Particle-chain evolution and constitutive model of magnetorheological polishing fluids based on hexagonal close-packed structure
Source abstract
Abstract
Abstract This paper proposes a novel constitutive model of magnetorheological polishing fluids (MRPFs) to predict field-dependent properties such as yield shear stress. First, the invasion of polishing particles to carbonyl iron particle (CIP) chains is analyzed in terms of the destructive effect on the distance of particles and the enhancement of chain structures. Subsequently, the hexagonal close-packed structure of magnetorheological fluids (MRFs) is utilized to formulate a constitutive model of MRPFs after examining the reconstructed distance and the proportional property of carbonyl iron particle chains affected by the polishing particles. According to the constitutive model, several factors that may affect the performance of MRPFs are considered, and experiments are carried out to prove these conjectures. A series of experiments explore the influencing mechanism of the radius and volume fraction of the polishing particles on the field-dependent properties of MRPFs such as the yield shear stress. The results, which are highly consistent with the simulation data based on constitutive model, show that the radius and volume fraction of polishing particles significantly affect the field-dependent properties of MRPFs. In addition, at a given magnetic field intensity the optimum radius and volume fraction of the polishing particles can be obtained to enhance the field-dependent yield shear stress of MRPFs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Cellular Mechanics and Interactions · Characterization and Applications of Magnetic Nanoparticles
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Mechanical properties of magnetorheological elastomers under shear deformation10.1016/j.compositesb.2011.08.026 ↗
2. Investigation into magnetorheological abrasive honing (MRAH)10.1016/j.ijmachtools.2009.02.009 ↗
3. An electro-chemo-mechanical polishing process using magnetorheological fluid10.1016/j.ijmachtools.2010.06.004 ↗
4. Synthesis and characterization of single-domain monocrystalline magnetite particles by oxidative aging of Fe(OH)210.1021/jp711990f ↗
5. Preliminary validation of Sm–Fe–N magnetic silicone rubber for a flexible magnetic actuator10.1088/0964-1726/23/6/067001 ↗
6. An experimental study on the effects of temperature and mag netic field strength on the magnetorheological fluid stability and MR effect10.1039/C5SM00625B ↗
7. Rheological properties of magnetorheological polishing fluid featuring plate-like iron particles10.1088/0964-1726/23/11/117003 ↗
8. Investigation of a novel finishing tool in magnetic field assisted finishing for titanium alloy Ti-6Al-4V10.1016/j.jmapro.2019.05.007 ↗
9. Preparation of composite magnetic particles and aqueous magnetorheological fluids10.1088/0964-1726/18/8/085009 ↗
10. On the yield stress in magnetorheological fluids: a direct comparison between 3D simulations and experiments10.1016/j.compositesb.2018.12.114 ↗
11. Rheological behavior of Magnetorheological polishing fluid for Si polishing10.1016/j.matpr.2017.01.170 ↗
12. Zirconia coated carbonyl iron particle-based magnetorheological fluid for polishing10.1117/12.826383 ↗
13. Characterization of magnetic abrasive particles based Magnetorheological polishing fluid10.1016/j.matpr.2017.01.082 ↗
14. Effect of magnetic dipolar interactions and size dispersity on the origin of steady state magneto-mechanical response in bidisperse Mn–Zn ferrite spherical particle based magnetorheological fluids10.1039/C9NJ00947G ↗
15. Magnetorheological elastomer films with tunable wetting and adhesion properties10.1021/acsami.5b06273 ↗
16. Experimental investigations into forces during magnetorheological fluid based finishing process10.1016/j.ijmachtools.2010.12.002 ↗
17. Nano–level finishing of single crystal silicon blank using magnetorheological finishing process10.1016/j.triboint.2011.10.008 ↗
18. Giant and reversible magneto-rheology of carrageenan/iron oxide magnetic gels10.1088/0964-1726/20/12/124003 ↗
19. Nano-finishing techniques: a review10.1177/0954406211426948 ↗
20. Foundation of mathematics model of magnetorheological finishing10.3321/j.issn:1002-1582.2000.02.003 ↗
21. MR fluids for finishing use10.3321/j.issn:1004-924X.2004.03.015 ↗
22. Rheological properties of silicon oil-based magnetic fluid with magnetic nanoparticles (MNPs) multi-walled carbon nanotube (MWNT)10.1088/1361-665X/ab19d4 ↗
23. Magnetorheological finishing of SiC aspheric mirrors10.1081/AMP-200060417 ↗
24. Rheological properties of magneto-rheological finishing fluid in various mixing states10.3969/j.issn.1001-3830.2014.05.003 ↗
25. Experimental investigation of the magnetorheological polishing process with roller10.1108/ILT-12-2017-0367 ↗
26. Rapid fabrication of 100 nm or thinner fully depleted silicon-on-insulator materials for ultralow energy consumption10.1021/acsanm.8b00602 ↗
27. Silica-coated carbonyl iron microsphere based magnetorheological fluid and its damping force characteristics10.1088/0964-1726/22/6/065022 ↗
28. Improved tunable range of the field-induced storage modulus by using flower-like particles as the active phase of magnetorheological elastomers10.1039/C8SM00359A ↗
29. Research of mechanics behavior of MRFs based on microstructure
30. Simulations of particle dynamics in magnetorheological fluids10.1006/jcph.1999.6335 ↗
31. Effects of particle distribution on mechanical properties of magneto-sensitive elastomers in a homogeneous magnetic field10.5488/CMP.15.33601 ↗
32. Nucleation theory of structure evolution in magnetorheological fluid10.1177/1045389X9600700523 ↗
33. Effect of attached particles on the mechanical properties of dipolar chains in magnetorheological fluids10.11835/j.issn.1000-582X.2010.07.015 ↗
34. Yield shear stress model of magnetorheological fluids based on exponential distribution10.1016/j.jmmm.2014.02.040 ↗
35. Study on land use change in rapid urbanization area based on logistic-CA-Markov model
36. Theoretical analysis of forces in magnetorheological fluid based finishing process10.1016/j.ijmecsci.2012.01.001 ↗
37. Modeling and simulation of surface roughness in magnetorheological abrasive flow finishing (MRAFF) process10.1016/j.wear.2006.01.04 ↗