journal article·2024-04-01

Harnessing multi-stable piezoelectric systems for enhanced wind energy harvesting

Xiaohui Liu, Yan Tao, Hexuan Jia, Fuhong Dai

Smart Materials and Structures· Volume 33· Issue 4
Publisher page

Abstract

Abstract With the ongoing evolution of microelectronic devices toward lower power consumption, the utilization of piezoelectric materials for energy harvesting from wind-induced vibrations has garnered considerable attention. This study employs a combined approach involving finite element analysis and experiments to investigate the energy harvesting efficiency of the multi-stable piezoelectric wind energy harvester (MPWEH) and compares its performance with two alternative systems. The MPWEH demonstrates higher strains in both the x and y directions during reciprocating cross-well vibrations, establishing its superior energy harvesting efficiency compared to the alternative systems. Notably, at a wind speed of 8 m s−1, the MPWEH generates an output power nearly six times higher than local bistable piezoelectric energy harvester (LBPEH). The MPWEH achieves the maximum power density of 9.8125 mW cm−3, whereas the LBPEH registers the power density of 1.625 mW cm−3. The experimental results indicate that, under the optimal load resistance of 40 kΩ and a wind speed of 14 m s−1, the MPWEH achieves a peak output power of 2.76 mW, with a power density of 17.25 mW cm−3. The versatile applicability of the MPWEH extends across various low-power consumption microelectronic devices, positioning it as a valuable candidate for empowering continuous monitoring sensors in diverse domains.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Energy Harvesting in Wireless Networks · Wireless Power Transfer Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Energy harvesting in wireless sensor networks: a taxonomic survey10.1002/er.5816 ↗
2. Energy harvesting techniques for internet of things (IoT)10.1109/ACCESS.2021.3064066 ↗
3. Global optimisation approach for designing high-efficiency piezoelectric beam-based energy harvesting devices10.1016/j.nanoen.2021.106684 ↗
4. A novel damage index integrating piezoelectric impedance and ultrasonic guided wave for damage monitoring of bolted joints10.1177/14759217231159427 ↗
5. Annual energy production estimation for variable-speed wind turbine at high-altitude site10.35833/MPCE.2019.000240 ↗
6. A review of piezoelectric energy harvesters for harvesting wind energy10.1016/j.sna.2023.114190 ↗
7. Flutter-driven triboelectrification for harvesting wind energy10.1038/ncomms5929 ↗
8. An in-plane omnidirectional flutter piezoelectric wind energy harvester10.1016/j.ymssp.2023.110637 ↗
9. Enhanced performance of airfoil-based piezoaeroelastic energy harvester: numerical simulation and experimental verification10.1016/j.ymssp.2021.108065 ↗
10. Harvesting low-speed wind energy by bistable snap-through and amplified inertial force10.1016/j.energy.2023.129330 ↗
11. Dynamic modeling and analysis of a tristable vortex-induced vibration energy harvester10.1016/j.ymssp.2022.109924 ↗
12. Optimum network configuration design of a multi-beam vortex-induced vibration piezoelectric energy harvester10.1016/j.ymssp.2022.109186 ↗
13. Comparative study of tip cross-sections for efficient galloping energy harvesting10.1063/1.4792737 ↗
14. Modeling and performance analysis of electromagnetic energy harvester based on torsional galloping phenomenon10.1016/j.ymssp.2023.110287 ↗
15. A comb-like beam based piezoelectric system for galloping energy harvesting10.1016/j.ymssp.2020.107301 ↗
16. A novel piezoelectric based wind energy harvester for low-power autonomous wind speed sensor
17. Numerical simulations of aeroelastic instabilities to optimize the performance of flutter-based electromagnetic energy harvesters10.1177/1045389X17711784 ↗
18. Wind energy harvesting using piezoelectric macro fiber composites based on flutter mode10.1016/j.mee.2020.111333 ↗
