Flexural behaviour of cementitious composites embedded with 3D printed re-entrant chiral auxetic meshes
Source abstract
Abstract
Abstract 3D printed auxetic metamaterials can be used to make high performing cementitious composites to strengthen existing structures and elements due to their negative Poisson’s ratio behaviour and high energy absorbing characteristics. In this paper, three different re-entrant chiral auxetic (RCA) meshes of various cell geometries and orientations were developed by 3D printing them using poly-lactic acid (PLA) and thermoplastic polyurethane (TPU) filament. The developed meshes were tested under out-of-plane flexure to study their load carrying capacity, ductility and energy absorption characteristics, especially to characterise the best cell orientation. The horizontal cells provided enhanced load carrying and energy absorption characteristics for all three cell geometries for both materials. These RCA meshes were then embedded into low and high strength premix cement mortar matrices to develop auxetic cementitious composites (ACCs). In total, 42 ACC specimens were casted and tested under flexural loading. The results were studied in terms of their failure patterns, load-displacement responses, flexural capacities, ductility and energy absorption. The RCA meshes made of PLA filament showed limited capacity and energy absorption as compared to RCA meshes made of TPU filament due to extended flexibility and resilience provided by TPU meshes. The RCA meshes with a denser cell structure exhibited highest flexural capacity and effective energy absorption of 14 700 kJ m−2 for TPU-RCA mesh embedded into high strength cement mortar matrix. The results obtained in this study have enabled to understand the flexural behaviour of cementitious composites embedded with 3D printed auxetic lattices and to strengthen the existing structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Innovations in Concrete and Construction Materials · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Defense applications of auxetic materials
2. Auxetic metamaterials and structures: a review10.1088/1361-665X/aaa61c ↗
3. Modal characteristics and damping enhancement of carbon fiber composite auxetic double-arrow corrugated sandwich panels10.1016/j.compstruct.2018.07.006 ↗
4. 3Dprinting shape memory polymer of laminated multi-component metamaterial towards optimization of auxetic and shape recovery behaviors10.1088/1361-665X/acb187 ↗
5. Behaviour of 3D printed re-entrant chiral auxetic (RCA) geometries under in-plane and out-of-plane loadings10.1088/1361-665X/ac2811 ↗
6. Enhancing indentation and impact resistance in auxetic composite materials10.1016/j.compositesb.2020.108229 ↗
7. Bending behavior of sandwich composite structures with tunable 3D-printed core materials10.1016/j.compstruct.2017.05.001 ↗
8. Behavior of auxetic structures under compression and impact forces10.1088/1361-665X/aaa3cf ↗
9. 3D printed honeycomb cellular beams made of composite materials (plastic and timber10.1016/j.conbuildmat.2021.125541 ↗
10. Investigation on the flexural properties of sandwich beams with auxetic core10.1007/s40430-022-03368-3 ↗
11. Dynamic performance of auxetic structures: experiments and simulation10.1088/1361-665X/ab79bb ↗
12. Impact energy absorption composites with shear stiffening gel-filled negative Poisson’s ratio skeleton by Kirigami method10.1016/j.compstruct.2022.116009 ↗
13. Mechanical properties of hybrid metamaterial with auxetic chiral cellular structure and silicon filler10.1016/j.compstruct.2019.111718 ↗
14. Auxetic composite made with multilayer orthogonal structural reinforcement10.1016/j.compstruct.2015.08.110 ↗
15. Geometrically modified auxetic polyurethane foams and their potential application in impact mitigation of masonry structures10.1016/j.conbuildmat.2021.125170 ↗
16. Energy absorption properties of composite tubes with hexagonal and re-entrant honeycomb fillers10.1016/j.conbuildmat.2022.129298 ↗
17. Experimental and computational investigations of novel 3D printed square tubular lattice metamaterials with negative Poisson’s ratio10.1016/j.addma.2022.102789 ↗
18. Enhanced compressive mechanical properties of aluminum based auxetic lattice structures filled with polymers10.1016/j.compositesb.2019.05.002 ↗
