Design, fabrication, and testing of a low frequency MEMS piezoelectromagnetic energy harvester
Source abstract
Abstract
Abstract This paper details a power solution for smart grid applications to replace batteries by harvesting the electromagnetic energy from a current-carrying wire. A MEMS piezoelectromagnetic energy harvester has been fabricated using PZT screen-printing technology with a centrally-supported meandering geometry. The energy harvesting device employs a symmetric geometry to increase its power output by reducing the effects of the torsional modes and the resultant overall strain nodes in the system subsequently reduce the complexities for the electrode fabrication. The unit is modelled using COMSOL to determine mode shapes and frequency response functions. A 12.7 mm by 14.7 mm unit is fabricated by screen-printing 75 μ m-thick PZT on a stainless steel substrate and then experimentally tested to validate the FEA results. Experimentally, the harvester is shown to produce 9 μ W from a wire carrying 7 A while operating at a distance of 6.5 mm from the wire. The design of the current work results in a greater normalized power density than other MEMS based piezoelectromagnetic devices and shows great potential relative to larger devices that use bulk or thin film piezoelectrics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative Energy Harvesting Technologies · Energy Harvesting in Wireless Networks · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Survey of electromagnetic and magnetoelectric vibration energy harvesters for low frequency excitation10.1016/j.measurement.2016.07.074 ↗
2. Design of a MEMS passive, proximity-based AC electric current sensor for residential and commercial loads
3. Design, fabrication and temperature sensitivity testing of a miniature piezoelectric-based sensor for current measurements10.3390/act3030162 ↗
4. Energy scavenging power sources for household electrical monitoring
5. Design, modelling, fabrication & testing of a miniature piezoelectric-based EMF energy harvester
6. Electromechanical energy scavenging from current-carrying conductors10.1109/JSEN.2012.2211868 ↗
7. Energy harvesting from electric power lines employing the Halbach arrays10.1063/1.4825348 ↗
8. Piezoelectric and electromagnetic hybrid energy harvester for powering wireless sensor nodes in smart grid10.1007/s12206-015-0928-x ↗
9. Gas discrimination using screen-printed piezoelectric cantilevers coated with carbon nanotubes10.1016/j.snb.2016.07.163 ↗
10. Development of piezoelectric vibration energy harvesters for battery-less smart shoes
11. Screen printed PZT/PZT thick film bimorph MEMS cantilever device for vibration energy harvesting10.1016/j.sna.2011.12.035 ↗
12. Development of a compact, low-frequency vibration, piezoelectric MEMS energy harvester10.3390/proceedings1040588 ↗
13. A piezoelectric vibration based generator for wireless electronics10.1088/0964-1726/13/5/018 ↗
14. A low frequency MEMS energy harvester scavenging energy from magnetic field surrounding an AC current-carrying wire10.1088/1742-6596/757/1/012039 ↗
15. Modeling, fabrication, and experimental validation of hybrid piezo-magnetostrictive and piezomagnetic energy harvesting units10.1177/1045389X14538540 ↗
16. First experimental demonstration of a self-oscillating fluidic heat engine (SOFHE) with piezoelectric power generation10.1088/1742-6596/773/1/012039 ↗
17. Coupled out of plane vibrations of spiral beams for micro-scale applications10.1016/j.jsv.2010.07.013 ↗
18. Parametric study of zigzag microstructure for vibrational energy harvesting10.1109/JMEMS.2011.2171321 ↗
19. Modeling, design and fabrication of (10 × 10 × 4 mm3) MEMS AC energy scavenger for smart grid applications
20. Analytical modeling and experimental verification of the vibrations of the zigzag microstructure for energy harvesting10.1115/1.4002783 ↗
21. Comparative analysis of one-dimensional and two-dimensional cantilever piezoelectric energy harvesters10.1515/ehs-2014-0007 ↗
22. Low-frequency Zigzag energy harvesters operating in torsion-dominant mode10.1016/j.apenergy.2017.07.044 ↗
23. Two-dimensional concentrated-stress low-frequency piezoelectric vibration energy harvesters10.1063/1.4929844 ↗
24. Low-frequency meandering piezoelectric vibration energy harvester10.1109/TUFFC.2012.2269 ↗
25. Mode shape combination in a two-dimensional vibration energy harvester through mass loading structural modification10.1063/1.4958689 ↗
26. Permanent magnet micromotors on silicon substrates10.1109/84.232591 ↗
27. Modelling and fabrication of a compliant centrally supported meandering piezoelectric energy harvester using screenprinting technology10.1088/1742-6596/773/1/012109 ↗
28. AK Steel
29. K&J Magnetics
30. Etude de MEMS piézoélectriques libérés et microstructurés par sérigraphie.Application à la détection en milieu gazeux et en milieu liquide
31. One-step firing for electroded PZT thick films applied to MEMS10.1088/0964-1726/24/2/025020 ↗
32. Printed MEMS-based self–contained piezoelectric-based monitoring device for smart grids
33. Inman · 2014
34. The design, fabrication and evaluation of a MEMS PZT cantilever with an integrated Si proof mass for vibration energy harvesting10.1088/0960-1317/18/5/055017 ↗