journal article·2023-04-01Open access

Effect of polydispersity in concentrated magnetorheological fluids

Júlio Gabriel de Falco Manuel, Antonio José Faria Bombard, Eric R Weeks

Smart Materials and Structures· Volume 32· Issue 4

Abstract

Abstract Magnetorheological fluids (MRF) are smart materials of increasing interest due to their great versatility in mechanical and mechatronic systems. As main rheological features, MRFs must present low viscosity in the absence of magnetic field (0.1–1.0 Pa.s) and high yield stress (50–100 kPa) when magnetized, in order to optimize the magnetorheological effect. Such properties, in turn, are directly influenced by the composition, volume fraction, size, and size distribution (polydispersity) of the particles, the latter being an important piece in the improvement of these main properties. In this context, the present work aims to analyze, through experiments and simulations, the influence of polydispersity on the maximum packing fraction, on the yield stress under field (on-state) and on the plastic viscosity in the absence of field (off-state) of concentrated MRF (φ = 48.5 vol.%). Three blends of carbonyl iron powder (CIP) in polyalphaolefin oil were prepared. These blends have the same mode, but different polydispersity indexes (α), ranging from 0.46 to 1.44. Separate simulations show that the random close packing fraction increases from about 68% to 80% as the polydispersity indexes increase over this range. The on-state yield stress, in turn, is raised from 30 ± 0.5 kPa to 42 ± 2 kPa (B ≈ 0.57 T) and the off-state plastic viscosity, is reduced from 4.8 Pa.s to 0.5 Pa.s. Widening the size distributions, as is well known in the literature, increases packing efficiency and reduces the viscosity of concentrated dispersions, but beyond that, it proved to be a viable way to increase the magnetorheological effect of concentrated MRF. The Brouwers model, which considers the void fraction in suspensions of particles with lognormal distribution, was proposed as a possible hypothesis to explain the increase in yield stress under magnetic field.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration Control and Rheological Fluids · Seismic Performance and Analysis · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. The magnetic fluid clutch10.1109/T-AIEE.1948.5059821 ↗
2. Magnetorheological fluids: a review10.1039/c0sm01221a ↗
3. Design and application of magneto-rheological fluid10.1016/j.matdes.2006.10.009 ↗
4. Particle size polydispersity of the rheological properties in magnetorheological fluids10.1007/s11433-011-4355-4 ↗
5. Synthesis and magnetorheology of suspensions of submicron-sized cobalt particles with tunable particle size10.1088/0953-8984/22/32/324106 ↗
6. MR fluid, foam and elastomer devices10.1016/S0957-4158(99)00064-1 ↗
7. A novel surface polishing method and its fundamental performance in ultra-fine polishing of wafer10.1007/s00170-019-04473-9 ↗
8. A highly adaptive magnetorheological fluid robotic leg for efficient terrestrial locomotion10.1088/0964-1726/25/9/095019 ↗
9. The performance of a smart ball-and-socket actuator applied to upper limb rehabilitation10.1177/1045389X18780349 ↗
10. A novel hydraulic actuation system utilizing magnetorheological fluids for single-port laparoscopic surgery applications10.3390/ma13061380 ↗
11. Magnetorheology: materials and application10.1039/c0sm00014k ↗
12. Effect of magnetic dipolar interactions and size dispersity on the origin of steady state magnetomechanical response in bidisperse Mn–Zn ferrite spherical particle based magnetorheological fluids10.1039/C9NJ00947G ↗
13. Redispersibility and its relevance in the formulation of magnetorheological fluids
14. Magnetorheological fluids based on ionic liquids10.1002/adma.200700302 ↗
15. The field-dependent rheological properties of magnetorheological fluids featuring plate-like iron particles10.3389/fmats.2014.00021 ↗
16. Magnetorheology: a review10.1039/d0sm01082k ↗
17. Bidisperse and polydisperse suspension rheology at large solid fraction10.1122/1.5011353 ↗
18. Prediction of the viscosity of multimodal suspensions from unimodal viscosity data10.1122/1.549109 ↗
19. Optimum particle size distribution of an electrorheological fluid10.1063/1.357154 ↗
20. Influence of the particle size on the rheology of magnetorheological fluids10.1122/1.550614 ↗
21. Steady shear magnetorheology of inverse ferrofluids10.1122/1.3523481 ↗
22. Influence of the size distribution of particles on the viscous property of an electrorheological fluid10.1088/0256-307X/14/2/021 ↗
23. Computer simulation of electrorheological fluids in the binary system of particle size10.1142/S0217979299001843 ↗
24. The influence of particle size on the magnetorheological properties of an inverse ferrofluid10.1063/1.482011 ↗
25. The effect of mixing particles of different size on the electrorheological response under steady shear flow10.1007/s003970200005 ↗
26. Influence of particle size on the rheological properties of magnetorheological suspensions10.1142/S0217979205030384 ↗
27. Viscoelasticity of mono- and polydisperse inverse ferrofluids10.1063/1.2337576 ↗
28. Electronic structure and magnetic properties of GdM2 compounds10.1016/S0304-8853(02)01100-9 ↗
