journal article·2019-07-01

Analysis and design of an annular-array MPT for the efficient generation of omnidirectional shear-horizontal waves in plates

Chung Il Park, Hong Min Seung, Jun Kyu Lee, Yoon Young Kim

Smart Materials and Structures· Volume 28· Issue 7
Publisher page

Abstract

Abstract Despite the fact that omnidirectional shear-horizontal (SH) waves have recently received much attention, there is no systematic design method with which to develop the corresponding transducers with enhanced output and power concentration levels at a target frequency. Here, we propose a method which can be used to design an optimal annular-array magnetostrictive patch transducer (MPT) that fulfills the above-mentioned objectives. The proposed transducer consists of optimally configured multiple magnetostrictive patches, consistently placed permanent magnets, and toroid coils. For the design, the transducer output signals are theoretically predicted using Green’s function of guided waves in a plate and the analysis results are then used to develop new high-power annular-array MPTs generating omnidirectional SH waves in a plate. The validity of the analysis and the effectiveness of the design method were confirmed with numerical simulations and pitch-catch wave experiments performed on an aluminum plate. In the experiments, the mode selectivity and omnidirectivity of the designed transducer were also checked. While the proposed method is mainly developed for MPTs, it should be equally useful for the design of similar annular-type piezoelectric and electromagnetic acoustic guided wave transducers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Acoustic Wave Resonator Technologies · Acoustic Wave Phenomena Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Omni-directional guided wave transducer arrays for the rapid inspection of large areas of plate structures10.1109/TUFFC.2003.1209557 ↗
2. Omnidirectional guided wave inspection of large metallic plate structures using an EMAT array10.1109/TUFFC.2005.1428048 ↗
3. Guided wave arrays for high resolution inspection10.1121/1.2804699 ↗
4. Ultrasonic guided wave imaging techniques in structural health monitoring10.1177/1045389X09356026 ↗
5. Piezoelectric-paint-based two-dimensional phased sensor arrays for structural health monitoring of thin panels10.1088/0964-1726/19/7/075017 ↗
6. In-situ optimized PWAS phased arrays for Lamb wave structural health monitoring10.2140/jomms.2007.2.459 ↗
7. Selective Lamb mode excitation by piezoelectric coaxial ring actuators10.1088/0964-1726/19/3/035018 ↗
8. Lamb wave mode decomposition using concentric ring and circular piezoelectric transducers10.1016/j.wavemoti.2011.01.001 ↗
9. Transducer arrays for omnidirectional guided wave mode control in plate like structures10.1088/0964-1726/22/1/015010 ↗
10. Mode controlled guided wave tomography using annular array transducers for SHM of water loaded plate like structures10.1088/0964-1726/22/12/125021 ↗
11. Tuned double-coil EMATs for omnidirectional symmetric mode lamb wave generation10.1016/j.ndteint.2016.06.001 ↗
12. Omnidirectional Lamb waves by axisymmetrically-configured magnetostrictive patch transducer10.1109/TUFFC.2013.2777 ↗
13. Review of magnetostrictive patch transducers and applications in ultrasonic nondestructive testing of waveguides10.1016/j.ultras.2015.05.015 ↗
14. A spacing compensation factor for the optimization of guided wave annular array transducers10.1121/1.4770238 ↗
15. Development of an omni-directional shear-horizontal wave magnetostrictive patch transducer for plates10.1016/j.ultras.2013.03.015 ↗
16. Generation of omni-directional shear-horizontal waves in a ferromagnetic plate by a magnetostrictive patch transducer10.1016/j.ndteint.2016.02.006 ↗
17. An omnidirectional shear-horizontal guided wave EMAT for a metallic plate10.1016/j.ultras.2016.03.011 ↗
18. Development of a low frequency omnidirectional piezoelectric shear horizontal wave transducer10.1088/0964-1726/25/4/045024 ↗
19. A uniform-sensitivity omnidirectional shear-horizontal (SH) wave transducer based on a thickness poled, thickness-shear (d15) piezoelectric ring10.1088/1361-665X/aa7244 ↗
20. A new omnidirectional shear horizontal wave transducer using face-shear (d24) piezoelectric ring array10.1016/j.ultras.2016.10.011 ↗
21. Omnidirectional shear horizontal wave based tomography for damage detection in a metallic plate with the compensation for the transfer functions of transducer10.1016/j.ultras.2018.03.009 ↗
22. Theory of the magnetomechanical effect10.1088/0022-3727/28/8/001 ↗
23. Giurgiutiu · 2008
24. Use of piezoelectric actuators as elements of intelligent structures10.2514/3.9792 ↗
25. Lamb wave tuning curve calibration for surface-bonded piezoelectric transducers10.1088/0964-1726/19/1/015007 ↗
26. Gouy phase for full-aperture spherical and cylindrical waves10.1364/OL.37.000924 ↗
27. COMSOL Multiphysics · 2008
28. Multipole expansion of Green’s function for guided waves in a transversely isotropic plate10.1007/s12206-015-0411-8 ↗
29. Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring10.1088/0964-1726/14/6/037 ↗
30. Graff · 1991
31. Extreme stiffness hyperbolic elastic metamaterial for total transmission subwavelength imaging10.1038/srep24026 ↗
32. Analysis of internal wave reflection within a magnetostrictive patch transducer for high-frequency guided torsional waves10.1016/j.ultras.2011.02.004 ↗
33. Magnetostrictive patch sensor system for battery-less real-time measurement of torsional vibrations of rotating shafts10.1016/j.jsv.2017.11.023 ↗