journal article·2023-09-01Open access

A three-stage amplification piezoelectric-actuated micro-gripper with adjustable output displacement: design, modeling, and experimental evaluation

Dongmei Xu, Fan Yang, Simiao Yu, Chao Xu, Xianglong Liu, Zhiwei Zhao, Xuhui Zhang, Shuaitian Li, Huixi Yang, Qi Lu

Smart Materials and Structures· Volume 32· Issue 9

Abstract

Abstract With the development of science and technology, the performance requirements of micro-gripper are getting higher and higher. Therefore, this paper designs a new piezoelectric-driven micro-gripper with large and adjustable output displacement, which can adjust the output range and compensate the errors caused by flexible mechanism. By adjusting the output displacement, the micro-components of different sizes can be clamped. The three-stage amplification mechanism is adopted, which utilizes triangle and lever amplification. Using the pseudo-rigid body method, the flexible hinge is analyzed; the statics, kinematics and dynamics models are established. Through finite element method, the magnification ratio of the micro-gripper is obtained, then the structure of the micro-gripper is further optimized. The output displacement and the magnification of the single-arm of the micro-gripper under 135 V are 223.8 μ m and 24.2 times, respectively. This paper provides a basis for the wide application of micro-gripper.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Micro and Nano Robotics · Piezoelectric Actuators and Control · Cellular Mechanics and Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Piezoelectric actuator for machining on macro-to-micro cylindrical components by a precision rotary motion control10.1016/j.ymssp.2018.05.035 ↗
2. A two degree of freedom micro-gripper with grasping and rotating functions for optical fibers assembling10.1063/1.4832045 ↗
3. Study of forces during microassembly tasks using two-sensing-fingers grippers10.1109/TMECH.2011.2131673 ↗
4. OctoMag: an electromagnetic system for 5-DOF wireless micromanipulation10.1109/TRO.2010.2073030 ↗
5. Nonlinear dynamic analysis and optimal trajectory planning of a high-speed macro-micro manipulator10.1016/j.jsv.2017.05.047 ↗
6. A coupled field study on the non-linear dynamic characteristics of an electrostatic micropump10.1016/S0022-460X(03)00517-0 ↗
7. Design of quasi-zero stiffness joint actuator and research on vibration isolation performance10.1016/j.jsv.2020.115367 ↗
8. Nanonewton force-controlled manipulation of biological cells using a monolithic MEMS microgripper with two-axis force feedback10.1088/0960-1317/18/5/055013 ↗
9. Electrothermally activated SU-8 microgripper for single cell manipulation in solution10.1109/JMEMS.2005.845445 ↗
10. SMA microgripper with integrated antagonism10.1016/S0924-4247(99)00385-4 ↗
11. Fabrication and characterization of an SU-8 gripper actuated by a shape memory alloy thin film10.1088/0960-1317/13/2/323 ↗
12. A microgripper using piezoelectric actuation for micro-object manipulation10.1016/j.sna.2006.03.014 ↗
13. Mechanical and control-oriented design of a monolithic piezoelectric microgripper using a new topological optimization method10.1109/TMECH.2008.2003437 ↗
14. Design and performance evaluation of a single-phase driven ultrasonic motor using bending-bending vibrations10.3390/mi12080853 ↗
15. Investigation of oscillations of piezoelectric actuators with multi-directional polarization10.1016/j.ymssp.2017.06.036 ↗
16. A novel hybrid actuation mechanism based XY nanopositioning stage with totally decoupled kinematics10.1016/j.ymssp.2017.07.010 ↗
17. Rhombic micro-displacement amplifier for piezoelectric actuator and its linear and hybrid model10.1016/j.ymssp.2014.05.047 ↗
18. Stroke maximizing and high efficient hysteresis hybrid modeling for a rhombic piezoelectric actuator10.1016/j.ymssp.2015.12.007 ↗
19. Displacement amplification and differential actuation in piezo driven nanopositioners10.1016/j.ymssp.2020.107356 ↗
20. A general two-port dynamic stiffness model and static/dynamic comparison for three bridge-type flexure displacement amplifiers10.1016/j.ymssp.2018.10.007 ↗
21. A novel large stepping-stroke actuator based on the bridge-type mechanism with asymmetric stiffness10.1016/j.ymssp.2022.109317 ↗
22. Development of a novel flexure-based microgripper for high precision micro-object manipulation10.1016/j.sna.2009.01.016 ↗
23. A new piezo-driven microgripper based on the double-rocker mechanism10.1088/0964-1726/24/7/075031 ↗
24. A monolithic compliant piezoelectric-driven microgripper: design, modeling, and testing10.1109/TMECH.2011.2163200 ↗
25. Design of a piezoelectric-actuated microgripper with a three-stage flexure-based amplification10.1109/TMECH.2014.2368789 ↗
26. A novel compliant piezoelectric actuated symmetric microgripper for the parasitic motion compensation10.1016/j.mechmachtheory.2020.104069 ↗
27. Design and analysis of compliant micro-gripper using pseudo rigid body model (PRBM)10.1016/j.matpr.2017.02.010 ↗
28. Design of a compliant adjustable constant-force gripper based on circular beams10.1016/j.mechmachtheory.2022.104843 ↗
29. Design and modeling of a compliant gripper with parallel movement of jaws10.1016/j.mechmachtheory.2020.103942 ↗
30. A simple and efficient dynamic modeling method for compliant micropositioning mechanisms using flexure hinges, device and process technologies for MEMS10.1117/12.523573 ↗
31. Design and analysis of a micro-gripper with constant force mechanism10.1109/WCICA.2016.7578303 ↗
32. Design and development of a new piezoelectric-actuated biaxial compliant microgripper with long strokes10.1109/TASE.2022.3145670 ↗