Enhancing output performance of wearable triboelectric nanogenerators by manipulating the permittivity of BaTiO3-base/PVA composite films
Source abstract
Abstract
Abstract Triboelectric nanogenerators (TENGs) have been widely used in wearable devices for their low cost, portable and self-powered properties. However, the positive triboelectric materials of TENG are still facing problems of low output performance, poor environmental friendliness, and a complicated manufacturing process. We proposed a wearable BP-TENG using polyvinyl alcohol (PVA) doped BaTiO3-base ceramic powder (BTO-base) with high permittivity. It is worth mentioning that PVA has strong electron-losing ability, and it also has the advantages of low cost, good biocompatibility, environmental protection, and a simple preparation process, which make it an ideal choice as a wearable TENG positive triboelectric material. Different mass ratios of BTO-base are doped into the PVA film, and its doping enhances the charge trapping and storage capacity of the composite film. The maximum output performance is obtained at a doping mass ratio of 8% and a thickness of 70.68 μm, with an open-circuit voltage of 72 V and a short-circuit current of 2.5 μA, which are 80% and 78.6% higher than those of pure PVA film, respectively. In addition, the BP-TENG can be connected to a capacitor through a rectifier circuit to form an energy storage system that can power small electronic devices such as calculators and LCDs. At the same time, BP-TENG can be worn on different parts of the body to sense human motion signals, demonstrating its application potential in the field of wearable electronics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Ionic liquid-based molecular design for transparent, flexible, and fire-retardant triboelectric nanogenerator (TENG) for wearable energy solutions10.1016/j.nanoen.2021.105925 ↗
2. Wearable triboelectric nanogenerators with the reduced loss of triboelectric charges by using a hole transport layer of bar-printed single-wall carbon nanotube random networks10.1016/j.energy.2021.121196 ↗
3. Fabric texture design for boosting the performance of a knitted washable textile triboelectric nanogenerator as wearable power10.1016/j.nanoen.2019.01.038 ↗
4. Triboelectric nanogenerators for human-health care10.1016/j.scib.2020.10.002 ↗
5. Self-powered pulse sensor for antidiastole of cardiovascular disease10.1002/adma.201703456 ↗
6. Research progress on triboelectric nanogenerator for sports applications10.3390/en15165807 ↗
7. Design of self-powered environment monitoring sensor based on TEG and TENG10.1111/age.13131 ↗
8. Wearable triboelectric devices for haptic perception and VR/AR applications10.1016/j.nanoen.2022.107112 ↗
9. Recent advances in nanogenerator-driven self-powered implantable biomedical devices10.1002/aenm.201701210 ↗
10. Current modalities for invasive and non-invasive monitoring of volume status in heart failure10.1136/heartjnl-2011-301330 ↗
11. Advances in solid-state fiber batteries for wearable bioelectronics10.1016/j.cossms.2022.101042 ↗
12. Implantable devices: issues and challenges10.3390/electronics2010001 ↗
13. Flexible triboelectric generator10.1016/j.nanoen.2012.01.004 ↗
14. Triboelectric nanogenerator-based wearable electronic devices and systems: toward informatization and intelligence10.1016/j.dsp.2021.103038 ↗
15. Electrospun nanofiber based TENGs for wearable electronics and self-powered sensing10.1016/j.cej.2022.139060 ↗
16. Opportunities and challenges in triboelectric nanogenerator (TENG) based sustainable energy generation technologies: a mini-review10.1016/j.ceja.2021.100237 ↗
17. Output optimization of biodegradable triboelectric nanogenerators10.1016/j.nanoen.2022.107811 ↗
18. Facile fabrication of triboelectric nanogenerator based on low-cost thermoplastic polymeric fabrics for large-area energy harvesting and self-powered sensing10.1016/j.nanoen.2019.104068 ↗
19. Quantifying the triboelectric series10.1038/s41467-019-09461-x ↗
20. Honeycomb-patterned polyimide-based triboelectric nanogenerator with excellent thermal stability and enhanced electrification performance10.1021/acsaem.2c01469 ↗
21. Performance-enhanced triboelectric nanogenerator based on the double-layered electrode effect10.3390/polym12122854 ↗
