Tunable 3D printed composite metamaterials with negative stiffness
Source abstract
Abstract
Abstract The paper proposes a class of tunable metamaterials that use inclined beams to achieve instability in a rigid system. Three different beam tilt angles, 25°, 45°, and 60°, are evaluated in the form of unit cells using quasi-static compression tests and numerical simulations. Snap-through behavirous are characterised by structural stiffness and buckling load. Periodic and gradient structures are assembled and analysed by arranging the unit cells in rows and columns. Size effect analyses and parametric studies are carried out on various unit-cell arrangements and different beam angles. The proposed metamaterials are manufactured through fused filament fabrication 3D printing technology with a composite material, onyx. The results from experiments, finite element analysis, and analytical models are compared and evaluated. The structural stiffness and buckling load are shown to be positively related to the inclination angle of the tilted beams. The number of rows of unit cells governs the nonlinear mechanical response (number of snap-throughs) of multiple-layered structures. By increasing the number of rows and columns of unit cells, which are less prone to manufacturing defects, the reliability and repeatability of the structural properties of periodic/gradient structures could be improved. A design plot is also provided to predict and tune the snap-through behaviour of multiple-layered structures via beam angles and unit-cell arrangements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Materials and Mechanics · Cellular and Composite Structures · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Flexible mechanical metamaterials10.1038/natrevmats.2017.66 ↗
2. Snapping mechanical metamaterials under tension10.1002/adma.201502809 ↗
3. Negative poisson’s ratio behavior induced by an elastic instability10.1002/adma.200901956 ↗
4. Multi-stable mechanical metamaterials with shape-reconfiguration and zero poisson’s ratio10.1016/j.matdes.2018.04.064 ↗
5. Enhanced energy dissipation in periodic epoxy nanoframes10.1021/nl1012773 ↗
6. Combinatorial design of textured mechanical metamaterials10.1038/nature18960 ↗
7. How the Venus flytrap snaps10.1038/nature03185 ↗
8. Simitses · 2006
9. Novel multidirectional negative stiffness mechanical metamaterials10.1088/1361-665X/ab47d9 ↗
10. Mechanical design of negative stiffness honeycomb materials10.1186/s40192-015-0038-8 ↗
11. Negative stiffness honeycombs for recoverable shock isolation10.1108/RPJ-12-2014-0182 ↗
12. Additively manufactured conformal negative stiffness honeycombs
13. Phase transforming cellular materials10.1016/j.eml.2015.08.001 ↗
14. Multistable architected materials for trapping elastic strain energy10.1002/adma.201501708 ↗
15. Multistable shape‐reconfigurable architected materials10.1002/adma.201601650 ↗
16. Design and characterization of multi-stable mechanical metastructures with level and tilted stable configurations10.1016/j.eml.2019.100593 ↗
17. Concepts for morphing airfoil sections using bi-stable laminated composite structures10.1016/j.tws.2007.11.002 ↗
18. Buckling-induced smart applications: recent advances and trends10.1088/0964-1726/24/6/063001 ↗
19. Bistable arches for morphing applications10.1177/1045389X12457252 ↗
20. Snap-through behavior of bistable beam with variable sections: mechanical model and experimental study10.1088/1361-665X/ac8847 ↗
21. Deterministic snap-through buckling and energy trapping in axially-loaded notched strips for compliant building blocks10.1088/1361-665X/ab6486 ↗
22. A novel composite negative stiffness structure for recoverable trapping energy10.1016/j.compositesa.2019.105697 ↗
23. A multi-stage high-speed railroad vibration isolation system with ‘negative’ stiffness10.1016/j.jsv.2011.09.014 ↗
24. Stretchable materials for robust soft actuators towards assistive wearable devices10.1038/srep34224 ↗
25. Effect of print speed and build orientation on tensile strength of FDM 3D printed PLA specimens
26. FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments10.3390/polym12071529 ↗
27. Mechanical property of FDM printed ABS: influence of printing parameters10.1007/s00170-019-03313-0 ↗
28. Dynamics of snapping beams and jumping poppers10.1209/0295-5075/105/24001 ↗
29. Synergistic energy absorption mechanisms of architected liquid crystal elastomers10.1002/adma.202200272 ↗
30. A novel gradient negative stiffness honeycomb for recoverable energy absorption10.1016/j.compositesb.2021.108745 ↗
31. Snap-through of elastic bistable beam under contactless magnetic actuation10.1016/j.ijnonlinmec.2019.103358 ↗
32. Bistable buckled beam: modeling of actuating force and experimental validations10.1115/1.3179003 ↗
33. Planar gradient metamaterials10.1038/natrevmats.2016.67 ↗
34. The mechanical characteristics of graded Miura-ori metamaterials10.1016/j.matdes.2021.110173 ↗
35. Two-dimensional graded metamaterials with auxetic rectangular perforations10.1016/j.compstruct.2020.113313 ↗
36. Response of graded Miura-ori metamaterials to quasi-static and dynamic in-plane compression10.1061/(ASCE)AS.1943-5525.0001416 ↗
37. Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading10.1016/j.compositesb.2016.09.037 ↗
38. Development and characterisation of novel three-dimensional axisymmetric chiral auxetic structures10.1016/j.jmrt.2022.02.025 ↗
39. Compression and shear behaviour of graded chiral auxetic structures10.1016/j.mechmat.2020.103524 ↗
40. A review of recent research on bio-inspired structures and materials for energy absorption applications10.1016/j.compositesb.2019.107496 ↗
41. Bamboo-inspired, simulation-guided design and 3D printing of light-weight and high-strength mechanical metamaterials10.1016/j.apmt.2021.101268 ↗
42. Compression and buckling analysis of 3D printed carbon fibre-reinforced polymer cellular composite structures10.1016/j.compstruct.2022.116167 ↗
43. Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers10.1016/j.compositesb.2017.05.013 ↗
44. Distribution and orientation of carbon fibers in polylactic acid parts produced by fused deposition modeling
45. Characterizing short-fiber-reinforced composites produced using additive manufacturing10.1080/20550340.2017.1341125 ↗
46. Highly oriented carbon fiber–polymer composites via additive manufacturing10.1016/j.compscitech.2014.10.009 ↗
47. Micro carbon fiber filled nylon that forms the foundation of Markforged composite parts
48. Rees · 2009
49. Optimization of FDM printing process parameters on surface finish, thickness, and outer dimension with ABS polymer specimens using taguchi orthogonal array and genetic algorithms10.1155/2022/2698845 ↗
50. The effect of unit cell size and topology on tensile failure behavior of 2D lattice structures10.1016/j.ijmecsci.2019.105342 ↗