journal article·2024-11-01Open access

Fluid-filled lattices for responsive orthotic insoles

Dayna Cracknell, Mark Battley, Justin Fernandez, Maedeh Amirpour

Smart Materials and Structures· Volume 33· Issue 11

Abstract

Abstract Orthotic insoles are essential for alleviating discomfort and preventing injuries in the foot caused by high peak pressures in the plantar tissue. Traditional orthotic insoles, often prescribed to address these issues, are designed based on the static foot shape and pressure measurements, lacking responsiveness to dynamic movements. This study explores the behaviour of fluid-filled lattices for improving the functionality of orthotic insoles, focusing on energy dissipation and pressure redistribution capabilities. Using numerical homogenisation, the research integrates hyperelastic and permeability models to simulate the behaviour of Solid–Liquid Composites. Experimental tests validated these models, examining the influence of fluid viscosity and structural variations on energy dissipation and pressure distribution. Results show that fluid-filled lattices provide enhanced energy dissipation and reduce peak pressures by evening out the pressure distribution compared to non-fluid-filled samples. These findings highlight the potential of fluid-filled lattices to improve the performance and comfort of orthotic insoles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Prosthetics and Rehabilitation Robotics · Advanced Materials and Mechanics · Soft Robotics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Plantar heel pain and plantar fasciitis
2. Effects of total contact insoles on the plantar stress redistribution: a finite element analysis10.1016/S0268-0033(03)00080-9 ↗
3. A 3-dimensional finite element model of the human foot and ankle for insole design10.1016/j.apmr.2004.03.031 ↗
4. Impact of soft and hard insole density on postural stability in older adults10.1016/j.gerinurse.2012.01.007 ↗
5. Evolution of foot orthotics—Part 1: coherent theory or coherent practice?10.1067/mmt.2002.121415 ↗
6. Effects of rigid and soft foot orthoses on dynamic balance in females with flatfoot
7. Effectiveness of foot orthoses and shock-absorbing insoles for the prevention of injury: a systematic review and meta-analysis10.1136/bjsports-2016-096671 ↗
8. Systematic review on the comparative effectiveness of foot orthoses in patients with rheumatoid arthritis10.1186/s13047-019-0338-x ↗
9. A study of optimal equivalent characteristics of insole materials10.1115/DETC1993-0104 ↗
10. Cracknell · 2024
11. Mechanical properties of additively manufactured metal lattice structures: data review and design interface10.1016/j.addma.2020.101301 ↗
12. Mechanical behavior of TPMS-based scaffolds: a comparison between minimal surfaces and their lattice structures10.1007/S42452-019-1167-Z/FIGURES/9 ↗
13. Mechanical properties and fluid permeability of gyroid and diamond lattice structures for intervertebral devices: functional requirements and comparative analysis10.1080/14686996.2021.1907222 ↗
14. A comparative investigation on the mechanical properties and cytotoxicity of Cubic, Octet, and TPMS gyroid structures fabricated by selective laser melting of stainless steel 316L10.1016/J.JMBBM.2022.105151 ↗
15. Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison10.1016/J.JMBBM.2017.01.016 ↗
16. Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing10.1080/17452759.2018.1491713 ↗
17. Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials10.1016/J.ADDMA.2017.12.006 ↗
18. Mechanical behavior of Al–Si10–Mg gyroid surface with variable topological parameters fabricated via laser powder bed fusion10.1016/J.JMRT.2021.11.008 ↗
19. The dynamic compressive response of an open-cell foam impregnated with a non-newtonian fluid10.1115/1.3130825 ↗
20. The dynamic compressive response of open-cell foam impregnated with a Newtonian fluid10.1115/1.2912940 ↗
21. Fluid-filled helmet liner concept for protection against blast-induced traumatic brain injury
22. Impact properties of shear thickening fluid impregnated foams10.1088/0964-1726/23/3/035022 ↗
23. ABAQUS theory manual
24. Properties of Soil10.1002/9780470168097 ↗
25. 3D-printed soft and hard meta-structures with supreme energy absorption and dissipation capacities in cyclic loading conditions10.1002/ADEM.202201189 ↗
26. Metamaterial boat fenders with supreme shape recovery and energy absorption/dissipation via FFF 4D printing10.1088/1361-665X/ACEDDE ↗
27. Orthotic materials: a review of the selection process
28. Study of manufacturing defects on compressive deformation of 3D-printed polymeric lattices10.1007/s00170-022-10062-0 ↗
29. Moisture sensitivity and compressive performance of 3D-printed cellulose-biopolyester foam lattices10.1016/j.addma.2021.101918 ↗
30. Coaxial direct ink writing of shear stiffening gel/Ecoflex composite for customized insoles10.1016/J.COMPOSITESB.2021.109268 ↗
31. Effects of shoe weight on landing impact and side-to-side asymmetry10.1371/JOURNAL.PONE.0256061 ↗
32. Rocker shoe, minimalist shoe, and standard running shoe: a comparison of running economy10.1016/J.JSAMS.2013.04.015 ↗
33. Gel-filled (Liqua Care) therapeutic insoles reduce peak forefoot pressure and increase TcpO2 in individuals with diabetes mellitus and peripheral vascular insufficiency10.1177/1474651411400944 ↗
34. A study to investigate the effect of sofsole® silicone gel insoles on plantar pressure (kPa), in non-pathological participants
35. A closer look at the principles of fluid dynamics as they relate to orthoses
36. Semiactive knee orthotic using a mr damper and a smart insole to control the damping force sensing the plantar pressure10.3389/FNBOT.2022.790020/BIBTEX ↗
37. The effects of fluid-filled insoles on reduction of plantar pressures during treadmill walking: a pilot study
38. A study of the immediate effects of glycerine-filled insoles, contoured prefabricated orthoses and flat insoles on single-leg balance, gait patterns and perceived comfort in healthy adults10.1186/s13047-015-0107-4 ↗
39. Gait patterns in transtibial amputee fallers vs. non-fallers: biomechanical differences during level walking10.1016/j.gaitpost.2008.10.062 ↗
40. Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading10.1016/J.ADDMA.2018.08.007 ↗
41. The effects of sheet and network solid structures of similar TPMS scaffold architectures on permeability, wall shear stress, and velocity: a CFD analysis10.1016/J.MEDENGPHY.2023.104024 ↗
42. On the permeability of TPMS scaffolds10.1016/J.JMBBM.2020.103932 ↗
43. On the tortuosity of TPMS scaffolds for tissue engineering10.3390/SYM12040596 ↗
44. The effect of tortuosity on permeability of porous scaffold10.3390/BIOMEDICINES11020427 ↗