journal article·2018-03-01

Torsion sensing based on patterned piezoelectric beams

Youngsu Cha, Hangil You

Smart Materials and Structures· Volume 27· Issue 3
Publisher page

Abstract

Abstract In this study, we investigated the sensing characteristics of piezoelectric beams under torsional loads. We used partially patterned piezoelectric beams to sense torsion. In particular, the piezoelectric patches are located symmetrically with respect to the line of the shear center of the beam. The patterned piezoelectric beam is modeled as a slender beam, and its electrical responses are obtained by piezoelectric electromechanical equations. To validate the modeling framework, experiments are performed using a setup that forces pure torsional deformation. Three different geometric configurations of the patterned piezoelectric layer are used for the experiments. The frequency and amplitude of the forced torsional load are systematically varied in order to study the behavior of the piezoelectric sensor. Experimental results demonstrate that two voltage outputs of the piezoelectric beam are approximately out of phase with identical amplitude. Moreover, the length of the piezoelectric layers has a significant influence on the sensing properties. Our theoretical predictions using the model support the experimental findings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Gandhi · 1992
2. A review of piezoelectric polymers as functional materials for electromechanical transducers10.1088/0964-1726/23/3/033001 ↗
3. Comparison of electroactive polymers for energy scavenging applications10.1088/0964-1726/19/8/085012 ↗
4. Jaffe · 2012 · Vol 3
5. Erturk · 201110.1002/9781119991151 ↗
7. Piezoelectricity and pyroelectricity in polyvinylidene fluoride model10.1063/1.324445 ↗
8. An investigation into the performance of macro-fiber composites for sensing and structural vibration applications10.1016/S0888-3270(03)00081-5 ↗
9. Energy harvesting from underwater base excitation of a piezoelectric composite beam10.1088/0964-1726/22/11/115026 ↗
10. Underwater thrust and power generation using flexible piezoelectric composites: an experimental investigation toward self-powered swimmer-sensor platforms10.1088/0964-1726/20/12/125013 ↗
11. Bio-inspired aquatic robotics by untethered piezohydroelastic actuation10.1088/1748-3182/8/1/016006 ↗
12. Energy harvesting from a piezoelectric biomimetic fish tail10.1016/j.renene.2015.07.077 ↗
13. Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles-a review10.1088/0964-1726/7/6/001 ↗
14. Ionic polymer-metal composites: I. Fundamentals10.1088/0964-1726/10/4/327 ↗
15. Free-locomotion of underwater vehicles actuated by ionic polymer metal composites10.1109/TMECH.2009.2030887 ↗
16. Modeling of biomimetic robotic fish propelled by an ionic polymer-metal composite caudal fin10.1109/TMECH.2009.2027812 ↗
17. Model-based estimation of flow characteristics using an ionic polymer-metal composite beam10.1109/TMECH.2012.2194300 ↗
18. Recent advances in ionic polymer-metal composite actuators and their modeling and applications10.1016/j.progpolymsci.2013.04.003 ↗
19. Mechanics and electrochemistry of ionic polymer metal composites10.1016/j.jmps.2014.07.006 ↗
20. Shahinpoor · 201510.1039/9781782622581 ↗
21. Piezoelectric energy harvesting devices for low frequency vibration applications
22. An energy harvesting comparison of piezoelectric and ionically conductive polymers10.1177/1045389X08099604 ↗
23. IPMC as a mechanoelectric energy harvester: tailored properties10.1088/0964-1726/22/1/015017 ↗
24. Numerical and experimental investigation of active vibration control in a cylindrical shell partially covered by a laminated pvdf actuator10.1088/0964-1726/17/3/035024 ↗
25. Pvdf actuator for high-frequency fatigue test of thin-film metals10.1002/tee.21840 ↗
26. Development of a pvdf piezopolymer sensor for unconstrained in-sleep cardiorespiratory monitoring10.1177/1045389X03014003006 ↗
27. Measurement and evaluation of tactile sensations using a pvdf sensor10.1177/1045389X06072802 ↗
28. Integrated sensing for ionic polymer-metal composite actuators using pvdf thin films10.1088/0964-1726/16/2/S10 ↗
29. A pvdf-based deformation and motion sensor: Modeling and experiments10.1109/JSEN.2008.917483 ↗
30. A flexible piezoelectric force sensor based on pvdf fabrics10.1088/0964-1726/20/4/045009 ↗
31. Low-frequency energy harvesting using a laminated pvdf cantilever with a magnetic mass
32. Energy harvesting from highly unsteady fluid flows using piezoelectric materials10.1177/1045389X10366317 ↗
33. Segmentation of a vibro-shock cantilever-type piezoelectric energy harvester operating in higher transverse vibration modes10.3390/s16010011 ↗
34. Flexible piezoelectric energy harvesting from mouse click motions10.3390/s16071045 ↗
35. Laminated piezopolymer plates for torsion and bending sensors and actuators10.1121/1.397792 ↗
36. Dynamics of omnidirectional ipmc sensor: Experimental characterization and physical modeling10.1109/TMECH.2015.2468080 ↗
37. A dynamic physics-based model for tubular ipmc sensors under torsional excitation10.1117/12.2219577 ↗
38. An energy harvester using piezoelectric cantilever beams undergoing coupled bending-torsion vibrations10.1088/0964-1726/20/11/115007 ↗
39. Design of piezoelectric bimorph for collecting both bending and torsional energies
40. Energy harvesting from underwater torsional vibrations of a patterned ionic polymer metal composte10.1088/0964-1726/22/5/055027 ↗
41. Fabrication and actuation of ionic polymer metal composites patterned by combining electroplating with electroless plating10.1016/j.compositesa.2007.07.013 ↗
42. A twistable ionic polymer-metal composite artificial muscle for marine applications10.4031/MTSJ.45.4.9 ↗
43. Monolithic ipmc fins for propulsion and maneuvering in bioinspired underwater robotics10.1109/JOE.2013.2259318 ↗
44. Soft wearable motion sensing suit for lower limb biomechanics measurements
45. Patient posture monitoring system based on flexible sensors10.3390/s17030584 ↗
46. Torsion and transverse bending of cantilever plates