journal article·2021-06-01

TMP origami jumping mechanism with nonlinear stiffness

Sahand Sadeghi, Samuel R Allison, Blake Bestill, Suyi Li

Smart Materials and Structures· Volume 30· Issue 6
Publisher page

Abstract

Abstract Via numerical simulation and experimental assessment, this study examines the use of origami folding to develop robotic jumping mechanisms with tailored nonlinear stiffness to improve dynamic performance. We propose a multifunctional structure where the load-carrying skeleton of the structure acts as the energy-storage medium at the same time. Specifically, we use Tachi–Miura polyhedron (TMP) bellow origami—which exhibits a nonlinear ‘strain-softening’ force-displacement curve—as a jumping robotic skeleton with embedded energy storage. TMP’s nonlinear stiffness allows it to store more energy than a linear spring and offers improved jumping height and airtime. Moreover, the nonlinearity can be tailored by directly changing the underlying TMP crease geometry. A critical challenge is to minimize the TMP’s hysteresis and energy loss during its compression stage right before jumping. So we used the plastically annealed lamina emergent origami (PALEO) concept to modify the TMP creases. PALEO increases the folding limit before plastic deformation occurs, thus improving the overall strain energy retention. Jumping experiments confirmed that a nonlinear TMP mechanism achieved roughly 9% improvement in air time and a 13% improvement in jumping height compared to a ‘control’ TMP sample with a relatively linear stiffness. This study’s results validate the advantages of using origami in robotic jumping mechanisms and demonstrate the benefits of utilizing nonlinear spring elements for improving jumping performance. Therefore, they could foster a new family of energetically efficient jumping mechanisms with optimized performance in the future.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Materials and Mechanics · Robotic Locomotion and Control · Biomimetic flight and propulsion mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Clemson University

Funding

Clemson University · National Science Foundation

References (57)

Show source-provided references
1. Literature review of mobile robots for manufacturing10.6028/NIST.IR.8022 ↗
2. Application of robotics in onshore oil and gas industry—a review part I10.1016/j.robot.2015.09.012 ↗
3. Robots in the nuclear industry: a review of technologies and applications10.1108/01439911111106327 ↗
4. Robotic manipulation of food products—a review10.1108/01439910310479612 ↗
5. A critical review on agricultural robots
6. Exploring the educational potential of robotics in schools: a systematic review10.1016/j.compedu.2011.10.006 ↗
7. Social robots for language learning: a review10.3102/0034654318821286 ↗
8. Review on design and control aspects of ankle rehabilitation robots10.3109/17483107.2013.866986 ↗
9. The role of healthcare robots for older people at home: a review10.1007/s12369-014-0242-2 ↗
10. The analytical review of the condition of heavy class military and dual-purpose unmanned ground vehicle10.1051/matecconf/20152604002 ↗
11. Path planning and obstacle avoidance for autonomous mobile robots: a review10.1007/11893004_70 ↗
12. A review of locomotion mechanisms of urban search and rescue robot10.1108/01439910710774403 ↗
13. Mine rescue robot system—a review10.1016/j.proeps.2015.06.045 ↗
14. A review of heavy-duty legged robots10.1007/s11431-013-5443-7 ↗
15. Robot locomotion—a review
16. Energy saving passive-dynamic gait for a one-legged hopping robot10.1017/S026357470500250X ↗
17. Biologically inspired jumping robots: a comprehensive review10.1016/j.robot.2019.103362 ↗
18. Dynamics and stability of directional jumps in the desert locust10.7717/peerj.2481 ↗
19. Three dimensional reconstruction of energy stores for jumping in planthoppers and froghoppers from confocal laser scanning microscopy10.7554/eLife.23824 ↗
20. Research on one bio-inspired jumping locomotion robot for search and rescue10.5772/58819 ↗
21. Design of a higher jumping rescue robot with the optimized pneumatic drive
22. MSU jumper: a single-motor-actuated miniature steerable jumping robot10.1109/TRO.2013.2249371 ↗
23. The effect of nonlinear springs in jumping mechanisms10.1115/DSCC2018-8969 ↗
24. The use of compliant joints and elastic energy storage in bio-inspired legged robots10.1016/j.mechmachtheory.2008.08.010 ↗
25. An indoor security system with a jumping robot as the surveillance terminal10.1109/TCE.2011.6131153 ↗
26. Design and testing of a controllable miniature jumping robot
27. Numerical analysis and design for a higher jumping rescue robot using a pneumatic cylinder10.1115/1.1825440 ↗
28. Hopping mobility concept for search and rescue robots10.1108/01439910810868561 ↗
29. An asymmetric robotic catapult based on the closed elastica for jumping robot
30. A compact jumping robot utilizing snap-through buckling with bend and twist10.1109/IROS.2010.5652928 ↗
31. The development of hopping capabilities for small robots10.1023/A:1022239904879 ↗
32. First jump of microgel; actuation speed enhancement by elastic instability10.1039/c0sm00092b ↗
33. Inflatable soft jumper inspired by shell snapping10.1126/scirobotics.abb1967 ↗
34. A method for building self-folding machines10.1126/science.1252610 ↗
35. The deformable wheel robot using magic-ball origami structure10.1115/DETC2013-13016 ↗
36. Origami robot: a self-folding paper robot with an electrothermal actuator created by printing10.1109/TMECH.2016.2593912 ↗
37. Mori: a modular origami robot10.1109/TMECH.2017.2697310 ↗
38. An origami-inspired, self-locking robotic arm that can be folded flat10.1126/scirobotics.aar2915 ↗
39. Design and analysis of an origami-based three-finger manipulator10.1017/S0263574717000340 ↗
40. The design and control of the multi-modal locomotion origami robot, Tribot
41. In-plane gait planning for earthworm-like metameric robots using genetic algorithm10.1088/1748-3190/ab97fb ↗
42. Peristaltic locomotion without digital controllers: exploiting multi-stability in origami to coordinate robotic motion10.1016/j.eml.2019.100552 ↗
43. Design, fabrication and control of origami robots10.1038/s41578-018-0009-8 ↗
44. Self-locking degree-4 vertex origami structures10.1098/rspa.2016.0682. ↗
45. Architected origami materials: how folding creates sophisticated mechanical properties10.1002/adma.201805282. ↗
46. Dynamics of a bistable Miura-origami structure10.1103/PhysRevE.95.052211 ↗
47. Origami-inspired cellular metamaterial with anisotropic multi-stability10.1002/adem.201800895 ↗
48. Fluidic origami cellular structure with asymmetric quasi-zero stiffness for low-frequency vibration isolation10.1088/1361-665X/ab143c ↗
49. Designing minimal and scalable insect-inspired multi-locomotion millirobots10.1038/s41586-019-1388-8 ↗
50. Dynamic folding of origami by exploiting asymmetric bi-stability10.1016/j.eml.2020.100958 ↗
51. Paleo: Plastically annealed lamina emergent origami10.1115/DETC2018-85983 ↗
52. One-DOF cylindrical deployable structures with rigid quadrilateral panels
53. Reentrant origami-based metamaterials with negative Poisson’s ratio and bistability10.1103/PhysRevLett.114.185502 ↗
54. Nonlinear mechanics of non-rigid origami: an efficient computational approach10.1098/rspa.2017.0348 ↗
55. Heat set creases in polyethylene terephthalate (PET) sheets to enable origami-based applications10.1088/1361-665X/ab49df ↗
56. Equivalent viscous damping equations for direct displacement based design10.1142/S1363246905002390 ↗
57. Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials10.1073/pnas.1509465112 ↗