22. Cost-effective triboelectric nanogenerator based on teflon tape and conductive copper foil tape10.1016/j.mee.2018.08.002 ↗
23. Conductive composite fiber with customizable functionalities for energy harvesting and electronic textiles10.1021/acsami.1c14273 ↗
24. Tuning the dielectric constant and surface engineering of a BaTiO3/porous PDMS composite film for enhanced triboelectric nanogenerator output performance10.1021/acsomega.1c04222 ↗
25. Wearable high-dielectric-constant polymers with core–shell liquid metal inclusions for biomechanical energy harvesting and a self-powered user interface10.1039/C9TA01249D ↗
26. Wearable triboelectric nanogenerators based on polyamide composites doped with 2D graphitic carbon nitride10.3390/polym14153029 ↗
27. A simple and low-cost triboelectric nanogenerator based on two dimensional ZnO nanosheets and its application in portable electronics10.1016/j.sna.2022.113368 ↗
28. Boosting the power output of a cement-based triboelectric nanogenerator by enhancing dielectric polarization with highly dispersed carbon black nanoparticles toward large-scale energy harvesting from human footsteps10.1021/acssuschemeng.1c08629 ↗
29. The unique dielectricity of inorganic perovskites toward high-performance triboelectric nanogenerators10.1016/j.nanoen.2019.104418 ↗
30. Triboelectric nanogenerator/supercapacitor in-one self-powered textile based on PTFE yarn wrapped PDMS/MnO2NW hybrid elastomer10.1016/j.nanoen.2021.105918 ↗
31. Improved performance of ferroelectric nanocomposite flexible film based triboelectric nanogenerator by controlling surface morphology, polarizability, and hydrophobicity10.1016/j.energy.2019.04.150 ↗
32. Enhancing performance of triboelectric nanogenerator by filling high dielectric nanoparticles into sponge PDMS film10.1021/acsami.5b09907 ↗
33. Significantly enhanced performance of triboelectric nanogenerator by incorporating BaTiO3 nanoparticles in poly(vinylidene fluoride) film10.1002/pssa.201900068 ↗
34. Triboelectric properties of BaTiO3/polyimide nanocomposite film10.1016/j.apsusc.2021.151391 ↗
35. Engineering squandered cotton into eco-benign microarchitectured triboelectric films for sustainable and highly efficient mechanical energy harvesting10.1016/j.nanoen.2019.04.081 ↗
36. All-electrospun flexible triboelectric nanogenerator based on metallic MXene nanosheets10.1016/j.nanoen.2019.02.052 ↗
37. High-performance and robust triboelectric nanogenerators based on optimal microstructured poly(vinyl alcohol) and poly(vinylidene fluoride) polymers for self-powered electronic applications10.1016/j.energy.2021.120031 ↗
38. Performance enhanced triboelectric nanogenerator by taking advantage of water in humid environments10.1016/j.nanoen.2021.106303 ↗
39. Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators10.1016/j.nanoen.2020.105515 ↗
40. Dielectric modulated cellulose paper/PDMS‐based triboelectric nanogenerators for wireless transmission and electropolymerization applications10.1002/adfm.201904536 ↗
41. Enhancement of triboelectric charge density by chemical functionalization10.1002/adfm.202004714 ↗
42. Piezoelectric and triboelectric dual effects in mechanical-energy harvesting using BaTiO3/polydimethylsiloxane composite film10.1021/acsami.6b11108 ↗
43. On the electron-transfer mechanism in the contact-electrification effect10.1002/adma.201706790 ↗
44. Quantifying and understanding the triboelectric series of inorganic non-metallic materials10.1038/s41467-020-15926-1 ↗
45. Dynamic behavior of the triboelectric charges and structural optimization of the friction layer for a triboelectric Nanogenerator10.1021/acsnano.6b02076 ↗
46. Triboelectric contact surface charge modulation and piezoelectric charge inducement using polarized composite thin film for performance enhancement of triboelectric generators10.1016/j.nanoen.2016.05.002 ↗
47. Boosting power-generating performance of triboelectric nanogenerators via artificial control of ferroelectric polarization and dielectric properties10.1002/aenm.201600988 ↗
48. Output power density enhancement of triboelectric nanogenerators via ferroelectric polymer composite interfacial layers10.1016/j.nanoen.2019.104300 ↗