Mechanical characterization of auxetic stainless steel thin sheets with reentrant structure
Source abstract
Abstract
Abstract Smart materials in auxetic form present a great potential for various medical applications due to their unique deformation mechanisms along with durable infrastructure. Both analytical and finite element (FE) models are extensively used in literature to characterize mechanical response of auxetic structures but these structures are mostly thick enough to be considered as bulk material and 3D inherently. Auxetic plates in very thin form, a.e. foil, may bring numerous advantages such as very light design and better biodegradability when needed. However, there is a gap in literature on mechanical characterization of auxetic thin plates. In this study, structural analysis of very thin auxetic plates under uniaxial loading is investigated using both FE method and experimental method. 25 μ m thick stainless steel (316L) plates are fabricated with reentrant texture for three different unit cell dimensions and tested under uniaxial loading using universal testing machine. 25 and 50 μ m thick sheets with same cell dimensions were analyzed using implicit transient FE model including strain hardening and failure behaviors. FE results cover all the deformation schemes seen in actual tests and total deformation level matches with test results. Effect of plate thickness and cell geometry on auxetic behavior is discussed in detail using FE results. Finally, based on FE analysis results, an optimum geometry for prolonged auxetic behavior, high flexibility and high durability is suggested for future potential applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Bursa Technical University
University of Victoria
Purdue University, IN,
Funding
TUBITAK, THE SCIENTIFIC AND TECHNOLOGICAL RESEARCH COUNCIL OF TURKEY
References (41)
Show source-provided references
1. Auxetic oesophageal stents: structure and mechanical properties10.1007/s10856-013-5067-2 ↗
2. An auxetic structure configured as oesophageal stent with potential to be used for palliative treatment of oesophageal cancer; development and in vitro mechanical analysis10.1007/s10856-011-4436-y ↗
3. Controlled ripple texturing of suspended graphene and ultrathin graphite membranes10.1038/nnano.2009.191 ↗
4. Design and fabrication of stent with negative Poisson’s ratio
5. Dynamic behaviour of auxetic gradient composite hexagonal honeycombs10.1016/j.compstruct.2016.03.044 ↗
6. Geometry and physics of wrinkling10.1103/PhysRevLett.90.074302 ↗
7. Davis · 1994
8. Elastoplasticity of auxetic materials10.1016/j.commatsci.2012.03.036 ↗
9. Auxetic polymers: a new range of materials10.1016/0160-9327(91)90123-S ↗
10. The design of doubly curved sandwich panels with honeycomb cores10.1016/0263-8223(91)90064-6 ↗
11. Gandhi · 1992
12. The mechanics of three-dimensional cellular materials10.1098/rspa.1982.0088 ↗
13. Gibson · 1999
14. Spherical deformation of compliant substrates with semiconductor device islands10.1063/1.1634370 ↗
15. Numerical study of the wrinkling of a stretched thin sheet10.1016/j.ijsolstr.2011.11.018 ↗
16. Foam structures with a negative Poisson’s ratio10.1126/science.235.4792.1038 ↗
17. Materials with structural hierarchy10.1038/361511a0 ↗
18. Advances in negative Poisson’s ratio materials10.1002/adma.19930050416 ↗
19. Indentability of conventional and negative Poisson’s ratio foams10.1177/002199839302701203 ↗
20. Design considerations for negative Poisson ratio structures under large deflection for MEMS applications10.1088/0964-1726/15/5/035 ↗
21. Stress concentration, fracture and damage in auxetic materials
22. Large deflection of circular auxetic membranes under uniform load10.1115/1.4033636 ↗
23. Liu · 2006
24. Design and fabrication of bone tissue engineering scaffolds via rapid prototyping and CAD10.1016/S1002-0721(07)60510-9 ↗
25. In-plane dynamic crushing of re-entrant auxetic cellular structure10.1016/j.matdes.2016.03.086 ↗
26. Models for the elastic deformation of honeycombs10.1016/S0263-8223(96)00054-2 ↗
27. Equivalent in-plane elastic properties of irregular honeycombs: an analytical approach10.1016/j.ijsolstr.2015.12.006 ↗
28. Effective in-plane elastic properties of auxetic honeycombs with spatial irregularity10.1016/j.mechmat.2016.01.009 ↗
29. Auxetic cellular materials-a review10.5545/sv-jme.2016.3656 ↗
30. Seeing auxetic materials from the mechanics point of view: a structural review on the negative Poisson’s ratio10.1016/j.commatsci.2012.02.012 ↗
31. Auxetic materials for bioprostheses10.1109/MSP.2008.926663 ↗
32. Numerical and experimental uniaxial loading on in-plane auxetic honeycombs10.1243/0309324001514152 ↗
33. Mechanical properties of auxetic tubular truss‐like structures10.1002/pssb.200777715 ↗
34. A review of ultrashort pulsed laser ablation of materials10.2351/1.521827 ↗
35. Design of honeycomb-like composites for electromagnetic and structural applications10.1049/ip-smt:20030851 ↗
36. Auxetic behaviour: appearance and engineering applications10.1002/pssb.200460388 ↗
37. The influence of large deformations on mechanical properties of sinusoidal ligament structures10.1088/0964-1726/25/5/054002 ↗
38. Properties and an anisotropic model of cancellous bone from the proximal tibial epiphysis10.1115/1.3138303 ↗
39. A study of negative Poisson’s ratios in auxetic honeycombs based on a large deflection model10.1016/j.euromechsol.2003.10.006 ↗
40. A constitutive model for metals over a large range of strain rates identification for mild-steel and aluminium sheets10.1016/S0921-5093(97)00024-5 ↗
41. The testing and behaviour modelling of sheet metals at strain rates from 10−4 to 104 s−110.1016/0921-5093(95)10017-2 ↗