journal article·2023-07-01Open access

Monitoring of soil water content using spherical smart aggregates based on electromechanical impedance (EMI) technique

Chengming Lan, Shuo Zhuang, Song Han, Jianjun Wang, Weijie Li

Smart Materials and Structures· Volume 32· Issue 7

Abstract

Abstract Real-time monitoring of soil water content is of great significance to prevent many engineering accidents, such as landslide, water seepage of foundation dam, and reduction of foundation bearing capacity. Electromechanical impedance (EMI) technique based smart aggregates (SAs) have showed excellent monitoring capability in various engineering applications. However, there are limited reports on the application of EMI based SAs in the monitoring of the soil water content. In this paper, the EMI based spherical SAs (SSAs) were investigated in the monitoring of soil water content. Firstly, the SSAs were designed and fabricated using the monolithic concrete encapsulation method, and their stable performance in air were evaluated, and confirmed by testing and analyzing the impedance spectrum. Then, the fabricated SSAs were immersed in the water environment for 28 d to ensure the stability under the working conditions, such as the soil with high water content and the hydration process of early-age concrete. Secondly, the monitoring experiments of soil water content were carried out based on the SSAs and the traditional SAs using the EMI technique. The measured impedance signatures under different water contents in soil were quantified by three types of statistical indexes, including root mean square deviation, mean absolute percentage deviation, and correlation coefficient deviation. The experimental results show that compared with the traditional SAs, the SSAs are more sensitive and stable to monitor the soil water content. Finally, the effect of temperature on the performance of SSA based on the EMI technique were conducted experimentally. The results demonstrate that temperature has influence on the monitoring results of the SSAs based on the EMI technique.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geophysical Methods and Applications · Geophysical and Geoelectrical Methods · Soil Moisture and Remote Sensing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. Monitoring of drying-induced soil moisture loss with PZT-based EMI technique10.1177/1045389X211072234 ↗
2. Relationships among remotely sensed soil moisture, precipitation and landslide events10.1007/s11069-006-9095-9 ↗
3. Slope stability analysis on a regional scale using GIS: a case study from Dhading, Nepal10.1007/s00254-008-1435-5 ↗
4. Analysis of rainfall-induced debris flows10.1061/(ASCE)0733-9410(1995)121:7(544) ↗
5. Landslide triggering by rain infiltration10.1029/2000WR900090 ↗
6. Modeling soil shrinkage curve across a wide range of soil types10.2136/sssaj2004.0146 ↗
7. Some aspects of soil shrinkage and the effect of cracking upon water entry into the soil10.1071/AR9540279 ↗
8. The effects of water content variation on adhesion factor of pile foundation in expansive soil10.9744/CED.15.2.114-119 ↗
9. Laboratory test of capacitive sensor for monitoring sandy soil water content10.3969/j.issn.2095-0373.2002.02.004 ↗
10. The gravimetric method of soil moisture determination part I a study of equipment, and methodological problems10.1016/0022-1694(70)90066-1 ↗
11. Empirical evaluation of the relationship between soil dielectric constant and volumetric water content as the basis for calibrating soil moisture measurements by TDR10.1111/j.1365-2389.1992.tb00115.x ↗
12. Measurement of soil water content using time-domain reflectrometry (TDR): a field evaluation10.2136/sssaj1985.03615995004900010003x ↗
13. Soil moisture distribution patterns under surface and subsurface drip irrigation systems in sandy soil using neutron scattering technique10.1007/s00271-011-0306-0 ↗
14. Advances in suction measurements using high suction tensiometers10.1016/j.enggeo.2012.04.013 ↗
15. Electrical resistivity survey in soil science: a review10.1016/j.still.2004.10.004 ↗
16. Spatial and temporal monitoring of soil moisture using surface electrical resistivity tomography in Mediterranean soils10.1016/j.catena.2017.06.001 ↗
17. A method of measuring soil moisture by time-domain reflectometry10.1016/0022-1694(86)90097-1 ↗
18. Determination of soil moisture by neutron scattreing10.1097/00010694-195205000-00007 ↗
19. A new instrument for the measurement of soil moisture suction10.1680/geot.1993.43.2.321 ↗
20. Laboratory characterization of sandy soil water content during drying process using electrical resistivity/resistance method (ERM)10.1007/s10064-020-01805-y ↗
21. A critical review of soil moisture measurement10.1016/j.measurement.2014.04.007 ↗
