4D printing of polylactic acid (PLA)/PLA-thermoplastic polyurethane (TPU)-based metastructure: examining the mechanical, thermal, and shape memory properties
Source abstract
Abstract
Abstract In the present day and age, increasing demand concerning the enhancement of the mechanical performance of shape memory polymer (SMP) based structures has paved the way for developing newer metastructures of enhanced load-bearing, damping capacity, and durability. The present study focuses on developing SMP-based metastructures made of commercially available polylactic acid (PLA) and 30% by wt. of thermoplastic polyurethane (TPU) blended PLA. The designed metastructures are initially analyzed using numerical modeling to prevent lateral deformation, acute stress concentration zones, and row-wise collapse. Mechanical tests reveal that blending TPU with PLA enhances the material’s flexibility and ductility, further improving the toughness and fracture resistance of the built metastructures. Loading-unloading and shape recovery tests (under compression mode) of the s-shape metastructure reveal that the PLA/TPU metastructure withstands ≅ 170 N load, less than neat PLA’s ≅ 223 N due to TPU’s flexibility. PLA/TPU endures 30 cycles, while PLA fails after the 9th cycle. In shape recovery plots, PLA/TPU metastructures exhibit a lower standard deviation (∼0.32%) than PLA (∼1.4%), attributed to the entropy decrease and cross-linkage disentanglements of PLA. Furthermore, a dynamic mechanical analyzer (DMA) assesses glass transition temperature, energy storage capability, and dissipation in variation with the temperature. The nephograms of ABAQUS result divulge accurate fracture initiation locations of the metastructure unit cells, which involves implementing ductile damage behavior modeling by employing damage initiation and evolution parameters. Finally, assessing compression tests and shape recovery behavior results elucidates that these SMP-based metastructures are promising for load-bearing pallets in the transporting and packaging industries, providing superior damping and self-repairing capabilities during significant plastic deformations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. 4D-Printed dynamic materials in biomedical applications: chemistry, challenges, and their future perspectives in the clinical sector10.1021/acs.jmedchem.9b02115 ↗
2. Shape-adaptive metastructures with variable bandgap regions by 4D printing10.3390/polym12030519 ↗
3. Exploring the dynamics of hourglass shaped lattice metastructures10.1038/s41598-020-77226-4 ↗
4. Systematic design of high-strength multicomponent metamaterials10.1016/j.matdes.2019.108124 ↗
5. Development of a new span-morphing wing core design10.3390/designs3010012 ↗
6. Foam structures with a negative poisson’s ratio10.1126/science.235.4792.1038 ↗
7. 3D-printed soft and hard meta-structures with supreme energy absorption and dissipation capacities in cyclic loading conditions10.1002/adem.202201189 ↗
8. A new auxetic structure with significantly reduced stress concentration effects10.1016/j.matdes.2019.107779 ↗
9. A design framework for gradually stiffer mechanical metamaterial induced by negative poisson’s ratio property10.1016/j.matdes.2020.108751 ↗
10. Large deformations of soft metamaterials fabricated by 3D printing10.1016/j.matdes.2017.06.002 ↗
11. Metamaterial boat fenders with supreme shape recovery and energy absorption/dissipation via FFF 4D printing10.1088/1361-665X/acedde ↗
12. A study of the functional capabilities of shape memory alloy-based 4D printed analogous bending actuators10.1007/s40964-023-00456-1 ↗
13. Energy absorption and mechanical performance of functionally graded soft–hard lattice structures10.3390/ma14061366 ↗
14. Shape memory meta-laminar jamming actuators by 4D printing10.1002/9783527617050 ↗
15. 4D printing of porous PLA-TPU structures: effect of applied deformation, loading mode and in fi ll pattern on the shape memory performance10.1088/1402-4896/ad1957 ↗
16. Shape recovery properties of 3D printed re-entrant strip using shape memory thermoplastic polyurethane filaments with various temperature conditions10.1186/s40691-023-00348-6 ↗
17. 3D printing of PLA-TPU with different component ratios: fracture toughness, mechanical properties, and morphology10.1016/j.jmrt.2022.11.024 ↗
18. 4D printing of PLA-TPU blends: effect of PLA concentration, loading mode, and programming temperature on the shape memory effect10.1007/s10853-023-08460-0 ↗
19. Design, simulation and experimental invetigation of 3d printed mechanical metamaterials
20. 4D printing of shape memory polylactic acid (PLA) components: investigating the role of the operational parameters in fused deposition modelling (FDM)10.1016/j.jmapro.2020.11.036 ↗
21. Experimental and finite element modeling of partial infill patterns for thermoplastic polymer extrusion 3D printed material using elasto-plastic method10.1063/5.0014978 ↗
22. Standard test method for plastics: dynamic mechanical properties: in tension10.1520/D5026-15.1 ↗
23. Identifying design parameters controlling damage behaviors of continuous fiber-reinforced thermoplastic composites using micromechanics as a virtual testing tool10.1016/j.ijsolstr.2017.03.026 ↗
24. Energy and variational methods in applied mechanics10.1016/0307-904x(85)90131-3 ↗
25. Eco-friendly TPU/PLA blends for application as shape-memory 3D printing filaments10.1007/s10924-023-02799-w ↗
26. Plastics engineering10.1353/imag.2003.0244 ↗
27. Mazurek-budzy · 201910.1007/978-3-319-95987-0_18 ↗
28. Shape fixity and shape recovery in a film of shape memory polymer of polyurethane series10.1177/1045389X9800900206 ↗
29. 4D printing of shape memory polylactic acid (PLA)10.1016/j.polymer.2021.124080 ↗
30. High cycle-life shape memory polymer at high temperature10.1038/srep33610 ↗
31. Synthesis and shape memory effects of Si-O-Si cross-linked hybrid polyurethanes10.1016/j.polymer.2005.11.035 ↗
32. Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds10.1016/j.jmbbm.2015.11.036 ↗
33. Fusedly deposited frequency-selective composites fabricated by a dual-nozzle 3D printing as microwave filter10.3390/polym16060786 ↗