journal article·2020-12-01

An efficient flexible strain sensor based on anhydride-grafted styrene-butadiene-styrene triblock copolymer/carbon black: enhanced electrical conductivity, sensitivity and stability through solvent swelling

Lanlan Wu, Dahu Yao, Xiping Gao, Zhiqiang Yu, Xiao Wang, Yuxin He, Yan Zhu, Chang Lu, Keyang Li

Smart Materials and Structures· Volume 29· Issue 12
Publisher page

Abstract

Abstract High-performance flexible strain sensors based on maleic anhydride-grafted styrene-butadiene-styrene triblock copolymer/carbon black (SBS-g-MAH/CB) composites were prepared by simple solvent swelling of SBS-g-MAH/CB composites obtained by melt blending. After swelling in N,N-dimethylformamide (DMF) or xylene, the aggregation of CB in the composites was reduced noticeably. Consequently, the conductivity of the composites improved by a great extent, and the percolation thresholds of the composites decreased. At 12% CB loading, the conductivity increased approximately 400 times or 6000 times upon swelling in DMF or xylene, respectively. DMF swelling did not change the morphology of SBS-g-MAH, and a three-dimensional conductive network was formed in the composites. The SBS-g-MAH morphology changed considerably, and a two-dimensional conductive network was formed after swelling in xylene. DMF swelling enhanced the piezoresistive performance of the composites. The gauge factor increased from 4 to 71. Moreover, the drawbacks of composites prepared by melt blending, including electromechanical inconsistency and poor stability, were overcome. Due to the high conductivity and the change in SBS-g-MAH morphology, an approximately two-fold increase in electromagnetic interference shielding efficiency was observed after swelling the composites in xylene. The mechanism of the strain sensor was discussed. The strain sensing behaviour of SBS-g-MAH/CB composites can be explained by an analytical model based on the tunneling theory.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Piezoresistivity, strain, and damage self-sensing of polymer composites filled with carbon nanostructures10.1002/adem.201701159 ↗
2. Electrically conductive polymer composites for smart flexible strain sensors: a critical review10.1039/c8tc04079f ↗
3. Flexible tactile sensors for dynamic triaxial force measurement based on piezoelectric elastomer10.1088/1361-665X/ab8748 ↗
4. Sensitive, high-strain, high-rate bodily motion sensors based on graphene rubber composites10.1021/nn503454h ↗
5. The resistivity–strain behavior of conductive polymer composites: stability and sensitivity10.1039/C4TA03645J ↗
6. Highly sensitive flexible strain sensor based on threadlike spandex substrate coating with conductive nanocomposites for wearable electronic skin10.1088/1361-665X/aaf3ce ↗
7. Flexible conductive poly(styrene-butadiene-styrene)/carbon nanotubes nanocomposites: self-assembly and broadband electrical behavior10.1002/app.46650 ↗
8. A bottom-up approach to design wearable and stretchable smart fibers with organic vapor sensing behaviors and energy storage properties10.1039/C8TA03262A ↗
9. An efficient highly flexible strain sensor: enhanced electrical conductivity, piezoresistivity and flexibility of a strongly piezoresistive composite based on conductive carbon black and an ionic liquid10.1016/j.compositesa.2018.08.004 ↗
10. Piezoresistive response of extruded polyaniline/(styrene-butadiene-styrene) polymer blends for force and deformation sensors10.1016/j.matdes.2017.12.011 ↗
11. Highly stretchable and sensitive strain sensor with porous segregated conductive network10.1021/acsami.9b12504 ↗
12. Flexible conductive Ag nanowire/cellulose nanofibril hybrid nanopaper for strain and temperature sensing applications10.1016/j.scib.2020.02.020 ↗
13. Highly sensitive and stretchable polyurethane fiber strain sensors with embedded silver nanowires10.1021/acsami.9b08611 ↗
14. One-step preparation of a highly stretchable, conductive, and transparent poly(vinyl alcohol)-phytic acid hydrogel for casual writing circuits10.1021/acsami.9b12626 ↗
15. Hydrogel bioelectronics10.1039/C8CS00595H ↗
16. Ionogel-based, highly stretchable, transparent, durable triboelectric nanogenerators for energy harvesting and motion sensing over a wide temperature range10.1016/j.nanoen.2019.06.043 ↗
17. A flexible multimodal sensor that detects strain, humidity, temperature, and pressure with carbon black and reduced graphene oxide hierarchical composite on paper10.1021/acsami.9b13349 ↗
18. Shape-adaptive, self-healable triboelectric nanogenerator with enhanced performances by soft solid-solid contact electrification10.1021/acsnano.9b02690 ↗
19. Stick‐on large‐strain sensors for soft robots10.1002/admi.201900985 ↗
20. Large area and ultra-thin compliant strain sensors for prosthetic devices10.1016/j.sna.2017.08.051 ↗
21. Ag nanowire reinforced highly stretchable conductive fibers for wearable electronics10.1002/adfm.201500628 ↗