22. Measurement of volumetric water content by TDR in saline soils10.1111/j.1365-2389.1997.tb00555.x ↗
23. Field simulation of in situ water content and temperature changes due to ground–atmospheric interactions10.1680/geot.2005.55.7.557 ↗
24. A spherical smart aggregate sensor based electro-mechanical impedance method for quantitative damage evaluation of concrete10.1177/1475921719888963 ↗
25. Early-age strength monitoring of the recycled aggregate concrete using the EMI method10.1088/1361-665X/abf421 ↗
26. A PZT-based electromechanical impedance method for monitoring the soil freeze-thaw process10.3390/s19051107 ↗
27. An embeddable spherical smart aggregate for monitoring concrete hydration in very early age based on electromechanical impedance method10.1177/1045389X20963175 ↗
28. Electro-mechanical impedance (EMI) based interlayer slide detection using piezoceramic smart aggregates-a feasibility study10.3390/s18103524 ↗
29. Smart PZT-embedded sensors for impedance monitoring in prestressed concrete anchorage10.3390/s21237918 ↗
30. Mechanical impedance based embedded piezoelectric transducer for reinforced concrete structural impact damage detection: a comparative study10.1016/j.conbuildmat.2018.01.039 ↗
31. Numerical and experimental investigation of electro-mechanical impedance based concrete quantitative damage assessment10.1088/1361-665X/ab58e9 ↗
32. Structural health monitoring and interface damage detection for infill reinforced concrete walls in seismic retrofit of reinforced concrete frames using piezoceramic-based transducers under the cyclic loading10.3390/app9020312 ↗
33. Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review10.1088/0964-1726/17/3/033001 ↗
34. Concrete early-age strength monitoring using embedded piezoelectric transducers10.1088/0964-1726/15/6/038 ↗
35. A novel embeddable tubular piezoceramics-based smart aggregate for damage detection in two-dimensional concrete structures10.3390/s19071501 ↗
36. A novel embeddable spherical smart aggregate for structural health monitoring: part I. Fabrication and electrical characterization10.1088/1361-665X/aa80ef ↗
37. Analysis on an improved resistance tuning type multi-frequency piezoelectric spherical transducer10.12989/sss.2019.24.4.435 ↗
38. Piezoceramic smart aggregates for active monitoring of reinforced concrete structures10.2991/978-94-6239-157-4_9 ↗
39. Progressive collapse of a two-story reinforced concrete frame with embedded smart aggregates10.1088/0964-1726/18/7/075001 ↗
40. Multi-functional smart aggregate-based structural health monitoring of circular reinforced concrete columns subjected to seismic excitations10.1088/0964-1726/19/6/065026 ↗
41. Estimation of impact location on concrete column10.1088/1361-665X/aa6768 ↗
42. Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates10.1088/0964-1726/22/8/085025 ↗
43. Monitoring the soil freeze-thaw process using piezoceramic-based smart aggregate10.1061/(ASCE)CR.1943-5495.0000066 ↗
44. An embedded tubular PZT transducer based damage imaging method for two-dimensional concrete structures10.1109/ACCESS.2018.2843788 ↗
45. Smart concrete slabs with embedded tubular PZT transducers for damage detection10.1088/1361-665X/aa9c72 ↗
46. A novel embeddable spherical smart aggregate for structural health monitoring: part II. Numerical and experimental verifications10.1088/1361-665X/aa80ef ↗
47. Development of a low-cost multifunctional wireless impedance sensor node10.12989/sss.2010.6.5_6.689 ↗
48. Monitoring of liquid viscosity for viscous dampers through a wireless impedance measurement system10.3390/app12010189 ↗
49. Quantitative corrosion monitoring using wireless electromechanical impedance measurements10.1080/09349847.2010.493991 ↗
50. Miniature piezoelectric hollow sphere transducers (BBs)10.1109/58.655632 ↗
51. A theoretical model for designing the novel embeddable spherical smart aggregate10.1109/ACCESS.2018.2851454 ↗
52. Crack detection in rectangular plate by electromechanical impedance method: modeling and experiment10.12989/sss.2017.19.4.361 ↗
53. Damage detection and characterization using EMI technique under varying axial load10.12989/sss.2013.11.4.349 ↗
54. An electromechanical impedance-based method for tensile force estimation and damage diagnosis of post-tensioning systems10.12989/sss.2016.17.1.107 ↗
55. Modeling and electromechanical performance of improved smart aggregates using piezoelectric stacks10.1088/1361-6463/aca6f6 ↗
56. Monitoring of cylindrical plunge grinding process by electromechanical impedance10.1109/JSEN.2022.3172230 ↗
57. Aging of solid propellants investigated by electromechanical impedance technique10.2514/1.B37777 ↗
58. Real-time monitoring of water content in sandy soil using shear mode piezoceramic transducers and active sensing—a feasibility study10.3390/s17102395 ↗
