journal article·2024-02-01Open access

Inkjet printing P(VDF-TrFE-CTFE) actuators for large bending strains

S A Sekar, A Hunt

Smart Materials and Structures· Volume 33· Issue 2

Abstract

Abstract Additive manufacturing of sensors and actuators together with structural materials and electronics will make it possible to fabricate innovative system designs that are overly laborious to realise with conventional methods. While printing of the structural materials and electronics are advancing fast, the additive manufacturing methods for actuators and sensors are in an earlier stage of development. This research will develop a manufacturing process for entirely inkjet printed electroactive polymer (EAP) actuators basing on the P(VDF-TrFE-CTFE) relaxor ferroelectric polymer and Ag electrodes. The process consists of (1) printing an Ag layer on a polyethylene terephthalate (PET) substrate for the bottom electrode; (2) formulating, printing and annealing a P(VDF-TrFE-CTFE) ink for the EAP layer; and (3) printing and sintering an Ag layer on the plasma-treated EAP surface to form the top electrode. Two actuator variations, addressed as DMC and KM512, are manufactured and characterised by their: (a) response to quasi-static excitation (1 Hz sine wave); (b) hysteresis behaviour; (c) actuation amplitude variation with the input voltage; and (d) frequency response. The 18 mm long actuators showed 91.4 µm (DMC, 200 {V}pp) and 224 µm (KM512, 275 {V}pp) deflections in response to 1 Hz sinusoidal excitation, and 1.10 mm (DMC, 113 Hz, 200 {V}pp) and 1.72 mm (KM512, 114 Hz, 200 {V}pp) deflections in resonant operation. It is 55% more quasi-static strain and 470% more resonant strain than in earlier fully inkjet-printed polyvinylidene fluoride (PVDF) -based actuators, and comparable to similar partially inkjet-printed actuators. This is the first time that inkjet printing of all three layers of a relaxor ferroelectric actuator have been achieved.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
2. 3D-printing and advanced manufacturing for electronics10.1007/s40964-019-00077-7 ↗
3. 3D printed electronics: processes, materials and future trends10.1016/j.pmatsci.2022.100945 ↗
4. Additive manufacturing of smart polymeric composites: literature review and future perspectives10.1002/pc.26948 ↗
5. Recent advances in the 3D printing of ionic electroactive polymers and core ionomeric materials10.1039/D1PY01297E ↗
6. A review of recent manufacturing technologies for sustainable soft actuators10.1007/s40684-023-00533-4 ↗
7. All inkjet-printed piezoelectric electronic devices: energy generators, sensors and actuators10.1039/C7TC02558K ↗
8. A review on polyjet 3D printing of polymers and multi-material structures10.1177/09544062221079506 ↗
9. 3D printing applications in manufacturing: stratasys direct
10. All-polymer capacitor fabricated with inkjet printing technique10.1016/S0038-1101(03)00082-0 ↗
11. Challenges, prospects and emerging applications of inkjet-printed electronics: a chemist’s point of view10.1002/anie.202200166 ↗
12. A review on inkjet printing of nanoparticle inks for flexible electronics10.1039/C9TC01630A ↗
13. An all-inkjet printed bending actuator with embedded sensing feature and an electromagnetic driving mechanism10.3390/act5030021 ↗
14. Inkjet printable actuators and sensors for soft-bodied crawling robots
15. Inkjet printing of functional and structural materials: fluid property requirements, feature stability and resolution10.1146/annurev-matsci-070909-104502 ↗
16. Towards inkjet printable conducting polymer artificial muscles10.1016/j.snb.2016.01.142 ↗
17. Tailoring inkjet-printed PEDOT:PSS composition toward green, wearable device fabrication10.1063/5.0117278 ↗
18. Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks10.1016/j.snb.2017.11.147 ↗
19. Piezoelectric actuators employing PVDF coated with flexible PEDOT-PSS polymer electrodes10.1109/TDEI.2006.247842 ↗
20. Method for inkjet-printing PEDOT:PSS polymer electrode arrays on piezoelectric PVDF-TrFE fibers10.1109/JSEN.2021.3071321 ↗
21. Inkjet printing of high molecular weight PVDF-TrFE for flexible electronics10.1088/2058-8585/1/1/015001 ↗
22. Enhanced pseudo-piezoelectric dynamic force sensors based on inkjet-printed electrostrictive terpolymer10.1016/j.orgel.2019.01.028 ↗
23. Piezoelectric P(VDF-TrFE) film inkjet printed on silicon for high-frequency ultrasound applications10.1063/5.0048444 ↗
24. Inkjet-printed flexible piezoelectric sensor for self-powered biomedical monitoring10.1016/j.mtelec.2023.100056 ↗
25. Controlled poling of a fully printed piezoelectric PVDF-TrFE device as a multifunctional platform with inkjet-printed silver electrodes10.1039/D2TC01913B ↗
26. P(VDF-TrFE-CTFE) actuators with inkjet printed electrodes10.1109/ICCMA46720.2019.8988745 ↗
27. Printing electrodes for P(VDF-TrFE-CTFE) actuators using a consumer-grade inkjet printer10.1117/12.2660469 ↗
28. Inkjet printing of electroactive polymer actuators on polymer substrates10.1117/12.878873 ↗
29. All inkjet-printed piezoelectric polymer actuators: characterization and applications for micropumps in lab-on-a-chip systems10.1016/j.orgel.2013.09.009 ↗
30. A review of piezoelectric polymers as functional materials for electromechanical transducers10.1088/0964-1726/23/3/033001 ↗
31. Electrostrictive poly(vinylidene fluoride-trifluoroethylene) copolymers10.1016/S0924-4247(01)00496-4 ↗
32. Techincal data sheet solvene 200 EAP pp
33. Relaxor fluorinated polymers: novel applications and recent developments10.1109/TDEI.2010.5539681 ↗
34. Techincal guide piezotech RT-TS pp
35. NoveleTM IJ-220 printed electronics substrate - inkjet receptive p 1
36. NBSIJ-MU01 (silver nano particle ink) safety data sheet pp
37. Metalon® JS-A211 nanosilver ink - aqueous dispersion for inkjet printing
38. Specifications- pixdro lp50
39. FUJIFILM group’s inkjet printhead and technology pp
40. Specifications - Konica Minolta KM512 series
41. Benchmarking of inkjet printing methods for combined throughput and performance10.1002/adem.202000679 ↗
42. Minimal size of coffee ring structure10.1021/jp912190v ↗
43. Hutchings · 201310.1002/9781118452943 ↗
44. Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors10.1063/1.1888026 ↗
45. Influence of fluid physical properties on ink-jet printability10.1021/la900059m ↗
46. Ink jet printing of PZT thin films for MEMS
47. Ink jet deposition of ceramic suspensions: modeling and experiments of droplet formation10.1557/PROC-625-117 ↗
48. Experimental study of the parameters for stable drop-on-demand inkjet performance10.1063/1.5085868 ↗
49. Improving ferro- and piezo- electric properties of hydrogenized poly(vinylidene fluoride-trifluoroethylene) films by annealing at elevated temperatures10.1007/s10118-016-1782-8 ↗
50. Optimization of PVDF-TrFE processing conditions for the fabrication of organic mems resonators10.1038/srep19426 ↗
51. Enhanced ferroelectric property of P(VDF-TrFE-CTFE) film using room-temperature crystallization for high-performance ferroelectric device applications10.1002/aelm.201600225 ↗
52. Oxygen and nitrogen plasma hydrophilization and hydrophobic recovery of polymers10.1063/1.3673251 ↗
53. Silver nanoparticle ink technology: state of the art10.2147/NSA.S68080 ↗
54. Dynamic performance of unimorph piezoelectric bending actuators10.1177/0959651814552810 ↗
55. Performance analysis of piezoelectric cantilever bending actuators10.1080/00150199808229562 ↗