Structural deformation and clamping force monitoring of reconfigurable tooling motivated by strain data in aircraft assembly
Source abstract
Abstract
Abstract The quality of aircraft assembly is mainly guaranteed by toolings which are vital to the geometrical accuracy and service performance of aviation products. In this research, a real-time monitoring system that determines the structural deformation and clamping force of reconfigurable toolings using strain data is developed to perceive the service state of the toolings. By laying fiber Bragg gratings on positioning beam and baseplate of the reconfigurable tooling, strain data of the tooling structures are gauged and transferred to curvatures. The beam and baseplate are modeled as one and two-dimensional objects respectively and shape reconstruction algorithms are established to obtain their deflection curve and surface using curvature information. Distribution of fibers is optimized to minimize the conversion error from strain to curvature. An estimation that reveals the mathematical relationship between the shape reconstruction error and measurement interval is implemented, and a mapping model from strains to clamping force of the beam is established. These algorithms are integrated into the self-developed monitoring software and undergo simulating and experimental tests. The maximum relative errors of deformation and force are 4.53% and 4.12% respectively in simulation, and 9.21% and 7.29% individually in experiment, which validates the efficiencies of the method. Tests of the monitoring system suggest that it can provide a timely and accurate sensing of the deformation and force of the tooling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced machining processes and optimization · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Configuration analysis of the ERS points in large-volume metrology system10.3390/s150924397 ↗
2. A novel comparative design procedure for reconfigurable assembly fixtures10.1016/j.cirpj.2017.06.004 ↗
3. An automated reconfigurable flexible fixture for aerospace pipeline assembly before welding 201810.1007/s00170-018-2120-9 ↗
4. A digital twin system of reconfigurable tooling for monitoring and evaluating in aerospace assembly10.1016/j.jmsy.2023.03.004 ↗
5. Station-transfer measurement accuracy improvement of laser tracker based on photogrammetry10.1016/j.measurement.2016.09.008 ↗
6. Laser measurement guides aerospace assembly-with laser-based aircraft alignment system, wing and fuselage components for F-35 fighters find perfect fit
7. A measuring method for large antenna assembly using laser and vision guiding technology10.1016/j.measurement.2016.06.020 ↗
8. Analysis of the indoor GPS system as feedback for the robotic alignment of fuselages using laser radar measurements as comparison10.1016/j.rcim.2012.03.004 ↗
9. Research on the application of indoor GPS in aircraft assembly10.1117/12.2543384 ↗
10. Measurement-assisted assembly applications on airbus final assembly lines10.4271/2003-01-2950 ↗
11. Pose alignment of aircraft structures with distance sensors and CCD cameras10.1016/j.rcim.2017.02.003 ↗
12. Digital-twin deep dynamic camera position optimisation for the V-STARS photogrammetry system based on 3D reconstruction10.1080/00207543.2023.2252108 ↗
13. Vision-guided fixtureless assembly of automotive components10.1016/S0736-5845(02)00064-9 ↗
14. Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals10.1088/1361-6501/aac55b ↗
15. Fast, robust and accurate digital image correlation calculation without redundant computations10.1007/s11340-013-9717-6 ↗
16. Ncorr: open-source 2D digital image correlation Matlab software10.1007/s11340-015-0009-1 ↗
17. Review of single-camera stereo-digital image correlation techniques for full-field 3D shape and deformation measurement10.1007/s11431-017-9090-x ↗
18. Optimisation for clamping force of aircraft composite structure assembly considering form defects and part deformations10.1177/1687814021995703 ↗
19. The optimization of the position and the magnitude of the clamping forces in machining fixtures10.1088/1757-899X/200/1/012015 ↗
20. Real-time monitoring of clamping force of a bolted joint by use of automatic digital image correlation10.1016/j.optlastec.2008.08.010 ↗