59. Effects of moulding water content on the stress-strain behaviour of a compacted silty sand10.3208/sandf.44.2_85 ↗
60. Shear strength equations for unsaturated soil under drying and wetting10.1061/(ASCE)GT.1943-5606.0000261 ↗
61. Predicting shear strength of unsaturated soils over wide suction range10.1061/(ASCE)GM.1943-5622.0001555 ↗
62. An experimental research on damping ratio and dynamic shear modulus ratio of frozen silty clay of the Qinghai-Tibet engineering corridor10.1016/j.trgeo.2019.100269 ↗
63. Recent advancements in the electromechanical (E/M) impedance method for structural health monitoring and NDE10.1117/12.316923 ↗
64. Monitoring of the strength gain of concrete using embedded PZT impedance transducer10.1016/j.conbuildmat.2011.04.020 ↗
65. A study of concrete slab damage detection based on the electromechanical impedance method10.3390/s141019897 ↗
66. Analytical impedance model for piezoelectric-based smart Strand and its feasibility for prestress force prediction10.1002/stc.3061 ↗
67. Damage identification using piezoelectric electromechanical impedance: a brief review from a numerical framework perspective10.1016/j.istruc.2023.03.017 ↗
68. Impedance based damage assessment of concrete under the combined effect of impact and temperature using different piezo configurations10.1016/j.sna.2022.113763 ↗
69. Identification of minor structural damage based on electromechanical impedance sensitivity and sparse regularization10.1061/(ASCE)AS.1943-5525.0000892 ↗
70. An electromechanical impedance-instrumented corrosion-measuring probe10.1177/1045389X19861776 ↗
71. A deep learning approach for electromechanical impedance based concrete structural damage quantification using two-dimensional convolutional neural network10.1016/j.ymssp.2022.109634 ↗
72. Monitoring of the load-induced RC beam structural tension/compression stress and damage using piezoelectric transducers10.1016/j.engstruct.2017.10.046 ↗
73. A novel electromechanical impedance-based method for non-destructive evaluation of concrete fiber content10.1016/j.conbuildmat.2022.128972 ↗
74. Overview of piezoelectric impedance-based health monitoring and path forward10.1177/05831024030356001 ↗
75. A review of the piezoelectric electromechanical impedance based structural health monitoring technique for engineering structures10.3390/s18051307 ↗
76. A cost-effective impedance-based structural health monitoring technique for steel structures by monitoring multiple areas10.1177/1045389X16645866 ↗
77. History data free piezoelectric based non-destructive testing technique for debonding detection of composite structures10.1016/j.compstruct.2019.111225 ↗
78. Low cost technique for detecting adhesive debonding damage of glass epoxy composite plate using an impedance based non-destructive testing method10.1016/j.compstruct.2018.01.053 ↗
79. Design and performance evaluation of electromechanical impedance instrumented quantitative corrosion measuring probe based on conical rods10.1088/1361-665X/ac9baa ↗
80. Impedance-based structural health monitoring with artificial neural networks10.1106/H0EV-7PWM-QYHW-E7VF ↗
81. Electromechanical impedance-based concrete structural damage detection using principal component analysis incorporated with neural network10.1177/1045389X221077440 ↗
82. Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks10.1016/j.engstruct.2013.05.025 ↗
83. Shear loading detection of through bolts in bridge structures using a percussion-based one-dimensional memory-augmented convolutional neural network10.1111/mice.12602 ↗
84. Health monitoring strategy based on PZT sensors and convolutional neural network10.3390/s18092955 ↗
85. Early-age concrete strength monitoring using smart aggregate based on electromechanical impedance and machine learning10.1016/j.ymssp.2022.109865 ↗
86. Intelligent monitoring and assessment on early-age hydration and setting of cement mortar through an EMI-integrated neural network10.1016/j.measurement.2022.111984 ↗
87. 1D-CNN-based damage identification method based on piezoelectric impedance using adjustable inductive shunt circuitry for data enrichment10.1177/14759217211049720 ↗
88. Pitting corrosion prediction based on electromechanical impedance and convolutional neural networks10.1177/14759217221109944 ↗
89. Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity10.1016/j.engstruct.2012.01.012 ↗
90. Impedance-based structural health monitoring using neural networks for autonomous frequency range selection10.1088/0964-1726/19/12/125011 ↗
91. Automated identification of compressive stress and damage in concrete specimen using convolutional neural network learned electromechanical admittance10.1016/j.engstruct.2022.114176 ↗
92. Convolutional neural network and impedance-based SHM applied to damage detection10.1088/2631-8695/abb568 ↗