19. Modeling and testing of a novel aeroelastic flutter energy harvester10.1115/1.4002788 ↗
20. On the design of an electromagnetic aeroelastic energy harvester from nonlinear flutter10.1007/s11012-018-0875-6 ↗
21. An experimental analysis and parametric simulation of vibration-based piezo-aeroelastic energy harvesting using an aerodynamic wing profile10.1007/s13369-020-04373-1 ↗
22. Multistability phenomenon in signal processing, energy harvesting, composite structures, and metamaterials: a review10.1016/j.ymssp.2021.108419 ↗
23. Harvesting weak vibration energy by amplified inertial force and multi-stable buckling piezoelectric structure10.1016/j.ymssp.2023.110125 ↗
24. The influence of lay-up design on the performance of bi-stable piezoelectric energy harvester10.1016/j.compstruct.2016.11.026 ↗
25. Design and analysis of a broadband vibratory energy harvester using bi-stable piezoelectric composite laminate10.1016/j.enconman.2018.05.032 ↗
26. Analytical modeling of a device for vibration isolation and energy harvesting using simply-supported bi-stable hybrid symmetric laminate10.1016/j.coco.2023.101520 ↗
27. Transduction of a bistable inductive generator driven by white and exponentially correlated Gaussian noise10.1016/j.jsv.2010.12.005 ↗
28. Probabilistic behavior analysis of a sandwiched buckled beam under Gaussian white noise with energy harvesting perspectives10.1016/j.chaos.2016.09.016 ↗
29. Broadband tristable energy harvester: modeling and experiment verification10.1016/j.apenergy.2014.07.077 ↗
30. A piezomagnetoelastic structure for broadband vibration energy harvesting10.1063/1.3159815 ↗
31. Improve efficiency of harvesting wind energy by integrating bi-stability and swinging balls10.1016/j.ymssp.2022.108816 ↗
32. Vibrational energy harvesting by exploring structural benefits and nonlinear characteristics10.1016/j.cnsns.2016.12.026 ↗
33. Enhanced vibrational energy harvesting using nonlinear stochastic resonance10.1016/j.jsv.2008.07.017 ↗
34. Power capture performance of an oscillating-body WEC with nonlinear snap through PTO systems in irregular waves10.1016/j.apor.2015.06.012 ↗
35. Piezoelectric buckled beams for random vibration energy harvesting10.1088/0964-1726/21/3/035021 ↗
36. Energy harvesting in the super-harmonic frequency region of a twin-well oscillator10.1063/1.3684579 ↗
37. A piezoelectric energy harvester for broadband rotational excitation using buckled beam10.1063/1.5018077 ↗
38. Enhanced piezoelectric wind energy harvesting based on a buckled beam10.1063/1.4982967 ↗
39. A piezoelectric bistable plate for nonlinear broadband energy harvesting10.1063/1.3487780 ↗
40. Optimization of piezoelectric bistable composite plates for broadband vibrational energy harvesting10.1117/12.930138 ↗
41. Broadband vibration energy harvesting based on cantilevered piezoelectric bi-stable composites10.1063/1.4803918 ↗
42. Bistable hybrid symmetric laminates10.1016/j.compstruct.2014.05.030 ↗
43. Experimental investigation of broadband energy harvesting of a bi-stable composite piezoelectric plate10.1088/1361-665X/aa5b41 ↗
44. Wind-induced vibration behavior of bistable hybrid symmetric laminate10.1016/j.compstruct.2022.116126 ↗
45. Piezoelectric wind energy harvester of bi-stable hybrid symmetric laminates10.1016/j.compscitech.2023.110198 ↗
46. Dimensional reduction study of piezoelectric ceramics constitutive equations from 3-D to 2-D and 1-D10.1109/TUFFC.945 ↗
47. Relative performance of a vibratory energy harvester in mono-and bi-stable potentials10.1016/j.jsv.2011.07.031 ↗
48. Lattice-Boltzmann method for complex flows10.1146/annurev-fluid-121108-145519 ↗
49. A model for collision processes in gases. I. Small amplitude processes in charged and neutral one-component systems10.1103/PhysRev.94.511 ↗
50. Development of coupling technique for LBM and FEM for FSI application10.1108/02644400610707766 ↗