journal article·2021-09-01Open access

A hyperelastic porous media framework for ionic polymer-metal composite actuators and sensors: thermodynamically consistent formulation and nondimensionalization of the field equations

Zakai J Olsen, Kwang J Kim

Smart Materials and Structures· Volume 30· Issue 9

Abstract

Abstract Ionic polymer-metal composites (IPMCs) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. The current literature is sparce in multiphysics models that account for large deformations, coupled ion-solvent transport, the porous structure of the membrane, and lossy electrodes under finite-strains. This study addresses this by developing a new, hyperelastic porous media modeling framework for IPMCs using the principles of continuum thermodynamics and multiphasic materials. This framework compactly captures the broadest strokes of IPMC modeling methodologies, summarizing them in the form of general constitutive requirements placed on thermodynamic potential describing the polymer skeleton. A simple IPMC model is derived under this framework which captures the finite-strain deformation of a hyperelastic material, accounting for the coupled ion-solvent transport through the porous polymer, and resistive electrodes deforming with the skeleton. The resulting governing equations are further cast into a generalized nondimensional formulation, and an expansive set of unique dimensionless Π -groups are derived for IPMC actuator and sensor devices. This new framework and the nondimensional formulation lay the groundwork for future research and an expansive characterization of IPMC transduction phenomena via dimensional analysis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Electroactive polymers as artificial muscles: a review10.2514/2.3902 ↗
2. Soft actuators for small-scale robotics10.1002/adma.201603483 ↗
3. Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators-artificial muscles - a review10.1088/0964-1726/7/6/001 ↗
4. Ionic polymer-metal composites for underwater operation10.1177/1045389X06063468 ↗
5. Conceptual design, kinematics and dynamics of swimming robotic structures using ionic polymeric gel muscles10.1088/0964-1726/1/1/014 ↗
6. An artificial muscle actuator for biomimetic underwater propulsors10.1088/1748-3182/2/2/S04 ↗
7. Ionic polymer-metal composites: I. Fundamentals10.1088/0964-1726/10/4/327 ↗
8. Ionic polymer-metal composites: II. Manufacturing techniques10.1088/0964-1726/12/1/308 ↗
9. Ionic polymer-metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles10.1088/0964-1726/13/6/009 ↗
10. Ionic polymer-metal composites: IV. Industrial and medical applications10.1088/0964-1726/14/1/020 ↗
11. Recent advances in ionic polymer-metal composite actuators and their modeling and applications10.1016/j.progpolymsci.2013.04.003 ↗
12. The state of understanding of ionic polymer metal composite architecture: a review10.1088/0964-1726/20/8/083001 ↗
13. Kim · 2007 · 153
14. A review of ionic polymeric soft actuators and sensors10.1089/soro.2013.0006 ↗
15. Clustering of ions in organic polymers. A theoretical approach10.1021/ma60014a006 ↗
16. Micromechanical analysis of ionic clustering in nafion perfluorinated membrane10.1016/S0167-6636(00)00002-8 ↗
17. Elastic theory for ionic clustering in perfluorinated ionomers10.1021/ma00229a020 ↗
18. Simple model for clustering and ionic transport in ionomer membranes10.1021/ma00139a011 ↗
19. Searching for a new ionomer for 3D printable ionic polymer–metal composites: aquivion as a candidate10.1088/1361-665X/aa919f ↗
20. Understanding the thermal properties of precursor-ionomers to optimize fabrication processes for ionic polymer-metal composites (IPMCs)10.3390/ma11050665 ↗
21. Dynamic model of ion and water transport in ionic polymer-metal composites10.1063/1.3668286 ↗
22. Physics of size selectivity10.1103/PhysRevLett.95.247801 ↗
23. Minton · 2013
24. Hydration of ions in aqueous solution10.1007/BF01170989 ↗
25. Comparative experimental study of ionic polymer-metal composites with different backbone ionomers and in various cation forms10.1063/1.1563300 ↗
26. The thermodynamics of electrolytes at higher concentration10.1021/j150519a007 ↗
27. Hydration interactions: aqueous solvent effects in electric double layers10.1103/physreve.62.5296 ↗
28. Transport processes in ionic membranes10.1039/tf9585401408 ↗
29. A nonlinear model for ionic polymer metal composites as actuators10.1088/0964-1726/16/1/001 ↗
30. Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles—a review10.1088/0964-1726/7/6/001 ↗
31. Artificial muscle technology: physical principles and naval prospects10.1109/JOE.2004.833135 ↗
32. Electromechanical response of ionic polymer-metal composites10.1063/1.372343 ↗
33. Mechanics and electrochemistry of ionic polymer metal composites10.1016/j.jmps.2014.07.006 ↗
34. Modeling back-relaxation in ionic polymer metal composites: the role of steric effects and composite layers10.1063/1.5004573 ↗
35. Dynamic curvature sensing employing ionic-polymer-metal composite sensors10.1088/0964-1726/20/9/094011 ↗
36. Lim · 201210.1117/12.915753 ↗
37. Derivation of a continuum model and its electric equivalent-circuit representation for ionic polymer-metal composite (IPMC) electromechanics10.1088/0964-1726/15/2/019 ↗
38. A model for ionic polymer metal composites as sensors10.1088/0964-1726/15/3/010 ↗
39. An electromechanical model for sensing and actuation of ionic polymer metal composites10.1088/0964-1726/18/1/015016 ↗
