Investigations on mechanical properties and stacking sequence of Kevlar/banana fiber reinforced nano graphene oxide hybrid composites
Source abstract
Abstract
Abstract This paper focuses on the fabrication of a new hybrid polymer composite laminate (HPCL) using biodegradable materials to avoid dumping of waste and has all the desired characteristics as compared to the conventional matrix composites used in various applications such as aerospace, railways cabin, structures, sports equipment, medical field, etc. Utilizing the hand lay-up method and compression molding machine, six layers of Kevlar fiber, banana fiber, and an epoxy-based matrix reinforced with graphene oxide (GO) were fabricated. By altering the stacking order of fibers in which the HPCL were stacked and embedding GO of various weight percentages (0 wt%, 0.25 wt%, 0.50 wt%, 0.75 wt%, and 1 wt%). As a result, it was seen that the best mechanical characteristics were found to be 42.23 MPa interlaminar shear strength, flexural strength, 300.39 MPa tensile strength, and 85.68 hardness were obtained at set C-2 i.e. 0.5 wt% of GO embedded in KKBBKK stacking order. The 0.25 wt% of GO of HPCL of set C-1 yielded the impact strength with the greatest value of 771.6 J m−1. Field emission scanning electron microscopy, energy dispersive x-ray mapping and x-ray diffraction tests were also conducted for validating the homogeneity of the material. All the mechanical properties were enhanced by embedding GO and incorporating stacking order in HPCL. Therefore, HPCL can be used where lightweight material with proper mechanical strength and biodegradability is an important condition for sustainable development.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Materials today: proceedings mechanical characterization of quasi-isotropic intra-ply woven carbon-Kevlar/epoxy hybrid composite10.1016/j.matpr.2021.10.431 ↗
2. Study the materials behavior for kevlar chopped mate with kenef fiber composites by hand layup technique10.1016/j.matpr.2022.06.545 ↗
3. Characterization and properties of natural fiber polymer composites: a comprehensive review10.1016/j.jclepro.2017.10.101 ↗
4. Critical review of natural fiber reinforced hybrid composites: processing, properties, applications and cost10.3390/polym13203514 ↗
5. Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry10.1016/j.jclepro.2013.10.050 ↗
6. On the impact of flax fibers as an internal layer on the properties of basalt-epoxy composites modified with silanized basalt powder10.1016/j.coco.2020.100360 ↗
7. Flax fibre and its composites—a review10.1016/j.compositesb.2013.08.014 ↗
8. Fabrication and testing of natural fibre composites: vakka, sisal, bamboo and banana10.1016/j.matdes.2009.06.023 ↗
9. The compressive and tensile behavior of a 0/90 C fiber woven composite at high strain rates10.1016/j.carbon.2013.04.073 ↗
10. Effects of environmental conditions on mechanical and physical properties of flax fibers10.1016/S1359-835X(01)00032-X ↗
11. Can silk become an effective reinforcing fibre? A property comparison with flax and glass reinforced composites10.1016/j.compscitech.2014.07.015 ↗
12. Critical factors on manufacturing processes of natural fibre composites10.1016/j.compositesb.2011.10.001 ↗
13. Characterization of natural fiber surfaces and natural fiber composites10.1016/j.compositesa.2008.07.007 ↗
14. Mechanical behavior of glass-fiber reinforced thermoplastic materials under high strain rates10.1016/j.polymertesting.2008.07.006 ↗
15. Lignocellulosic fiber reinforced composites: progress, performance, properties, applications, and future perspectives10.1002/pc.26413 ↗
16. Accelerated weathering and soil burial effects on colour, biodegradability and thermal properties of bamboo/kenaf/epoxy hybrid composites10.1016/j.polymertesting.2019.106054 ↗
17. Effect of sawdust filler with Kevlar/basalt fiber on the mechanical properties epoxy–based polymer composite materials10.1016/j.matpr.2022.09.208 ↗
18. Thermal properties of surface-modified nano-Al2O3/Kevlar fiber/epoxy composites10.1016/j.matchemphys.2021.125689 ↗
19. Influence of nanofillers on biodegradable composites: a comprehensive review10.1002/pc.26291 ↗