21. Measurement of fastening force using dry-coupled ultrasonic waves10.1016/j.ultras.2020.106178 ↗
22. Clamping force model application on the aircraft structural assembly10.1007/s00170-022-10555-y ↗
23. Real-time estimation of 3-D needle shape and deflection for MRI-guided interventions10.1109/TMECH.2010.2080360 ↗
24. Fiber optic shape sensing for monitoring of flexible structures10.1117/12.917490 ↗
25. FBG-based shape sensing tubes for continuum robots
26. Fibre-optic measurement of strain and shape on a helicopter rotor blade during a ground run: 2. Measurement of shape10.1088/1361-665X/ac736c ↗
27. Fibre-optic measurement of strain and shape on a helicopter rotor blade during a ground run: 1 measurement of strain10.1088/1361-665X/ac736d ↗
28. Flight demonstration of aircraft wing monitoring using optical fiber distributed sensing system10.1088/1361-665X/aae411 ↗
29. Application of fibre optic sensing systems to measure rotor blade structural dynamics10.1016/j.ymssp.2021.107758 ↗
30. Static shape measurements using a multiplexed fiber Bragg grating sensor system10.1117/12.538091 ↗
31. Estimation of dynamic structural displacements using fiber Bragg grating strain sensors10.1016/j.jsv.2007.04.037 ↗
32. Shape estimation with distributed fiber Bragg grating sensors for rotating structures10.1088/0964-1726/20/3/035011 ↗
33. Displacement field estimation for a two-dimensional structure using fiber Bragg grating sensors10.1088/0964-1726/18/2/025006 ↗
34. A modal expansion method for displacement and strain field reconstruction of a thin-wall component during machining10.1109/TMECH.2018.2790922 ↗
35. Shape sensing using distributed fiber optic strain measurements10.1117/12.566653 ↗
36. Shape sensing using multi-core fiber optic cable and parametric curve solutions10.1364/OE.20.002967 ↗
37. Shape sensing using multi-core fiber10.1364/OFC.2015.Th1C.2 ↗
38. Multi-core optical fibers with Bragg gratings as shape sensor for flexible medical instruments10.1109/JSEN.2019.2905010 ↗
39. Parallel transport frame for fiber shape sensing10.1109/JPHOT.2017.2782736 ↗
40. An innovative 3D colonoscope shape sensing sensor based on FBG sensor array
41. Demonstration of large curvature radius shape sensing using optical frequency domain reflectometry in multi-core fibers10.1109/JPHOT.2021.3098300 ↗
42. Shape sensing of inflatable aerospace structures with fiber optic curvature rosettes10.1117/12.2263599 ↗
43. Stretchable sensing skin with S-shape multicore optical fiber implantation for morphing flight vehicles10.1016/j.ijleo.2019.163088 ↗
44. Dual-layer orthogonal fiber Bragg grating mesh based soft sensor for 3-dimensional shape sensing10.1364/OE.25.024727 ↗
45. Shape reconstruction of woven fabrics using fiber Bragg grating strain sensors10.1088/1361-665X/ab4ba3 ↗
46. Fiber Bragg grating based quasi-distributed bolt force sensor with torque resistance10.1016/j.measurement.2022.111063 ↗
47. Real-time monitoring of bolt clamping force at high temperatures using metal-packaged regenerated fiber Bragg grating sensors10.1016/j.ijpvp.2019.03.006 ↗
48. Bolt tension monitoring with reusable fiber Bragg-grating sensors10.1177/0309324715598265 ↗
49. A hydraulic fiber Bragg grating force sensor and its monitoring system for axial bolt load measurement in anchorage engineering10.1088/1361-6501/aadeb5 ↗
50. A three-axis force fingertip sensor based on fiber Bragg grating10.1016/j.sna.2016.08.020 ↗
51. Multi-component force sensor based on multiplexed fibre Bragg grating strain sensors10.1088/0957-0233/12/7/310 ↗
52. High sensitivity force and pressure measurements using etched singlemode polymer fiber Bragg gratings10.1109/JSEN.2013.2242883 ↗
53. Highly sensitive compact force sensor based on microfiber Bragg grating10.1109/LPT.2012.2187049 ↗
54. Multimode proximal force FBG-based sensors with high-resolution for catheter surgical robots10.1109/TIM.2023.3285990 ↗
55. Development of a fiber Bragg grating-enabled clamping force sensor integrated on a grasper for laparoscopic surgery10.1109/JSEN.2021.3081444 ↗
56. A force/position measurement method of surgical forceps based on fiber Bragg gratings10.1109/JSEN.2022.3224042 ↗