journal article·2023-05-01

Saturation correction for a piezoelectric shunt absorber based on 2:1 internal resonance using a cubic nonlinearity

Zein Alabidin Shami, Christophe Giraud-Audine, Olivier Thomas

Smart Materials and Structures· Volume 32· Issue 5
Publisher page

Abstract

Abstract In this study, we present a theoretical and experimental analysis of an antiresonance detuning correction for a nonlinear piezoelectric shunt absorber based on a two-to-one internal resonance. Thanks to this purely nonlinear feature, the oscillations of the primary system become independent of the forcing at a particular antiresonance frequency, thus creating an efficient reduction of the vibration. Past works of the literature present the design of the piezoelectric shunt and show that it is subjected to a softening behavior that detunes the antiresonance frequency as a function of the amplitude and thus degrades the performance. It is also shown that this softening behavior is caused by some non-resonant terms present in the equations, linked to the piezoelectric coupling. To counteract this undesired effect, we propose in this work to add a cubic nonlinearity in the shunt circuit, in addition to the quadratic one already present. Its tuning is based on a normal form analysis already published, which shows how cubic nonlinearities can cancel the effect of quadratic non-resonant terms. The present article describes the main features of the theory and focuses on the experimental proof of concept of this antiresonance detuning correction as well as the analysis of its range of validity. It is applied to the damping of the first bending mode of a hydrodynamic foil structure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Vibration Control and Rheological Fluids · Aeroelasticity and Vibration Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Damping torsional vibrations in crank shafts
2. Device for damping vibrations of bodies
3. Damping of structural vibrations with piezoelectric materials and passive electrical networks10.1016/0022-460X(91)90762-9 ↗
4. Electromagnetic shunt damping
5. Vibration and noise control using shunted piezoelectric transducers: a review10.1016/j.ymssp.2018.04.041 ↗
6. Review on the use of piezoelectric materials for active vibration, noise and flow control10.1088/1361-665X/ab7541 ↗
7. Enhancement of a dynamic vibration absorber by means of an electromagnetic shunt10.1177/1045389X20957097 ↗
8. A critical analysis of electric shunt circuits employed in piezoelectric passive vibration damping10.1088/0964-1726/10/5/322 ↗
9. Performance of piezoelectric shunts for vibration reduction10.1088/0964-1726/21/1/015008 ↗
10. Broadband vibration damping of non-periodic plates by piezoelectric coupling to their electrical analogues10.1088/1361-665X/ab7948 ↗
11. Comparison of passive damping treatments based on constrained viscoelastic layers and multi-resonant piezoelectric networks10.25518/2684-6500.63 ↗
12. Multi-mode piezoelectric shunt damping with residual mode correction by evaluation of modal charge and voltage10.1177/1045389X19891646 ↗
13. Shunts vs networks: tuning and comparison of centralized and decentralized piezoelectric vibration absorbers10.1088/1361-665X/ac92b0 ↗
14. Improved resistive shunt by means of negative capacitance: new circuit, performances and multi-mode control10.1088/0964-1726/25/7/075033 ↗
15. Guidelines for the layout and tuning of piezoelectric resonant shunt with negative capacitances in terms of dynamic compliance, mobility and accelerance10.1177/1045389X20986991 ↗
16. Tunable electromagnetic resonant shunt using pulse-width modulation10.1016/j.jsv.2021.116018 ↗
17. High-voltage synthetic inductor for vibration damping in resonant piezoelectric shunt10.1177/1077546320952612 ↗
18. A nonlinear piezoelectric shunt absorber with a 2:1 internal resonance: theory10.1016/j.ymssp.2021.108768 ↗
19. A nonlinear piezoelectric shunt absorber with 2:1 internal resonance: experimental proof of concept10.1088/1361-665X/ac4ab5 ↗
20. Energy pumping in nonlinear mechanical oscillators: part ii—resonance capture10.1115/1.1345525 ↗
21. Essentially nonlinear piezoelectric shunt circuits applied to mistuned bladed disks10.1016/j.jsv.2013.12.019 ↗
22. An experimentally validated piezoelectric nonlinear energy sink for wideband vibration attenuation10.1016/j.jsv.2018.08.038 ↗
23. Nonlinear generalization of Den Hartog’s equal-peak method10.1016/j.ymssp.2014.08.009 ↗
24. A fully passive nonlinear piezoelectric vibration absorber10.1098/rsta.2017.0142 ↗
25. An analogue twin for piezoelectric vibration damping of multiple nonlinear resonances10.1016/j.jsv.2021.116323 ↗
26. A digital nonlinear piezoelectric tuned vibration absorber10.1088/1361-665X/ab5176 ↗
27. Vibration control with state-switched piezoelectric materials10.1106/18CE-77K4-DYMG-RKBB ↗
28. Semi-passive damping using continuous switching of a piezoelectric device
29. A nonlinear tunable piezoelectric resonant shunt using a bilinear component: theory and experiment10.1007/s11071-022-08217-5 ↗
30. Duffing-type digitally programmable nonlinear synthetic inductance for piezoelectric structures10.1088/1361-665X/ac858b ↗
31. Nayfeh · 1979
32. Dynamics of structures with wideband autoparametric vibration absorbers: theory10.1098/rspa.2003.1204 ↗
33. Effects of nonlinear interactions of flexural modes on the performance of a beam autoparametric vibration absorber10.1177/1077546319889839 ↗
34. Subharmonic pendulum vibration absorbers allowing a rotational mobility10.1016/j.ymssp.2022.109125 ↗
35. Experimental implementation of the internal resonance control strategy10.1006/jsvi.1996.0129 ↗
36. A theoretical and experimental implementation of a control method based on saturation10.1023/A:1008207124935 ↗
37. A nonlinear vibration absorber for flexible structures10.1023/A:1008250524547 ↗
38. Structural vibration control using pzt patches and non-linear phenomena10.1006/jsvi.1998.1612 ↗
39. Dynamics regulation of a skew cantilever plate using PZT patches and saturation phenomenon10.1106/YGDK-KEVQ-266X-8TPC ↗
40. Dynamics of a cubic nonlinear vibration absorber10.1023/A:1008358825502 ↗
41. Nonlinear dynamics of coupled oscillators in 1:2 internal resonance: effects of the non-resonant quadratic terms and recovery of the saturation effect10.1007/s11012-022-01566-w ↗
42. ANSI/IEEE Std 176-1987 · 198810.1109/IEEESTD.1988.79638 ↗
43. Nayfeh · 1979
44. A generic and efficient Taylor series-based continuation method using a quadratic recast of smooth nonlinear systems10.1002/nme.6049 ↗
45. A purely frequency based Floquet-Hill formulation for the efficient stability computation of periodic solutions of ordinary differential systems10.1016/j.jcp.2020.109477 ↗
46. Vibration damping of marine lifting surfaces with resonant piezoelectric shunts10.1016/j.jsv.2020.115921 ↗
47. Asymmetric non-linear forced vibrations of free-edge circular plates, part 2: experiments10.1016/S0022-460X(02)01564-X ↗
48. Voltage-controlled synthetic inductors for resonant piezoelectric shunt damping: a comparative analysis10.3390/app9224777 ↗
49. Normal form theory and nonlinear normal modes: theoretical settings and applications
50. Model order reduction methods for geometrically nonlinear structures: a review of nonlinear techniques10.1007/s11071-021-06693-9 ↗