19. A novel auxetic chiral lattice composite: experimental and numerical study10.1016/j.compstruct.2021.115043 ↗
20. Use of 3D printing to create multifunctional cementitious composites: review, challenges and opportunities10.21809/rilemtechlett.2020.113 ↗
21. Recent advances in auxetics: applications in cementitious composites10.1177/20414196211062620 ↗
22. Characterisation of cementitious polymer mortar–Auxetic foam composites10.1016/j.conbuildmat.2017.04.151 ↗
23. A novel cement-based auxetic foam composite: experimental study10.1016/j.cscm.2022.e01159 ↗
24. Experimental evaluation of compressive characteristics of cementitious composites reinforced by auxetic mesh10.14190/JRCR.2017.5.2.198 ↗
25. Evaluation of tensile characteristics of cementitious composites reinforced by auxetic mesh10.14190/JRCR.2017.5.2.192 ↗
26. Development of novel auxetic structures based on braided composites10.1016/j.matdes.2014.04.067 ↗
27. Development, characterization and analysis of auxetic structures from braided composites and study the influence of material and structural parameters10.1016/j.compositesa.2016.04.020 ↗
28. 3D printed auxetic forms on knitted fabrics for adjustable permeability and mechanical properties10.1088/1757-899X/137/1/012011 ↗
29. Characterisation of polymer cement mortar composites containing carbon fibre or auxetic fabric overlays and inserts under flexure10.1016/j.conbuildmat.2019.07.120 ↗
30. The helical auxetic yarn–a novel structure for composites and textiles; geometry, manufacture and mechanical properties10.1016/j.mechmat.2011.05.003 ↗
31. Impact mitigation of masonry walls with carbon fibre and Auxetic fibre composite renders–A numerical study10.1016/j.istruc.2020.09.047 ↗
32. Bioinspired design of architected cement-polymer composites10.1016/j.cemconcomp.2018.12.010 ↗
33. Cementitious cellular composites with auxetic behavior10.1016/j.cemconcomp.2020.103624 ↗
34. Auxetic behavior of cementitious cellular composites under uniaxial compression and cyclic loading
35. Tunable mechanical behavior of auxetic cementitious cellular composites (CCCs): experiments and simulations10.1016/j.conbuildmat.2020.121388 ↗
36. Elucidating the auxetic behavior of cementitious cellular composites using finite element analysis and interpretable machine learning10.1016/j.matdes.2021.110341 ↗
37. Bioinspired cementitious materials: main strategies, progress, and applications10.3389/fmats.2020.00062 ↗
38. Auxetic boosting of confinement in mortar by 3D reentrant truss lattices for next generation steel reinforced concrete members10.1016/j.eml.2022.101681 ↗
39. Mechanical properties of concrete composites with auxetic single and layered honeycomb structures10.1016/j.conbuildmat.2022.126453 ↗
40. A novel concrete-filled auxetic tube composite structure: design and compressive characteristic study10.1016/j.engstruct.2022.114759 ↗
41. Experimental and numerical investigation of low velocity impact response of foam concrete filled auxetic honeycombs10.1016/j.tws.2020.106898 ↗
42. Based on auxetic foam: a novel type of seismic metamaterial for Lamb waves10.1016/j.engstruct.2021.112976 ↗
43. Multifunctional nanogenerator-integrated metamaterial concrete systems for smart civil infrastructure10.1002/adma.202211027 ↗
44. Static and dynamic compressive behaviour of 3D printed auxetic lattice reinforced ultra-high performance concrete10.1016/j.cemconcomp.2023.105046 ↗
45. Cementitious composites reinforced with 3D printed functionally graded polymeric lattice structures: experiments and modelling10.1016/j.addma.2021.101887 ↗
46. Standard Test Method for Tensile Properties of Plastics
47. Standard Test Method for Compressive Properties of Rigid Plastics
48. Characterisation and strategies for mitigation of the contact surface unevenness in dry-stack masonry10.1016/j.conbuildmat.2018.03.002 ↗
49. Investigating mechanical, thermal, and flammability properties of thermoplastic polyurethane/carbon nanotube composites10.1177/0892705717743292 ↗
50. Compressive properties of a novel additively manufactured 3D auxetic structure10.1088/1361-665X/ab0dd6 ↗
51. Experimental and numerical investigation of the static behavior of a 3D printed bio-based anti-trichiral sandwich10.1177/00219983231169332 ↗
52. AS 1012.9 · 2014