journal article·2023-03-01

Magnetorheological fluids subjected to non-uniform magnetic fields: experimental characterization

Michal Kubík, Janusz Gołdasz, Ondřej Macháček, Zbyněk Strecker, Bogdan Sapiński

Smart Materials and Structures· Volume 32· Issue 3
Publisher page

Abstract

Abstract Magnetorheological (MR) fluids are suspensions of fine, low-coercivity, high-magnetizable particles in a continuous liquid phase. When subjected to magnetic field, the material exhibits a rapid change in the apparent viscosity of several orders of magnitude. This unique capability has been successfully exploited in automotive semi-active suspensions systems or systems for manufacturing high quality optics. In a majority of the existing systems, the rheology of MR fluids is controlled by an external uniform field oriented perpendicularly to the fluid flow direction. In general, it is an inherent feature of MR systems operating in flow, shear or squeeze modes, respectively. There is an experimental evidence that the behavior of MR fluids in the so-called pinch-mode (in which the fluid is subjected to non-uniform magnetic field distributions) clearly stands out against the remaining three operating modes. With the predecessors, the flow through the channel occurs once a pressure across it exceeds the field-dependent threshold pressure. For comparison, in pinch mode valves the magnetic flux energizes mostly the layers of the materials near the channel walls. The outcome is a change in the channel’s effective diameter achieved solely via material means without changing its geometry. To study the fluid’s unique behaviour in the pinch mode, the authors designed a prototype valve assembly and examined several fluid formulations of various particle concentration levels across a wide range of external (velocity, magnetic field density) stimuli in an organized effort to further comprehend the phenomenon. The obtained data indicate that the magnitude of the particular effect does not only depend on the magnitudes of the magnetic stimuli but also on the particle concentration; the smaller the concentration of particles the more pronounced the pinch mode like behavior is. In general, the authors believe that the study may provide guidelines as to the selection of fluid formulations for developing novel valveless actuators utilizing MR fluids operating in pinch mode.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration Control and Rheological Fluids · Seismic Performance and Analysis · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Effect of base oil lubrication properties on magnetorheological fluids10.1088/1361-665X/ac15a0 ↗
2. The influence of additives on the rheological and sedimentary properties of magnetorheological fluid10.3389/fmats.2020.631069 ↗
3. Effect of seven different additives on the properties of MR fluids10.1088/1742-6596/149/1/012086 ↗
4. Stabilization and tribological properties of magnetorheological (MR) fluids: a review10.1016/j.jmmm.2021.168295 ↗
5. Stribeck curve of magnetorheological fluid within pin-on-disc configuration: an experimental investigation10.3390/ma13204670 ↗
6. Influence of clay-based additive on sedimentation stability of magnetorheological fluid10.1088/1361-665X/abd345 ↗
7. Magnetorheological fluids based on core–shell carbonyl iron particles modified by various organosilanes: synthesis, stability and performance10.1039/D0SM01785J ↗
8. Magnetorheological fluids: a review10.1039/c0sm01221a ↗
9. Design and multi-objective optimization of magnetorheological damper considering vehicle riding comfort and operation stability10.1177/1045389X211048223 ↗
10. Novel approaches to the design of an ultra-fast magnetorheological valve for semi-active control10.3390/ma14102500 ↗
11. Gołdasz · 201510.1007/978-3-319-13233-4 ↗
12. Magnetic circuit design and optimisation of magnetorheological mount with tapered channel under the flow mode10.1177/1045389X20988091 ↗
13. MR-and ER-based semiactive engine mounts: a review10.1155/2013/831017 ↗
14. State of the art of structural control10.1061/(ASCE)0733-9445(2003)129:7(845) ↗
15. Mechanical performance of a novel magnetorheological fluid damper based on squeeze-valve bi-mode of MRF10.1088/1361-665X/ab7e34 ↗
16. A study of factors affecting torque transmission in permanent magnet-based magnetorheological fluid clutch10.1088/1361-665X/abfc68 ↗
17. Study of a magnetorheological brake under compression-shear mode10.1088/1361-665X/ab5162 ↗
18. Development and performance evaluation of an MR squeeze-mode damper10.1088/0964-1726/24/11/115007 ↗
19. Magnetorheological semi-active mount system for engines: prototyping and testing10.1177/0954407020925724 ↗
20. Controllable magnetorheological fluid valve, devices, and methods
21. An alternate operation mode for MR fluids–magnetic gradient pinch10.1088/1742-6596/149/1/012050 ↗
22. A quasi-static model for the pinch mode analysis of a magnetorheological fluid flow with an experimental validation10.1016/j.ymssp.2019.106308 ↗
23. Magnetostatic analysis of a pinch mode magnetorheological valve10.1515/ama-2017-0035 ↗
24. Fluid flow pinched by near-wall Bingham plastic zones: simulation study10.1109/REM.2018.8421800 ↗
25. A magnetorheological fluid shaft seal with low friction torque10.1088/1361-665X/ab0834 ↗
26. Effects of the non-uniform magnetic field on the shear stress and the microstructure of magnetorheological fluid10.1016/j.jmmm.2021.168066 ↗
27. Properties and applications of commercial magnetorheological fluids10.1177/1045389X9901000102 ↗
28. Instabilities of a pressure-driven flow of magnetorheological fluids10.1122/1.4810019 ↗
29. Kelvin force in a layer of magnetic fluid10.1016/S0304-8853(01)01368-3 ↗
30. Magnetic fields in electrochemistry: the Kelvin force. A mini-review10.1016/j.elecom.2014.02.005 ↗