journal article·2022-02-01Open access

A hybrid MRE isolation system integrated with ball-screw inerter for vibration control

Shida Jin, Shuaishuai Sun, Jian Yang, Lei Deng, Haiping Du, Weihua Li

Smart Materials and Structures· Volume 31· Issue 2

Abstract

Abstract Magnetorheological elastomer (MRE), as a field-dependent smart material, has been widely applied on base isolation for vibration reduction. However, the MRE isolation system often experiences large drift during a strong earthquake, which may cause mechanical failure. Additionally, its performance among the low-frequency range is still limited. To tackle these problems, this paper proposes a hybrid vibration isolation system which is composed of four stiffness softening MRE isolators and a passive ball-screw inerter. A simulation was developed to prove the effectiveness of the hybrid isolation system before the earthquake tests. A scaled three-storey building was developed based on the scaling laws as the isolated objective in earthquake experiments. Besides, a linear quadratic regulation controller was utilised to control the mechanical properties of the hybrid MRE isolation system. Finally, the evaluation experiments of the building under a scaled Kobe earthquake excitation were conducted. The experimental results show that the simulation and the experimental results were in agreement, validating that the hybrid isolation system could provide a better vibration mitigation performance, in the meanwhile, reduce the displacement amplitude of the isolation system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration Control and Rheological Fluids · Seismic Performance and Analysis · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Integration of an omnidirectional self-powering component to an MRE isolator towards a smart passive isolation system10.1016/j.ymssp.2020.106853 ↗
2. Development of a novel multi-layer MRE isolator for suppression of building vibrations under seismic events10.1016/j.ymssp.2015.08.022 ↗
3. Development and characterization of a magnetorheological elastomer based adaptive seismic isolator10.1088/0964-1726/22/3/035005 ↗
4. Parameters affecting dynamics of three-dimensional seismic isolation10.1080/13632469.2018.1537902 ↗
5. ‘Smart’ base isolation strategies employing magnetorheological dampers10.1061/(ASCE)0733-9399(2002)128:5(540) ↗
6. A large-scale adaptive magnetorheological elastomer-based bridge bearing10.1117/12.2257775 ↗
7. Design and co-optimization of a laminated isolation bearing based on magnetorheological elastomer10.1016/j.ymssp.2021.107843 ↗
8. Improving transient magnetorheological response of magnetorheological elastomer by incorporating CIP@ FeNi particles10.1088/1361-665X/abcf1c ↗
9. A state-of-the-art review on magnetorheological elastomer devices10.1088/0964-1726/23/12/123001 ↗
10. Viscoelastic properties of MR elastomers under harmonic loading10.1007/s00397-010-0446-9 ↗
11. MRE properties under shear and squeeze modes and applications10.1177/1045389X09355666 ↗
12. A hybrid skyhook active force control for impact mitigation using magneto-rheological elastomer isolator10.1088/1361-665X/abd911 ↗
13. Magnetic particle filled elastomeric hybrid composites and their magnetorheological response10.3390/ma11061040 ↗
14. Magnetic field intensity effect on plane electric capacitor characteristics and viscoelasticity of magnetorheological elastomer10.1007/s00396-012-2627-9 ↗
15. A highly adjustable magnetorheological elastomer base isolator for applications of real-time adaptive control10.1088/0964-1726/22/9/095020 ↗
16. Tunable low range Gr induced magnetorheological elastomer with magnetically conductive feedback10.1088/1361-665X/ab7a3e ↗
17. State observation-based control algorithm for dynamic vibration absorbing systems featuring magnetorheological elastomers: principle and analysis10.1177/1045389X17692047 ↗
18. Application of magnetorheological elastomer to vibration absorber10.1016/j.cnsns.2007.03.024 ↗
19. Development of an adaptive tuned vibration absorber with magnetorheological elastomer10.1088/0964-1726/15/5/N02 ↗
20. Experimental study of semi-active magnetorheological elastomer base isolation system using optimal neuro fuzzy logic control10.1016/j.ymssp.2018.10.001 ↗
21. A novel magnetorheological elastomer isolator with negative changing stiffness for vibration reduction10.1088/0964-1726/23/10/105023 ↗
22. Simplified analytical solution for the optimal design of tuned mass damper inerter for base isolated structures10.1016/j.ymssp.2019.106337 ↗
23. Building suspensions with inerters10.1243/09544062JMES1909 ↗
24. Inerter-based structural vibration control: a state-of-the-art review10.1016/j.engstruct.2021.112655 ↗
25. An enhanced base isolation system equipped with optimal tuned mass damper inerter (TMDI)10.1002/eqe.3011 ↗
26. Synthesis of mechanical networks: the inerter10.1109/TAC.2002.803532 ↗
27. Integrated shock absorber with both tunable inertance and damping10.3389/fmats.2020.00204 ↗
28. A semi-active variable equivalent stiffness and inertance device implemented by an electrical network10.1016/j.ymssp.2021.107676 ↗
29. Designing and testing a hydraulic inerter10.1243/09544062JMES2199 ↗
30. Seismic responses of adjacent bridge structures coupled by tuned inerter damper10.1016/j.engstruct.2021.112654 ↗
31. The inerter: a retrospective10.1146/annurev-control-053018-023917 ↗
32. Force-controlling mechanical device
33. Control of vehicle suspension using an adaptive inerter10.1177/0954407015574808 ↗
34. Vehicle suspensions with a mechatronic network strut10.1080/00423111003797143 ↗
35. Dynamic testing of a full-scale hydraulic inerter-damper for the seismic protection of civil structures10.7414/7aese.T1.55 ↗
36. Performance benefits in passive vehicle suspensions employing inerters10.1080/00423110412331289871 ↗
37. A rotary variable admittance device and its application in vehicle seat suspension vibration control10.1016/j.jfranklin.2019.04.015 ↗
38. Soil-dependent optimum design of a new passive vibration control system combining seismic base isolation with tuned inerter damper10.1016/j.soildyn.2017.11.023 ↗