22. Conductive fiber-based ultrasensitive textile pressure sensor for wearable electronics10.1002/adma.201500009 ↗
23. 1-D polymer ternary composites: understanding materials interaction, percolation behaviors and mechanism toward ultra-high stretchable and super-sensitive strain sensors10.1007/s40843-018-9402-1 ↗
24. Mass-produced SEBS/graphite nanoplatelet composites with a segregated structure for highly stretchable and recyclable strain sensors10.1039/C9TC02321F ↗
25. Processing of nanocomposites using supercritical fluid assisted extrusion for stress/strain sensing applications10.1016/j.compositesb.2019.01.098 ↗
26. Crack-enhanced mechanosensitivity of cost-effective piezoresistive flexible strain sensors suitable for motion detection10.1088/1361-665X/aadc89 ↗
27. Highly sensitive and stretchable piezoresistive strain sensor based on conductive poly(styrene-butadiene-styrene)/few layer graphene composite fiber10.1016/j.compositesa.2017.11.027 ↗
28. On the use of surfactants for improving nanofiller dispersion and piezoresistive response in stretchable polymer composites10.1039/C8TC03829E ↗
29. Enhanced electrical conductivity and piezoresistive sensing in multi-wall carbon nanotubes/polydimethylsiloxane nanocomposites via the construction of a self-segregated structure10.1039/C7NR02322G ↗
30. Super-hydrophobic, durable and cost-effective carbon black/rubber composites for high performance strain sensors10.1016/j.compositesb.2019.107358 ↗
31. Stretchable polymer composite with a 3D segregated structure of PEDOT:PSS for multifunctional touchless sensing10.1021/acsami.9b16353 ↗
32. Ultrastretchable conductive polymer complex as a strain sensor with a repeatable autonomous self-healing ability10.1021/acsami.9b05464 ↗
33. Pressure sensibility of conductive rubber based on NBR- and polypyrrole-designed materials10.3389/fmats.2019.00189 ↗
34. Experimental and numerical studies on the sensitivity of carbon fibre/silicone rubber composite sensors10.1088/0964-1726/21/3/035011 ↗
35. Negative liquid sensing effect and tunable piezoresistive sensitivity in polydimethylsiloxane/carbon nanotubes/water-absorbing-expansion particles nanocomposites10.1016/j.compositesa.2019.105608 ↗
36. Electrical percolation of silicone rubber filled by carbon black and carbon nanotubes researched by the Monte Carlo simulation10.1002/app.48222 ↗
37. Multifunctional flexible carbon black/polydimethylsiloxane piezoresistive sensor with ultrahigh linear range, excellent durability and oil/water separation capability10.1016/j.cej.2019.04.142 ↗
38. Electrical resistivity and mechanical properties of cementitious composite incorporating conductive rubber fibres10.1088/1361-665X/ab282a ↗
39. Prevulcanized natural rubber and carbon black: high-deformation piezoresistive composites10.1016/j.matlet.2019.07.129 ↗
40. Enhancement of percolation threshold by controlling the structure of composites based on nanostructured carbon filler10.1007/s11664-019-07287-3 ↗
41. Sono-assisted surface energy driven assembly of 2D materials on flexible polymer substrates: a green assembly method using water10.1021/acsami.9b10469 ↗
42. Fracture energies of styrene-butadiene-styrene block copolymers (I). Effects of rate, temperature, and casting solvent10.1002/(SICI)1099-0488(19970930)35:13<2003::AID-POLB2>3.0.CO;2-X ↗
43. Influences of compatibilization and compounding process on electrical conduction and thermal stabilities of carbon black-filled immiscible polypropylene/polystyrene blends10.1002/pi.4289 ↗
44. Percolation concept: polymer-filler gel formation, electrical conductivity and dynamic electrical properties of carbon-black-filled rubbers10.1295/polymj.28.121 ↗
45. Carbon based conductive polymer composites10.1007/s10853-007-1688-5 ↗
46. Fluctuation-induced tunneling conduction in carbon-polyvinylchloride composites10.1103/PhysRevLett.40.1197 ↗
47. Universal resistivity–strain dependence of carbon nanotube/polymer composites10.1103/PhysRevB.76.195433 ↗
48. Electromagnetic interference shielding polymers and nanocomposites - a review10.1080/15583724.2018.1546737 ↗
49. Tailored distribution of nanoparticles in bi-phasic polymeric blends as emerging materials for suppressing electromagnetic radiation: challenges and prospects10.1039/C8TC00002F ↗
50. Electromagnetic interference (EMI) shielding effectiveness of PP/PS polymer blends containing high structure carbon black10.1002/mame.200800060 ↗
51. Comparative study of EMI shielding effectiveness for carbon fiber pultruded polypropylene/poly(lactic acid)/multiwall CNT composites prepared by injection molding versus screw extrusion10.1002/app.45222 ↗
52. Morphology, mechanical properties and electromagnetic shielding effectiveness of poly(styrene-b-ethylene-ran-butylene-b-styrene)/carbon nanotube nanocomposites: effects of maleic anhydride, carbon nanotube loading and processing method10.1002/pi.5630 ↗
53. Influence of carbon nanotube spatial distribution on electromagnetic properties of nanotube-polymer composites10.1002/pssb.201700257 ↗