20. Influence of graphene oxide nano particle and aluminum powder on mechanical and thermal behavior of carbon fiber epoxy composite10.1016/j.matpr.2022.09.404 ↗
21. Nano-cementitious composites modified with graphene oxide—a review10.1016/j.tws.2022.110326 ↗
22. Investigation of effect of hygrothermal ageing on physical properties of graphene oxide/epoxy nano-composites10.1016/j.matpr.2022.04.363 ↗
23. Effective epoxy composite coating mechanical/fracture toughness properties improvement by incorporation of graphene oxide nano-platforms reduced by a green/biocompataible reductant10.1016/j.jiec.2019.03.038 ↗
24. Morphological, mechanical and thermal properties of PA6 nanocomposites Co-incorporated with nano-Al2O3 and graphene oxide fillers10.1016/j.polymer.2019.122119 ↗
25. Some mechanical properties and microstructure of cementitious nanocomposites containing nano-SiO2 and graphene oxide nanosheets10.1016/j.cscm.2022.e01482 ↗
26. A comprehensive review on the effect of synthetic filler materials on fiber-reinforced hybrid polymer composites10.1080/00405000.2021.1920151 ↗
27. Impact damage characterisation of composite laminates using a statistical approach10.1016/j.compscitech.2012.01.019 ↗
28. Fibre hybridisation in polymer composites: a review10.1016/j.compositesa.2014.08.027 ↗
29. Gowda · 202110.21203/rs.3.rs-273651/v1 ↗
30. Mechanical and moisture diffusion behaviour of hybrid Kevlar/Cocos nucifera sheath reinforced epoxy composites10.1016/j.jmrt.2018.07.023 ↗
31. Manufacturing techniques of composites for aerospace applications10.1016/B978-0-08-102131-6.00004-9 ↗
32. Advanced functional Kevlar composite with excellent mechanical properties for thermal management and intelligent safeguarding10.1016/j.cej.2021.131878 ↗
33. Kevlar fibers reinforced straw wastes-polyethylene composites: combining toughness, strength and self-extinguishing capabilities10.1016/j.compositesb.2021.109117 ↗
34. Analysis of interfacial friction properties of multi-phase STF/Kevlar composite fabrics in yarn pullout test10.1016/j.mtcomm.2022.105086 ↗
35. Fibre reinforced composites in aircraft construction10.1016/j.paerosci.2005.02.004 ↗
36. Effect of bio-fibers and inorganic fillers reinforcement on mechanical and thermal characteristics on carbon-kevlar-basalt-innegra fiber bio/ synthetic epoxy hybrid composites10.1016/j.jmrt.2023.02.162 ↗
37. Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing10.1016/j.addma.2017.06.004 ↗
38. Ballistic impact response of Kevlar® reinforced thermoplastic composite armors10.1016/j.ijimpeng.2015.10.014 ↗
39. Comparative performance assessment of pineapple and Kevlar fibers based friction composites10.1016/j.jmrt.2019.11.074 ↗
40. Spatially resolved nanomechanical properties of Kevlar® fibers10.1016/S0032-3861(99)00661-8 ↗
41. Adsorption of phenylalanine-rich sequence-defined oligomers onto Kevlar fibers for fiber-reinforced polyolefin composite materials10.1016/j.polymer.2021.123465 ↗
42. Microwave absorption and mechanical performance of α-MnO2 nanostructures grown on woven Kevlar fiber/reduced graphene oxide-polyaniline nano fiber array-reinforced polyester resin composites10.1016/j.compositesb.2017.12.003 ↗
43. Structural health monitoring (SHM) for composite structure undergoing tensile and thermal testing
44. Mechanical and impact characterisation of flax and basalt fibre vinylester composites and their hybrids10.1016/j.compositesb.2017.01.004 ↗
45. High strain rate out-of-plane compression properties of aramid fabric reinforced polyamide composite10.1016/j.polymertesting.2016.06.006 ↗
46. A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites10.1016/j.compscitech.2012.01.011 ↗
47. High strain rate compression testing of intra-ply and inter-ply hybrid thermoplastic composites reinforced with Kevlar/basalt fibers10.1016/j.polymertesting.2020.106407 ↗
48. Materials today: proceedings evaluation of tensile properties on glass/carbon/Kevlar fiber reinforced hybrid composites10.1016/j.matpr.2020.06.049 ↗
49. A review on fabrication techniques and tensile properties of glass, carbon, and Kevlar fiber reinforced rolymer composites10.1016/j.jmrt.2022.06.008 ↗
50. Materials today: proceedings study on mechanical properties of epoxy based kenaf/banana/glass fiber hybrid nano composites10.1016/j.matpr.2020.12.752 ↗