journal article·2022-01-01

Monitoring of stress variation of strands in prestressed concrete by second harmonic generation measurements based on piezoelectric sensors

Jun Chen, Xiaohan Wan, Quanquan Guo

Smart Materials and Structures· Volume 31· Issue 1
Publisher page

Abstract

Abstract The stress loss of prestressed concrete may cause the ultimate failure of structures and the monitoring of stress variation of prestressed structures is therefore important to ensure the service safety. This paper developed a nondestructive evaluation method of nonlinear ultrasonic second harmonic generation (SHG) based on piezoelectric (PZT) sensors and applied for the distinction of different stress level of post-tensioned steel strands in concrete. The nonlinear ultrasonic behavior of both free strand and embedded strand having different length is studied with the developed SHG technique and a defined nonlinear parameter is introduced in SHG experiments to correlate with the tension stress in the strand. It is found that the nonlinear parameter has a negative correlation with the increasing stress of strand in both free and embedded case, indicating the nonlinear ultrasonic behavior is getting weak corresponding to the increasing contact force among strand wires. In addition, the decreasing ratio of nonlinear parameter is very close to each other regardless of the length of steel strand, indicating the possibility of replacing the large-scale on-site testing with scaled down samples in laboratory. The experimental results of this research demonstrate that the SHG technique based on PZT sensors could be useful for the stress monitoring of prestressed reinforced concrete with consideration of the relatively high sensitivity of nonlinear parameter to the variation of contact force of strand wires.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A combined method for measuring cable forces: the cable-stayed Alamillo Bridge10.2749/101686694780601700 ↗
2. Monitoring load levels in multi-wire strands by nonlinear ultrasonic waves10.1177/1475921710395812 ↗
3. Fatigue damage assessment by nonlinear ultrasonic material characterization10.1016/S0041-624X(97)00040-1 ↗
4. Determination of yielding point by means a probabilistic method on acoustic emission signals for application to health monitoring of reinforced concrete structures10.1002/stc.2305 ↗
5. Numerical and experimental investigation of flexural performance on pre-stressed concrete structures using electromechanical admittance10.1016/j.ymssp.2019.03.046 ↗
6. Flexural damage diagnosis in reinforced concrete beams using a wireless admittance monitoring system-tests and finite element analysis10.3390/s21030679 ↗
7. Structural health monitoring of seismically vulnerable RC frames under lateral cyclic loading10.12989/eas.2020.19.1.029 ↗
8. Impedance-based structural health monitoring for temperature varying applications10.1299/jsmea.42.249 ↗
9. Automated impedance-based structural health monitoring incorporating effective frequency shift for compensating temperature effects10.1177/1045389X08088664 ↗
10. Identification of the location and size of cracks in beams by a piezoceramic actuator-sensor10.1002/stc.204 ↗
11. Applications of smart piezoelectric materials in a wireless admittance monitoring system (WiAMS) to structures-tests in RC elements10.1016/j.cscm.2016.03.003 ↗
12. Modeling of the attenuation of stress waves in concrete based on the Rayleigh damping model using time- reversal and PZT transducers10.1088/1361-665X/aa80c2 ↗
13. Finite element analysis of grouting compactness monitoring in a post-tensioning tendon duct using piezoceramic transducers10.3390/s17102239 ↗
14. Nonlinear elastic wave spectroscopy (NEWS) techniques to discern material damage, part I: nonlinear wave modulation spectroscopy (NWMS)10.1080/09349840009409646 ↗
15. Application of Wigner-Ville transform to evaluate tensile forces in seven-wire prestressing strands10.1061/(ASCE)0733-9399(2002)128:11(1206) ↗
16. Measurement of tensile forces in a seven-wire prestressing strand using stress waves10.1061/(ASCE)0733-9399(2001)127:6(599) ↗
17. Monitoring of structural prestress loss in RC beams by inner distributed Brillouin and fiber Bragg grating sensors on a single optical fiber10.1002/stc.1563 ↗
18. Ultrasonic guided waves for inspection of grouted tendons and bolts10.1061/(ASCE)0899-1561(2003)15:3(212) ↗
19. Predicting the uniaxial compressive strength of cemented paste backfill from ultrasonic pulse velocity test10.1080/10589759.2015.1111891 ↗
20. Development of prediction models for mechanical properties and durability of concrete using combined nondestructive tests10.1061/(ASCE)MT.1943-5533.0002569 ↗
21. Evaluation of mechanical properties of two-stage concrete and conventional concrete using nondestructive tests10.1061/(ASCE)MT.1943-5533.0003247 ↗
22. Impact-echo method for the deterioration evaluation of near-surface mounted CFRP strengthening under outdoor exposure conditions10.1617/s11527-016-0944-z ↗
23. Combined usage of acoustic emission technique and ultrasonic pulse velocity test to study crack classification in reinforced concrete structures10.1080/10589759.2019.1692013 ↗
24. Nonlinear ultrasonic investigation of concrete damaged under uniaxial compression step loading10.1061/(ASCE)MT.1943-5533.0000050 ↗
25. Detection of thermal fatigue in composites by second harmonic Lamb waves10.1088/0964-1726/21/8/085019 ↗
26. Evaluation of fatigue cracks using nonlinearities of acousto-ultrasonic waves acquired by an active sensor network10.1088/0964-1726/22/1/015018 ↗
27. Nondestructive testing of concrete using highly nonlinear solitary waves10.1080/10589759.2016.1254212 ↗
28. Evaluation of surface cracks of bending concrete using a fully non-contact air-coupled nonlinear ultrasonic technique10.1617/s11527-018-1230-z ↗
29. Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing10.1016/S0963-8695(00)00063-3 ↗
30. Nonlinear properties of Rayleigh and Stoneley waves in solids10.1063/1.342120 ↗
31. Elastic-wave modulation approach to crack detection: comparison of conventional modulation and higher-order interactions10.1016/j.ndteint.2010.09.002 ↗
32. A micromechanical model for nonlinear acoustic properties of interfaces between solids10.1063/1.2434939 ↗
33. Harmonic generation at an unbounded interface—I. Planar interface between semi-infinite elastic media10.1016/0020-7225(79)90008-9 ↗
34. On the acoustic nonlinearity of solid-solid contact with pressure-dependent interface stiffness10.1115/1.1767169 ↗
35. Experimental characterization of granite damage using nonlinear ultrasonic techniques10.1016/j.ndteint.2014.06.005 ↗
36. Standardization Administration of China · 2007 · p 1
37. European Committee for Standardization · 2011 · 1
38. Characterization of thermal damage in sandstone using the second harmonic generation of standing waves10.1016/j.ijrmms.2016.11.014 ↗
39. Actively modulated acoustic nondestructive evaluation of concrete10.1016/j.cemconres.2003.09.008 ↗
40. Wave attenuation measurement technique for nondestructive evaluation of concrete10.1080/10589759.2011.606319 ↗