journal article·2019-07-01

Geometry-independent attenuation and randomness of ultrasound wave propagation in concrete measured by embedded PZT transducers

Shuang Hou, Zhihao Kong, Jingmin He, Bo Wu

Smart Materials and Structures· Volume 28· Issue 7
Publisher page

Abstract

Abstract Ultrasound is widely used in nondestructive testing (NDT). It is the basis of many NDT techniques, such as acoustic emission, phased array and synthetic aperture focusing technique. The attenuation of ultrasound is a key factor that ensures the feasibility of these techniques. Conventional studies of attenuation are mostly conducted in specimens that have dimensions smaller than ultrasound wavelengths. In this type of study, reflections from media boundaries interfere with the wave, resulting in a geometry-dependent attenuation that cannot be applied in another specimen with a different geometry, even if the material is identical. Another factor that impacts on the viability of ultrasound NDT techniques is the spatial uniformity of waves in the concrete sample. To serve as a reference in testing defects, the degree of randomness caused by the material’s heterogeneity should be estimated in conditions free of defects. In this study, a large concrete specimen was fabricated to suppress boundary reflections of the wave, creating an environment less dependent on geometry. Twenty-two PZT (lead zirconate-titanate ceramics) transducers were arranged in a three-by-seven array to transmit and receive ultrasound waves. This experiment sought to measure attenuation over distance and by frequency, as well as analyzing attenuation factors such as geometrical spreading and material absorption. A quadratic trend with good consistency between attenuation and frequency was found, indicating minimal local attenuation. The degree of randomness in the wave was measured by three indices: amplitude, group velocity and the frequency spectrum cross-correlation factor. Frequency dispersion was also described using group velocity. The findings of this study can serve as a reference for other NDT research, disclosing geometry-independent attenuation and the variability of wave characteristics in concrete.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Geophysical Methods and Applications · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Estimation of total attenuation and scatterer size from backscattered ultrasound waveforms10.1121/1.1858192 ↗
2. Ultrafast cardiac ultrasound imaging technical principles, applications, and clinical benefits10.1016/j.jcmg.2014.06.004 ↗
3. An experimental feasibility study of pipeline corrosion pit detection using a piezoceramic time reversal mirror10.1088/0964-1726/25/3/037002 ↗
4. Numerical simulation of dynamic tensile-failure of concrete at meso-scale10.1016/j.ijimpeng.2013.12.005 ↗
5. The propagation and attenuation of medium-frequency ultrasonic waves in concrete: a signal analytical approach10.1088/0957-0233/3/1/018 ↗
6. Optimized ultrasonic attenuation measures for non-homogeneous materials10.1016/j.ultras.2015.09.007 ↗
7. Airborne non-contact and contact broadband ultrasounds for frequency attenuation profile estimation of cementitious materials10.1016/j.ultras.2018.03.011 ↗
8. Assessment of broadband ultrasonic attenuation measurements in inhomogeneous media10.1016/S0041-624X(02)00094-X ↗
9. Compactness monitoring of compound concrete filled with demolished concrete lumps using PZT-based smart aggregates10.1061/(ASCE)AS.1943-5525.0000903 ↗
10. A PZT-based smart aggregate for compressive seismic stress monitoring10.1088/0964-1726/21/10/105035 ↗
11. A PZT-based smart aggregate for seismic shear stress monitoring10.1088/0964-1726/22/6/065012 ↗
12. A model for the propagation and scattering of ultrasound in tissue10.1121/1.400497 ↗
13. Numerical study on the impact performances of reinforced concrete beams: a mesoscopic simulation method10.1016/j.engfailanal.2017.06.005 ↗
14. Ultrasonic frequency-dependent amplitude attenuation characteristics technique for nondestructive evaluation of concrete
15. Monitoring of concrete structures using the ultrasonic pulse velocity method10.1088/0964-1726/24/11/113001 ↗
16. Using piezoelectric sensors for ultrasonic pulse velocity measurements in concrete10.1088/0964-1726/22/11/115016 ↗
17. Ultrasonic pulse velocity test of concrete properties as specified in various standards10.1016/0958-9465(96)00026-1 ↗
18. Krautkrämer · 2013
19. Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water/cement ratio and water content10.1016/j.cemconres.2005.11.009 ↗
20. Feasibility study of using smart aggregates as embedded acoustic emission sensors for health monitoring of concrete structures10.1088/0964-1726/25/11/115031 ↗
21. On the measurement of frequency-dependent ultrasonic attenuation in strongly heterogeneous materials10.1016/j.ultras.2010.04.006 ↗
22. Influence of cracks on chloride diffusivity in concrete: a five-phase mesoscale model approach10.1016/j.conbuildmat.2018.11.208 ↗
23. Experimental study of wave dispersion and attenuation in concrete10.1016/j.ultras.2004.12.001 ↗
24. One-sided stress wave velocity measurement in concrete10.1061/(ASCE)0733-9399(1998)124:12(1346) ↗
25. Characterization of entrained air voids using scattered ultrasound10.1063/1.2184679 ↗
26. Crack detection and leakage monitoring on reinforced concrete pipe10.1088/0964-1726/24/11/115020 ↗
27. Bond slip detection of steel plate and concrete beams using smart aggregates10.1088/0964-1726/24/11/115039 ↗
28. Concrete structural health monitoring using embedded piezoceramic transducers10.1088/0964-1726/16/4/003 ↗
29. Smart aggregates: multi-functional sensors for concrete structures-a tutorial and a review10.1088/0964-1726/17/3/033001 ↗
30. Attenuation of ultrasonic pulse in cement mortar10.1016/0008-8846(90)90022-P ↗
31. Modeling of the attenuation of stress waves in concrete based on the Rayleigh damping model using time-reversal and PZT transducers10.1088/1361-665X/aa80c2 ↗
32. Correction for partial reflection in ultrasonic attenuation measurements using contact transducers10.1121/1.3106125 ↗
33. Effects of sand aggregate on ultrasonic attenuation in cement-based materials10.1617/s11527-010-9587-7 ↗
34. Bond slip detection of concrete-encased composite structure using shear wave based active sensing approach10.1088/0964-1726/24/12/125026 ↗
35. Underwater pipeline impact localization using piezoceramic transducers10.1088/1361-665X/aa80c9 ↗