗
22. Design of a monolithic double-slider based compliant gripper with large displacement and anti-buckling ability10.3390/mi10100665 ↗
23. Design and test of a compact compliant gripper using the Scott–Russell mechanism10.1007/s43452-020-00085-3 ↗
24. Design and analysis of a large-range precision micromanipulator10.1088/1361-665X/ab4413 ↗
25. A switching position/force controller for two independent finger gripper over ROS10.1109/CONIELECOMP.2017.7891813 ↗
26. Design and control of a passive compliant piezo-actuated micro-gripper with hybrid flexure hinges10.1109/TIE.2020.3032921 ↗
27. Design and analysis of a compliant micro-gripper with LBL type displacement amplifier10.1109/3M-NANO46308.2019.8947391 ↗
28. Development of a novel flexure-based microgripper for high precision micro-object manipulation10.1016/j.sna.2009.01.016 ↗
29. Vision-based micro-manipulations in simulation10.1007/s00542-020-05072-5 ↗
30. Analysis of the displacement amplification ratio of bridge-type mechanism10.1016/j.mechmachtheory.2014.12.013 ↗
31. Adaptive sliding-mode position control for piezo-actuated stage10.1109/TIE.2008.926768 ↗
32. An analytical generalized Prandtl–Ishlinskii model inversion for hysteresis compensation in micropositioning control10.1109/TMECH.2010.2052366 ↗
33. Effects of strain rate, mixing ratio and stress–strain definition on the mechanical behavior of the polydimethylsiloxane (PDMS) material as related to its biological applications10.1007/s10544-008-9256-6 ↗