Flexible skin for measurement of boundary layer state and flight attitude identification on UAV
Source abstract
Abstract
Abstract The wall shear stress and pressure are important for analyzing boundary layer flow and evaluating the aerodynamic performance of the aircraft. In this study, a flexible skin consisting of dual layer hot-film sensors and pressure belts was developed to measure the distribution of wall shear stress and pressure on an unmanned aerial vehicle during increase of angle of attack (AOA), tail spin, and decreases of AOA. The sensitivity of the dual layer hot-film sensor is improved by about 150% due to heat conduction reduced. The relative error of pressure belt is less than 1% at 10 °C–65 °C. The boundary layer separation and reattachment time, separation AOA and time-shift of the flow field changes in flight conditions are determined. The separated AOA of the left and right wing boundary layers are 26.41° and 17.58° respectively. There is a delay about 4 s between the separation of the boundary layer and the entry of the tail spin, which can provide early warning to prevent abnormal flight conditions such as post stall and tail spin.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Turbulent Flows · Aerospace and Aviation Technology · Aerodynamics and Acoustics in Jet Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Boundary-layer transition10.1146/annurev.fl.01.010169.001125 ↗
2. Physical mechanisms of laminar-boundary-layer transition10.1146/annurev.fl.26.010194.002211 ↗
3. Large-scale contribution to mean wall shear stress in high-Reynolds-number flat-plate boundary layers up to 1365010.1017/jfm.2013.629 ↗
4. Wall pressure and shear stress spectra from direct simulations of channel flow10.2514/1.17638 ↗
5. The determination of turbulent skin friction by means of pitot tubes10.1017/S0368393100097704 ↗
6. Skin friction sensor validation for high-speed, high-enthalpy flow applications10.2514/6.2014-2800 ↗
7. A microscale differential capacitive direct wall shear stress sensor10.1109/JMEMS.2011.2140356 ↗
8. Accurate measurements of wall shear stress on a plate with elliptic leading edge10.3390/s18082682 ↗
9. Global luminescent oil-film skin-friction meter10.2514/1.32219 ↗
10. Experimental investigation of pressure measurement and airfoil characteristics at low Reynolds numbers10.2514/1.34769 ↗
11. Airfoil pressure measurements during a blade vortex interaction and a comparison with theory10.2514/3.10378 ↗
12. In-flight boundary-layer transition of a large flat plate at supersonic speeds
13. Flight tests of a supersonic natural laminar flow airfoil10.1088/0957-0233/26/6/064003 ↗
14. Flight test of a resistive heating coating for visualizing flow transition10.2514/6.2020-3089 ↗
15. Sensing elements space design of hot-film sensor array considering thermal crosstalk10.1016/j.sna.2017.08.042 ↗
16. Xu · 2002
17. Aircraft flight parameter detection based on a neural network using multiple hot-film flow speed sensors10.1088/0964-1726/16/4/035 ↗
18. Flight demonstrations of micro-actuator controlled delta wing10.1108/00022661111159933 ↗
19. Flexible shear-stress sensor skin and its application to unmanned aerial vehicles10.1016/S0924-4247(03)00230-9 ↗
20. Flexible micro flow sensor for micro aerial vehicles10.1007/s11465-017-0427-0 ↗
21. Manufacture and application of multisensor systems
22. MEMS pressure belt with sensor interface and communication architecture10.1117/12.436615 ↗
23. The effect of sensor dimensions on the performance of flexible hot film shear stress sensors10.3390/mi10050305 ↗
24. Effects of annealing on the temperature coefficient of resistance of nickel film deposited on polyimide substrate10.1016/j.vacuum.2018.11.016 ↗