Loading influence on the corrosion assessment during stress-induced martensite reorientation in nickel-titanium SMA
Source abstract
Abstract
Abstract The effect of stress-induced martensite reorientation on the corrosion behavior of a nickel-titanium (NiTi) shape memory alloy (SMA) was characterized by mechanical-electrochemical techniques. This martensite reorientation influenced the passive state of NiTi SMA. These passive to active state transitions could be sensed by the global interfacial electrochemical measurements, such as electrochemical impedance spectroscopy (EIS), open circuit potential (OCP) and linear polarization resistance (LPR) methods. The increase in the loading when exposed to a corrosive environment resulted in the breakdown of the passive layer. A later repassivation stage was reached due to the formation rate becoming more dominant than the breakdown rate during loading conditions. The integration of the mechanical loading by tensile testing, strain distribution by digital image correlation (DIC) and electrochemical methods by OCP and EIS, characterized and detected the influence of the mechanical effect in the corrosion assessment and interfacial mechanisms.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Lagoudas · 200810.1007/978-0-387-47685-8 ↗
2. Biomedical applications of shape memory alloys10.1155/2011/501483 ↗
3. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
4. Experimental and computational investigation of the effect of phase transformation on fracture parameters of an SMA10.1088/0964-1726/25/7/075010 ↗
5. Experimental and numerical investigation of the stable crack growth regime under pseudoelastic loading in shape memory alloys10.1117/12.2300902 ↗
6. Effect of environment on fatigue failure of controlled memory wire nickel-titanium rotary instruments10.1016/j.joen.2011.12.002 ↗
7. Corroded nitinol wires in explanted aortic endografts: an important mechanism of failure?10.1177/152660280100800303 ↗
8. Effect of environment on low-cycle fatigue of a nickel–titanium instrument10.1016/j.joen.2007.08.007 ↗
9. Low-cycle fatigue of rotary NiTi endodontic instruments in hypochlorite solution10.1016/j.dental.2007.09.004 ↗
10. Fatigue testing of controlled memory wire nickel-titanium rotary instruments10.1016/j.joen.2011.03.023 ↗
11. Thermomechanical transformation fatigue of TiNiCu SMA actuators under a corrosive environment—part I: experimental results10.1016/j.ijfatigue.2009.04.012 ↗
12. Fatigue life characterization of shape memory alloys undergoing thermomechanical cyclic loading10.1117/12.508207 ↗
13. Electrochemistry of NiTi wires/springs subjected to static/cyclic loadings10.1016/j.matpr.2015.07.442 ↗
14. Corrosion of NiTi wires with cracked oxide layer10.1007/s11665-014-0925-8 ↗
15. Thermomechanical characterization of NiTiCu and NiTi SMA actuators: influence of plastic strains10.1088/0964-1726/9/5/308 ↗
16. Comparison between open circuit and imposed potential measurements to evaluate the effect of temperature on galvanic corrosion of the pair alloy 31-welded alloy 31 in LiBr solutions10.1016/j.corsci.2008.09.011 ↗
17. Ferroelastic twin reorientation mechanisms in shape memory alloys elucidated with 3D x-ray microscopy10.1016/j.jmps.2018.12.003 ↗
18. Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in situ neutron diffraction10.1016/j.jmps.2013.05.008 ↗
19. Experimental and microstructural characterization of simultaneous creep, plasticity and phase transformation in Ti50Pd40Ni10 high-temperature shape memory alloy10.1016/j.actamat.2009.11.006 ↗
20. Coupling between martensitic phase transformations and plasticity: a microstructure-based finite element model10.1016/j.ijplas.2010.01.009 ↗
21. Crystal plasticity based constitutive model of NiTi shape memory alloy considering different mechanisms of inelastic deformation10.1016/j.ijplas.2013.08.012 ↗
22. Interpretation of open circuit potential of two titanium alloys for a long time immersion in physiological fluid
23. Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: a new approach10.1016/j.conbuildmat.2016.02.047 ↗
24. Electrochemical frequency modulation (EFM) technique: theory and recent practical applications in corrosion research10.1016/j.molliq.2017.11.006 ↗
25. Electrochemical frequency modulation as a new technique for monitoring corrosion inhibition of iron in acid media by new thiourea derivative10.1016/j.electacta.2005.09.018 ↗
26. Fracture toughness of NiTi–towards establishing standard test methods for phase transforming materials10.1016/j.actamat.2018.09.048 ↗
27. The use of physiological solutions or media in calcium phosphate synthesis and processing10.1016/j.actbio.2013.12.047 ↗
28. The mechanochemical behavior of type 316L stainless steel10.1016/0010-938X(96)00008-X ↗
29. Mechano-chemical effect of pipeline steel in microbiological corrosion10.1016/j.corsci.2016.03.011 ↗
30. Effect of temperature and chloride ion concentration on corrosion of passive films on nano/ultrafine grained stainless steels10.1007/s11665-014-1227-x ↗
31. Influence of an elastic stress on the conductivity of passive films10.1016/S0921-5093(00)01843-8 ↗
32. Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses10.1007/s10008-003-0470-0 ↗
33. The effect of tensile stresses on aluminium passive layer durability10.1016/j.electacta.2005.12.054 ↗
34. The corrosion and nickel release behavior of laser surface-melted NiTi shape memory alloy in Hanks’ solution10.1016/j.surfcoat.2004.06.033 ↗
35. Effect of surface treatment and sterilization processes on the corrosion behavior of NiTi shape memory alloy10.1002/1097-4636(20000915)51:4<685::AID-JBM17>3.0.CO;2-S ↗
36. Corrosion characterization of titanium alloys by electrochemical techniques10.1016/j.electacta.2005.02.121 ↗
37. Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applications10.1016/S0022-0728(99)00260-0 ↗
38. Electropolishing and passivation of NiTi shape memory alloy10.1016/j.electacta.2009.11.097 ↗
39. High temperature oxidation behavior of Ti–Ni–Hf shape memory alloy10.1016/j.tca.2014.02.016 ↗
40. In situ synchrotron radiation x-ray diffraction study on phase and oxide growth during a high temperature cycle of a NiTi-20 at.% Zr high temperature shape memory alloy10.1007/s40830-018-0149-0 ↗
41. Corrosion performance of HVOF and APS thermally sprayed NiTi intermetallic coatings in 3.5% NaCl solution10.1016/j.corsci.2009.11.034 ↗
42. Corrosion behavior of steel with different microstructures under various elastic loading conditions10.1016/j.corsci.2013.06.012 ↗
43. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
44. Electrochemical and corrosion behaviors of sputtered TiNi shape memory films10.1088/0964-1726/25/3/035039 ↗
45. Mohajeri · 2018
46. Corrosion monitoring of NiTi alloy with small-amplitude potential intermodulation technique10.1117/12.2300947 ↗
47. Synergistic effects of corrosion and slow strain rate loading on the mechanical and electrochemical response of an aluminium alloy10.1016/j.corsci.2019.03.018 ↗