Development of a novel strategy based on in-process compensation of charge leakage for static force measurement by piezoelectric force sensors
Source abstract
Abstract
Abstract Ordinary piezoelectric force sensors are only capable of measuring dynamic forces but not static forces because of the charge leakage due to the finite resistance of piezoelectric materials and charge amplifiers. This paper presents a new strategy for in-process compensation of charge leakage for force measurement with wide spectrum from static to dynamic realized by piezoelectric force sensors. The compensation is in-process operated based on the concept of dynamic accumulation. In order to improve the measurement accuracy and long-term stability by the compensation, the zero offset generated by normalization, bias current and temperature drift are all theoretically analyzed and experimentally validated. Measurement experiments of four different types of force signals, which contain static, triangular, sinusoidal and random force signals acting on the piezoelectric force sensor, are conducted to validate the proposed strategy. In addition, the effect of different time constant of the piezoelectric sensor under different applied forces on the compensated results is analyzed. Performance tests containing accuracy, resolution, span and bandwidth have been conducted. It is validated that the proposed method has high sensitivity of sub-millinewton, long-term stability and wide spectrum from static signal to dynamic measurement capabilities, which would provide an effective and precise method for micro force measurement and control in ultra-precision machining, semiconductor industry and biomechanics fields.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced Sensor Technologies Research · Advanced MEMS and NEMS Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Simultaneous clamping and cutting force measurements with built-in sensors10.3390/s20133736 ↗
2. Auto-tracking single point diamond cutting on non-planar brittle material substrates by a high-rigidity force controlled fast tool servo10.1016/j.precisioneng.2017.02.014 ↗
3. Development of a shear-type dynamometer for high-temperature environment10.1109/JSEN.2022.3192008 ↗
4. Recent advances in micro/nano-cutting: effect of tool edge and material properties10.1007/s41871-018-0005-z ↗
5. Measurement technologies for precision positioning10.1016/j.cirp.2015.05.009 ↗
6. An in-situ, micro-mechanical setup with accurate, tri-axial, piezoelectric force sensing and positioning10.1007/s11340-020-00583-8 ↗
7. Self-powered wearable piezoelectric sensors based on polymer nanofiber–metal–organic framework nanoparticle composites for arterial pulse monitoring10.1021/acsanm.0c01551 ↗
8. Three-dimensional piezoelectric polymer microsystems for vibrational energy harvesting, robotic interfaces and biomedical implants10.1038/s41928-018-0189-7 ↗
9. Thermal-variation insensitive force-touch sensing system using transparent piezoelectric thin-film10.1109/JSEN.2018.2839356 ↗
10. Piezoelectric energy harvesting solutions: a review10.3390/s20123512 ↗
11. Gao · 2017
12. A differential strategy for measurement of a static force in a single-point diamond cutting by a force-controlled fast tool servo10.1088/1361-6501/ab7d6f ↗
13. Static force measurement using piezoelectric sensors10.1155/2021/6664200 ↗
14. Three-axial cutting force measurement in micro/nano-cutting by utilizing a fast tool servo with a smart tool holder10.1016/j.cirp.2021.04.069 ↗
15. Feeling machines for online detection and compensation of tool deflection in milling10.1016/j.cirp.2018.04.110 ↗
16. Design and analysis of a strain gauge based eight-shaped elliptical ring dynamometer for milling force measurement10.1177/0954406220967681 ↗
17. Oscillator Circuits
18. Triaxis static force sensing for Langevin-type ultrasonic tools using lead-zirconate-titanate ceramic rings10.1109/JSEN.2021.3107309 ↗
19. Static force measurement for automation assembly systems10.1016/j.sna.2012.09.001 ↗
20. Force measuring system employing piezo-capacitors
21. Static force measurement by piezoelectric sensors10.1109/ISCAS.2006.1693799 ↗
22. Development of a commercially viable piezoelectric force sensor system for static force measurement10.1088/1361-6501/aa7dc0 ↗
23. A novel numerical integrator for velocity and position estimation10.1177/0142331213476987 ↗
24. Development of an optimized three-axis fast tool servo for ultraprecision cutting10.1109/TMECH.2021.3109696 ↗
25. The Shannon sampling theorem-its various extensions and applications: a tutorial review10.1109/PROC.1977.10771 ↗
26. Kistler · 2023
27. Design of an innovative smart turning tool with application to real-time cutting force measurement10.1177/0954405414530907 ↗