29. Structure and magnetic properties of polydisperse ferrofluids: a molecular dynamics study10.1103/PhysRevE.68.041401 ↗
30. The physical mechanism to reduce viscosity of liquid suspensions10.1142/S0217979207045645 ↗
31. Using oscillatory shear to probe the effects of bidispersity in inverse ferrofluids
32. Influence of the particles size and size distribution on the magnetorheological fluids Properties10.1109/TMAG.2009.2024633 ↗
33. Brownian dynamics simulations in magnetorheology and comparison with experiments10.1039/c3sm00137g ↗
34. Effect of particle size distribution on chain structures in magnetorheological fluids10.1109/TMAG.2013.2245409 ↗
35. Effect of particle size on shear stress of magnetorheological fluids10.1080/23080477.2015.11665638 ↗
36. Simulations of polydisperse magnetorheological fluids: a structural and kinetic investigation10.1122/1.4906544 ↗
37. Über die kinetik der kettenpolymerisationen. V10.1515/zpch-1939-4304 ↗
38. Start-up rheometry of highly polydisperse magnetorheological fluids: experiments and simulations10.1007/s00397-016-0914-y ↗
39. Magnetorheological fluids
40. Allen · 1997
41. A study of particle size distributions10.1016/0032-5910(90)80073-8 ↗
42. Log-normal distributions across the sciences: keys and clues10.1641/0006-3568(2001)051[0341:LNDATS]2.0.CO;2 ↗
43. Modeling particle size distribution in heterogeneous polymerization systems using multimodal lognormal function10.1590/0104-6632.20160333s20150114 ↗
44. Particle size distribution of automobile paint sprays10.1080/1047322X.1992.10388052 ↗
45. Solid-state analysis
46. Influence of particle size distribution on random close packing of spheres10.1103/PhysRevE.90.022204 ↗
47. Influence of the sand particle shape on particle size distribution measured by laser diffraction method10.2478/intag-2014-0008 ↗
48. Use of milling and wet sieving to produce narrow particle size distributions of lactose monohydrate in the sub-sieve range10.1016/j.powtec.2007.01.020 ↗
49. Tests for normality and measures of skewness and kurtosis: their place in research reporting10.1177/0013164490504001 ↗
50. Skewness and kurtosis in real data samples10.1027/1614-2241/a000057 ↗
51. On the meaning and use of kurtosis10.1037/1082-989X.2.3.292 ↗
52. Peacock · 2011
53. Crow · 1988
54. Continuous probability distributions
55. MR fluid for increasing the output of a magnetorheological fluid damper
56. Off-state viscosity and yield stress optimization of magneto-rheological fluids: a mixture design of experiments approach10.1088/1742-6596/149/1/012037 ↗
57. Magnetorheological liquid
58. Effect of temperature on sedimentation stability and flow characteristics of magnetorheological fluids with damper as the performance analyser10.1016/j.jmmm.2022.169342 ↗
59. Synthesis of calcium ferrite nanocrystal clusters for magnetorheological fluid with enhanced sedimentation stability10.1016/j.powtec.2017.08.065 ↗
60. Synthesis and magnetorheological characteristics of ribbon-like, polypyrrole-coated carbonyl iron suspensions under oscillatory shear10.1002/app.38473 ↗
61. Preparation of composite magnetic particles and aqueous magnetorheological fluids10.1088/0964-1726/18/8/085009 ↗
62. Sedimentation of metallic particles in oils and emulsions10.1016/0927-7757(93)80418-E ↗
63. Close packing density of polydisperse hard spheres10.1063/1.3276799 ↗
64. Random close packing fractions of lognormal distributions of hard spheres10.1016/j.powtec.2013.04.009 ↗
65. Random close packing revisited: ways to pack frictionless disks10.1103/PhysRevE.71.061306 ↗
66. Random close packing of disks and spheres in confined geometries10.1103/PhysRevE.80.051305 ↗
67. Power laws, Pareto distributions and Zipf’s law10.1080/00107510500052444 ↗
68. Powder characterization and testing
69. MR fluid for increasing the output of a magnetorheological fluid device
70. Macosko · 1994
71. A mechanism for non‐Newtonian flow in suspensions of rigid spheres10.1122/1.548848 ↗
72. Mezger · 2014
73. Introduction to the rheology of complex fluids
74. Settling stability of coal slurries prepared by wet grinding in the Szego mill10.1002/cjce.5450630409 ↗
75. Preparation and characterization of magnetorheological fluids by dispersion of carbonyl iron microparticles in PAO/1-octanol10.1088/0964-1726/25/1/015023 ↗
76. Formulation of stable coal-methanol suspensions using coal liquids10.1080/08843758608915801 ↗
77. Heteroaggregation of CeO2 and TiO2 engineered nanoparticles in the aqueous phase: application of turbiscan stability index and fluorescence excitation-emission matrix (EEM) spectra10.1016/j.colsurfa.2017.08.014 ↗
78. Turbiscan MA 2000: multiple light scattering measurement for concentrated emulsion and suspension instability analysis10.1016/S0039-9140(99)00129-0 ↗
79. Enhanced magnetorheological response of carbonyl iron suspension with added ZnFe2O4 particles10.1109/TMAG.2021.3086863 ↗
80. Core–shell structured magnetite-poly(diphenylamine) microspheres and their tunable dual response under magnetic and electric fields10.1021/acs.langmuir.0c02951 ↗
81. A systematical study of the overall influence of carbon allotrope additives on performance, stability and redispersibility of magnetorheological fluids10.1016/j.colsurfa.2018.01.046 ↗
82. Turbiscan Lab User Guide
83. Packing fraction of particles with lognormal size distribution10.1103/PhysRevE.89.052211 ↗