Design, structure analysis and shock control of aircraft landing gear system with MR damper
Source abstract
Abstract
Abstract This study proposes a new magneto-rheological aircraft main landing gear (MRAMLG) system and comprehensively treats from a mathematical modelling to drop testing for the evaluation of the landing efficiency. A mathematical model is formulated based on specifications and requirements of existing small aircraft Oleo type landing gear system. To ensure structural stability of the landing gear components such as main trust, column and trunnion, a transient structural analysis is carried out using the finite element method (FEM) and a fatigue life is analysed based on empirical formulas and the rainflow-counting (RC) algorithm. Subsequently, a novel controller is formulated to enhance the landing efficiency by integrating the time delay model and 3-stage hysteresis regulator. In the synthesis of the controller, a desired force model based on the energy law is added to accurately track the desired yield stress needed for the desired field-dependent force. In this work, the proposed control algorithm is named as the model-based force-tracking (MBFT) controller. To evaluate the landing efficiency or shock struct efficiency (SSE) of the proposed MRAMLG, an experimental apparatus for drop test is designed and manufactured by considering a dummy (sprung) mass of 640–720 kg at the maximum sink speed of 3 m s −1 . The sink speed represents the rate of descent of the MRAMLG’s tire just before it touches the ground. It is demonstrated from simulation and experiment that the SSE with the MBFT controller is higher than 83% across various landing conditions with different sprung mass and sink speed, while the conventional controllers, proportional-integral and skyhook, compared to MBFT, do not show consistent performance depending on the sprung mass and sink speed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Engineering and Vibrations Research · Vehicle Dynamics and Control Systems · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Currey · 1988
2. Oleopneumatic shock strut dynamic analysis and its real-time simulation10.2514/3.44526 ↗
3. Optimization of an oleo-pneumatic shock absorber for main landing gear of a commercial aircraft10.2139/ssrn.3101400 ↗
4. Including inerters in aircraft landing gear shock strut to improve the touch-down performance10.1016/j.proeng.2017.09.366 ↗
5. Control of landing efficiency of an aircraft landing gear system with magnetorheological dampers10.2514/1.C035298 ↗
6. New control logic based on mechanical energy conservation for aircraft landing gear system with magnetorheological dampers10.1088/1361-665X/ab9e11 ↗
7. Landing efficiency control of a six degrees of freedom aircraft model with magneto-rheological dampers: part 2—control simulation10.1177/1045389X20942593 ↗
8. Intelligent control based on a neural network for aircraft landing gear with a magnetorheological damper in different landing scenarios10.3390/app10175962 ↗
9. Monte Carlo simulation of MR damper landing gear taxiing mode under nonstationary random excitation10.20910/JASE.2020.14.4.10 ↗
10. Landing efficiency control of a six-degree-of-freedom aircraft model with magnetorheological dampers: part 1—modeling10.1177/1045389X20942578 ↗
11. Magnetorheological semi-active shock mitigation control. Part 1: numerical analysis and preliminary tests10.1177/1045389X221151071 ↗
12. Magnetorheological semi-active shock mitigation control: part II: system extension and application analysis10.1177/1045389X221151072 ↗
13. Adaptive magnetorheological energy absorber control method for drop-induced shock mitigation10.1177/1045389X20957100 ↗
14. Optimal control of drop-induced shock mitigation using magnetorheological energy absorbers considering quadratic damping10.1177/1045389X21993920 ↗
15. Regulations · 1989
16. A new design model of an MR shock absorber for aircraft landing gear systems considering major and minor pressure losses: experimental validation10.3390/app11177895 ↗
17. Aircraft landing gear system with magnetorheological shock strut: performance evaluation via drop test10.1177/1045389X221147632 ↗
18. Cumulative damage in fatigue10.1115/1.4009458 ↗
19. Damage evaluation of metals for random on varying loading-three aspects of rain flow method
20. Goodman · 1919
21. Fatigue properties of SUS304 stainless steel after ultrasonic nanocrystal surface modification (UNSM)10.1142/S201019451200339X ↗
22. Effect of shot peening on mechanical properties for steel AISI 100810.24237/djes.2019.12205 ↗
23. Plastic strain localization in metals: origins and consequences10.1016/j.pmatsci.2013.06.001 ↗
24. A wireless fatigue monitoring system utilizing a bio-inspired tree ring data tracking technique10.3390/s140304364 ↗
25. A FUZZY logic based model to predict the fretting fatigue life of aerospace Al7075-T6 alloy
26. Basics of aircraft maintenance reserve development and management
27. Vibration control using semi-active force generators10.1115/1.3438373 ↗
28. Extended ground-hook-new concept of semi-active control of truck’s suspension10.1080/00423119708969333 ↗
29. A new adaptive fuzzy PID controller based on Riccati-like equation with application to vibration control of vehicle seat suspension10.3390/app9214540 ↗
30. Large-scale MR fluid dampers: modeling and dynamic performance considerations10.1016/S0141-0296(01)00097-9 ↗