journal article·2022-10-01Open access

Correlation between cyclic topology and shape memory properties of an amine-based thermoset shape memory polymer: a coarse-grained molecular dynamics study

Pouria Nourian, Colin D Wick, Guoqiang Li, Andrew J Peters

Smart Materials and Structures· Volume 31· Issue 10

Abstract

Abstract Defects in crosslinked networks have a negative effect on mechanical and functional properties. In this study, an epoxy resin diglycidyl ether of bisphenol A crosslinked by a hardener 4,4-diaminodiphenyl methane with various cyclic topologies was simulated to find correlations between the mechanical/shape memory properties (i.e. glassy/rubbery elastic modulus, shape recovery ratio, and recovery stress) and cyclic topologies (i.e. number of total loops, number of defective loops (DLs), etc). The effect of cyclic topology on shape memory properties was more significant than its effect on mechanical properties, altering recovery stress by more than 25% on average. After analyzing several topological fingerprints such as total number of loops, number of DLs, and number of higher order loops, we found that the effect of cyclic topology on the mechanical/shape memory properties of the systems can be best understood by the fraction of hardeners reacted with four distinct epoxy molecules (tetra-distinctly-reacted (TDR) hardeners). By increasing the number of TDR hardeners, the network is closer to ideal, resulting in an increase in the number of higher order loops and a reduction in the number of DLs, which in turn leads to an increase in rubbery elastic modulus and shape recovery ratio to a lesser degree, but a substantial increase in recovery stress. These results suggest that utilization of experimental techniques such as semibatch monomer addition, which leads to a more expanded and defect-free network, can result in a simultaneous increase in both shape recovery ratio and recovery stress in thermoset shape memory polymers (TSMPs). Moreover, topology alteration can be used to synthesize TSMPs with improved recovery stress without significantly increasing their stiffness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing · Conducting polymers and applications · Advanced Polymer Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Network structure and the elastic properties of vulcanized rubber10.1021/cr60110a002 ↗
2. Recent advances in shape memory polymers and composites: a review10.1007/s10853-007-2176-7 ↗
3. Water purification by membranes: the role of polymer science10.1002/polb.22037 ↗
4. Science and technology for water purification in the coming decades10.1038/nature06599 ↗
5. Nanoporous organic polymer networks10.1016/j.progpolymsci.2011.09.002 ↗
6. Microporous polycarbazole with high specific surface area for gas storage and separation10.1021/ja300438w ↗
7. Highly stable porous polymer networks with exceptionally high gas-uptake capacities10.1002/adma.201101759 ↗
8. Polymers of intrinsic microporosity (PIMs): organic materials for membrane separations, heterogeneous catalysis and hydrogen storage10.1039/b600349d ↗
9. De Gennes · 1979
10. Flory · 1953
11. Mark · 2007
12. Highly stretchable and tough hydrogels10.1038/nature11409 ↗
13. Synthetic homeostatic materials with chemo-mechano-chemical self-regulation10.1038/nature11223 ↗
14. Emerging applications of stimuli-responsive polymer materials10.1038/nmat2614 ↗
15. Designed biomaterials to mimic the mechanical properties of muscles10.1038/nature09024 ↗
16. High-water-content mouldable hydrogels by mixing clay and a dendritic molecular binder10.1038/nature08693 ↗
17. Growth factors, matrices, and forces combine and control stem cells10.1126/science.1171643 ↗
18. Designing materials for biology and medicine10.1038/nature02388 ↗
19. Synthetic matrix metalloproteinase-sensitive hydrogels for the conduction of tissue regeneration: engineering cell-invasion characteristics10.1073/pnas.0737381100 ↗
20. A thermally re-mendable cross-linked polymeric material10.1126/science.1065879 ↗
21. Hydrogels for tissue engineering10.1021/cr000108x ↗
22. Guo · 2017
23. Review of progress in shape-memory polymers10.1039/b615954k ↗
24. Shape memory polymers and their composites in aerospace applications: a review10.1088/0964-1726/23/2/023001 ↗
25. Fiber reinforced shape-memory polymer composite and its application in a deployable hinge10.1088/0964-1726/18/2/024002 ↗
26. Polyurethane‐carbon nanotube nanocomposites prepared by in‐situ polymerization with electroactive shape memory10.1080/00222340600767471 ↗
27. Thermomechanical characterization of shape memory polymers10.1177/1045389X07086689 ↗
28. Photothermal properties of shape memory polymer micro-actuators for treating stroke10.1002/lsm.10007 ↗