40. Nonlinear sensing of ionic polymer metal composites10.1007/s00161-012-0253-x ↗
41. Mechanoelectric effects in ionic gels10.1209/epl/i2000-00299-3 ↗
42. Modeling and simulation of the chemo-electro-mechanical behavior of ionic polymer-metal composites10.1063/1.4826070 ↗
43. Multiphysics of ionic polymer-metal composite actuator10.1063/1.4818412 ↗
44. An equivalent circuit model for ionic polymer-metal composites and their performance improvement by a clay-based polymer nano-composite technique10.1177/104538903038024 ↗
45. A reduced dimensional mapping approach for modeling IPMCs with computational efficiency and rapid design development applications10.1088/1361-665X/aae8fc ↗
46. A physics-based model of the electrical impedance of ionic polymer metal composites10.1063/1.4729051 ↗
47. Coupled chemo-electro-mechanical formulation for ionic polymer gels––numerical and experimental investigations10.1016/S0167-6636(03)00068-1 ↗
48. An explicit physics-based model of ionic polymer-metal composite actuators10.1063/1.3650903 ↗
49. Thermodynamically consistent three-dimensional electrochemical model for polymeric membranes10.1016/j.electacta.2018.06.174 ↗
50. Thermodynamically consistent electro-chemo-mechanical model for polymer membranes10.1117/12.2295726 ↗
51. Thermodynamical modeling of the electromechanical behavior of ionic polymer metal composites10.1177/1045389X08096356 ↗
52. Thermodynamically based multiphysic modeling of ionic polymer metal composites10.1177/1045389X11417195 ↗
53. The multiplicative decomposition of the deformation gradient in the multiphysics modeling of ionic polymers10.1016/j.ijnonlinmec.2013.01.005 ↗
54. Electro-chemical aspects of IPMCs within the framework of the theory of porous media10.1088/1361-665X/aa590e ↗
55. A mixture theory framework for modeling the mechanical actuation of ionic polymer metal composites10.1088/0964-1726/17/4/045010 ↗
56. Modeling actuation and sensing in ionic polymer metal composites by electrochemo-poromechanics10.1016/j.jmps.2021.104292 ↗
57. Acartürk · 2009
58. Coussy · 2004
59. General coupling of porous flows and hyperelastic formulations—from thermodynamics principles to energy balance and compatible time schemes10.1016/j.euromechflu.2014.02.009 ↗
60. Gurtin · 2010
61. Electrostatic forces and stored energy for deformable dielectric materials10.1115/1.1940661 ↗
62. Electrostriction in elastic dielectrics undergoing large deformation10.1063/1.3031483 ↗
63. Noll · 1974 · 14510.1007/978-3-642-65817-4_9 ↗
64. Thermodynamics with internal state variables10.1063/1.1711937 ↗
65. A solid–fluid mixture theory of porous media10.1016/j.ijengsci.2014.07.002 ↗
66. Method of lagrange multipliers for exploitation of the entropy principle10.1007/BF00250688 ↗
67. On entropy flux-heat flux relation in thermodynamics with lagrange multipliers10.1007/s001610050042 ↗
68. A historical note on the entropy principle of Müller and Liu10.1007/s001610100063 ↗
69. Truesdell · 2004
70. A general approach to isothermal hyperelastic modelling of saturated porous media at finite strains with compressible solid constituents10.1098/rspa.2010.0018 ↗
71. Karl · 1943
72. Reciprocal relations in irreversible processes. I.10.1103/PhysRev.37.405 ↗
73. Reciprocal relations in irreversible processes. II.10.1103/PhysRev.38.2265 ↗
74. Modelling compression sensing in ionic polymer metal composites10.1088/1361-665X/26/3/035030 ↗
75. Pugal · 2012
76. Relating microscopic charge movement to macroscopic currents: the Ramo-Shockley theorem applied to ion channels10.1529/biophysj.104.047548 ↗
77. Weber · 2004 · 104 · 467910.1021/cr020729l ↗
78. Nonequilibrium thermodynamics of porous electrodes
79. Electrical impedance controls mechanical sensing in ionic polymer metal composites10.1103/PhysRevE.88.062603 ↗
80. A dynamic model for ionic polymer-metal composite sensors10.1088/0964-1726/16/4/063 ↗
81. Pugal · 2016 · 185
82. Electrode of ionic polymer-metal composite sensors: modeling and experimental investigation10.1063/1.4876255 ↗
83. A comprehensive physics-based model encompassing variable surface resistance and underlying physics of ionic polymer-metal composite actuators10.1063/1.4931912 ↗
84. Rough interface in IPMC: modeling and its influence analysis10.1088/1361-665X/aaca59 ↗
85. Nanothorn electrodes for ionic polymer-metal composite artificial muscles10.1038/srep06176 ↗
86. The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles10.1088/0964-1726/9/4/318 ↗
87. Conservation of charge at an interface10.1016/j.optcom.2006.03.024 ↗
88. Gupta · 2009 · 120
89. Slattery · 2007
90. Aris · 1962
91. McConnell · 1957
92. Thermomechanics of the Interface between a body and its environment10.1007/s00161-007-0053-x ↗
93. Transport relations for surface integrals arising in the formulation of balance laws for evolving fluid interfaces10.1017/S0022112005006695 ↗
94. Large deformation and electrochemistry of polyelectrolyte gels10.1016/j.jmps.2010.01.005 ↗
95. Curled actuated shapes of ionic polymer metal composites strips10.1063/1.4810919 ↗
96. An alternative explanation of back-relaxation in ionic polymer metal composites10.1016/j.eml.2017.01.009 ↗
97. Multiaxial deformations of ionic polymer metal composites10.1016/j.ijengsci.2020.103227 ↗
98. Gantmacher · 1960
99. Transport of water and ions in partially water-saturated porous media. Part 1. Constitutive equations10.1016/j.advwatres.2016.02.006 ↗
100. Effect of solvents on the chemical and physical properties of ionic polymer-metal composites10.1063/1.2194127 ↗