journal article·2021-07-01

Vibration isolation concept by switchable stiffness on a semi-active pneumatic actuator

Grzegorz Mikułowski

Smart Materials and Structures· Volume 30· Issue 7
Publisher page

Abstract

Abstract In this paper a novel technique of switchable stiffness dedicated to vibration isolation is presented. The approach utilises a semi-active pneumatic device in which the stiffness switching is obtained via controlled thermodynamic processes. The concept for the dissipation technique is introduced and a mathematical model is proposed. The system is analysed under passive and semi-active modes of operation by means of numerical simulation and in an experimental survey. The analysis consists of the model validation, an energy dissipation process study and a verification of effectiveness of the concept under varying operational conditions. As a result, it is demonstrated that the proposed technique allows for combining advantages of controllable pneumatic springs and pneumatic dampers, which constitutes an added value. It is revealed in the conducted tests that the system allows for 147% increase in energy dissipation per vibration cycle and reduce the resonant amplitude peak by 8%, both in comparison to a passive gas damper. The presented concept introduces an innovative approach to the switching stiffness techniques dedicated to vibration mitigation. The findings may significantly expand the number of their implementation possibilities.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration Control and Rheological Fluids · Innovative Energy Harvesting Technologies · Hydraulic and Pneumatic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. An active truss element and control law for vibration suppression10.1088/0964-1726/4/4/006 ↗
2. Review on the use of piezoelectric materials for active vibration, noise and flow control10.1088/1361-665X/ab7541 ↗
3. Identification-based predictive control of semi-active shock-absorbers for adaptive dynamic excitation mitigation10.1007/s11012-020-01239-6 ↗
4. Mitigation of forced vibrations by semi-active control of local transfer moments10.1016/j.ymssp.2021.107733 ↗
5. Response of large space structures with stiffness control10.2514/3.25681 ↗
6. A new variable stiffness suspension system: passive case10.5194/ms-4-139-2013 ↗
7. Variable stiffness type magnetic vibration absorber to control the vibration of beam structure10.1177/1077546313481237 ↗
8. A variable stiffness device selection and design tool for lightly damped structures10.1016/j.jsv.2004.11.022 ↗
9. Vibration suppression by variable-stiffness members10.2514/3.59943 ↗
10. Shock isolation using an isolator with switchable stiffness10.1016/j.jsv.2010.09.016 ↗
11. A concept for semi-active vibration control with a serial-stiffness-switch system10.1016/j.jsv.2017.06.007 ↗
12. Active, passive and semi-active vibration suppression by stiffness variation10.2514/3.48978 ↗
13. Mathematical modeling of a transient vibration control strategy using a switchable mass stiffness compound system10.1155/2014/565181 ↗
14. Vibration isolation by a variable stiffness and damping system10.1299/jsmec.48.305 ↗
15. Vibration control with state-switched piezoelectric materials10.1106/18CE-77K4-DYMG-RKBB ↗
16. Development of the smart spring for active vibration control of helicopter blades10.1177/1045389X04039655 ↗
17. Variable damping and stiffness vibration control with magnetorheological fluid dampers for two degree-of-freedom system10.1299/jsmec.49.156 ↗
18. An experimental switchable stiffness device for shock isolation10.1016/j.jsv.2012.06.010 ↗
19. Dynamically tuned magnetostrictive spring with electrically controlled stiffness10.1088/0964-1726/25/3/035007 ↗
20. Variable stiffness Mckibben muscles with hydraulic and pneumatic operating modes10.1080/01691864.2016.1154801 ↗
21. Static and dynamic stability of pneumatic vibration isolators and systems of isolators10.1016/j.jsv.2013.06.034 ↗
22. Unbalanced machinery vibration isolation with a semi-active pneumatic suspension10.1016/j.jsv.2009.09.001 ↗
23. Modelling and analysis of dual-chamber pneumatic spring with adjustable damping for precision vibration isolation10.1016/j.jsv.2011.03.005 ↗
24. Pesik · 2016
25. A magnetorheological fluid embedded pneumatic vibration isolator allowing independently adjustable stiffness and damping10.1088/0964-1726/20/8/085025 ↗
26. Semi-active damping strategy for beams system with pneumatically controlled granular structure10.1016/j.ymssp.2015.09.026 ↗
27. Research and analysis of quazi-zero-stiffness isolator with geometric non-linear damping10.1155/2017/6719054 ↗
28. Active pneumatic vibration isolation system using negative stiffness structures for a vehicle seat10.1016/j.jsv.2013.10.027 ↗
29. Numerical and experimental analysis of a vibration isolator equipped with a negative stiffness system10.1016/j.jsv.2017.11.006 ↗
30. Mikułowski · 2013
31. Characterization of a piezoelectric valve for an adaptive pneumatic shock absorber10.1088/0964-1726/22/12/125011 ↗
32. Pneumatic adaptive absorber: mathematical modelling with experimental verification10.1155/2016/7074206 ↗
33. Boles · 1994
34. Sonntag · 1965
35. Generalisation and optimisation of semi-active, on-off switching controllers for single degree-of-freedom systems10.1016/j.jsv.2009.12.011 ↗