29. Thermomechanical characterization of shape memory polymer–based self-healing syntactic foam sealant for expansion joints10.1061/(ASCE)TE.1943-5436.0000279 ↗
30. Expandable proppants to moderate production drop in hydraulically fractured wells10.1016/j.jngse.2018.04.026 ↗
31. Smart lost circulation materials for productive zones10.1007/s13202-018-0458-z ↗
32. Biodegradable, elastic shape-memory polymers for potential biomedical applications10.1126/science.1066102 ↗
33. Initial and 6-month results of biodegradable poly-l-lactic acid coronary stents in humans10.1161/01.CIR.102.4.399 ↗
34. Novel growth stent for the permanent treatment of vessel stenosis in growing children: an experimental study10.1002/ccd.20136 ↗
35. Long-term assessment of a novel biodegradable paclitaxel-eluting coronary polylactide stent10.1016/j.ehj.2004.06.010 ↗
37. Quantifying the contributions of energy storage in a thermoset shape memory polymer with high stress recovery: a molecular dynamics study10.1016/j.polymer.2020.123319 ↗
38. High enthalpy storage thermoset network with giant stress and energy output in rubbery state10.1038/s41467-018-03094-2 ↗
39. Shape recovery in a thermoset shape memory polymer and its fabric-reinforced composites10.3144/expresspolymlett.2011.25 ↗
40. Shape memory effect and mechanical properties of carbon nanotube/shape memory polymer nanocomposites10.1016/j.compstruct.2006.08.017 ↗
41. Remotely actuated polymer nanocomposites—stress-recovery of carbon-nanotube-filled thermoplastic elastomers10.1038/nmat1059 ↗
42. A review of shape memory polymer composites and blends10.1016/j.compositesa.2009.08.011 ↗
43. Evaluation of nanoparticulate fillers for development of shape memory polyurethane nanocomposites10.1016/j.polymer.2008.03.021 ↗
44. Shape memory polymer nanocomposites10.1016/S1359-6454(02)00368-3 ↗
45. Bending behavior of shape memory polymer based laminates10.1016/j.compstruct.2005.08.029 ↗
46. Carbon fiber reinforced shape memory polymer composites10.1106/EJGR-EWNM-6CLX-3X2M ↗
47. The effect of primary cyclization on free radical polymerization kinetics: experimental characterization10.1016/S0032-3861(02)00734-6 ↗
48. Effect of primary cyclization on free radical polymerization kinetics: modeling approach10.1021/ma012001x ↗
49. Odian · 2004
50. Entanglements, defects, and inhomogeneities in nitrile butadiene rubbers: macroscopic versus microscopic properties10.1021/acs.macromol.6b01802 ↗
51. Network formation and degradation behavior of hydrogels formed by Michael-type addition reactions10.1021/bm049607o ↗
52. Structure and swelling of poly(acrylic acid) hydrogels: effect of pH, ionic strength, and dilution on the crosslinked polymer structure10.1016/j.polymer.2003.12.040 ↗
53. Conformational entropy of an ideal cross-linking polymer chain10.3390/e10030285 ↗
54. Nanofiber garlands of polycaprolactone by electrospinning10.1016/S0032-3861(02)00595-5 ↗
55. Topology of poly(dimethylsiloxane) elastomeric networks studied by variable-temperature solid-state nuclear magnetic resonance10.1021/ma00162a015 ↗
56. Counting secondary loops is required for accurate prediction of end-linked polymer network elasticity10.1021/acsmacrolett.8b00008 ↗
57. Universal cyclic topology in polymer networks10.1103/PhysRevLett.116.188302 ↗
58. Topological structure of networks formed from symmetric four-arm precursors10.1021/acs.macromol.7b01829 ↗
59. Transition between phantom and affine network model observed in polymer gels with controlled network structure10.1021/ma302270a ↗
60. Quantifying the impact of molecular defects on polymer network elasticity10.1126/science.aag0184 ↗
61. Machine-learning assisted coarse-grained model for epoxies over wide ranges of temperatures and cross-linking degrees10.1016/j.matdes.2019.108130 ↗
62. Chemically specific coarse‐graining of polymers: methods and prospects10.1002/pol.20210555 ↗
63. Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films10.1103/PhysRevB.42.9458 ↗
64. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
65. A unified formulation of the constant temperature molecular dynamics methods10.1063/1.447334 ↗
66. Rapid estimation of elastic constants by molecular dynamics simulation under constant stress10.1103/PhysRevB.69.134103 ↗
67. Polymatic: a generalized simulated polymerization algorithm for amorphous polymers10.1007/s00214-013-1334-z ↗
68. Effect of atomistic fingerprints on thermomechanical properties of epoxy-diamine thermoset shape memory polymers10.1016/j.polymer.2022.124577 ↗
69. Semibatch monomer addition as a general method to tune and enhance the mechanics of polymer networks via loop-defect control10.1073/pnas.1620985114 ↗