Modeling and analysis of a linear ultrasonic motor: consider the slider movement characteristic
Source abstract
Abstract
Abstract In this article, a favorable dynamical model for linear ultrasonic motor (LUSM) is proposed to investigate the influence of the slider movement characteristic. Linear rolling guide is the common structure as a slider in LUSM, and it also is used in this study. Based on Hertz contact theory and the coulomb’s friction law, contact mechanics and contact stiffness between the rolling balls and raceway has been analyzed. Then the dynamic model for LUSM considering the contact stiffness is obtained. In particular, the contact stiffness on the load direction will changed by the sliding of the slider during the motion of LUSM. Moreover, the output performance of LUSM has been analyzed by the suggested model. There is a speed fluctuation caused by the different internal contact stiffness of the slider periodically, affected the positioning accuracy of the LUSM. Furthermore, an experiment is designed to verify the feasibility and effectiveness of this proposed model by comparing the simulation results with the measured one. The results show that the proposed model is more accurate than the traditional model to evaluate the variation of output performance of the motor caused by the linear rolling guide movement. These discussions will be very useful for the improvement of control and the optimal design of LUSM.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Piezoelectric Actuators and Control · Adhesion, Friction, and Surface Interactions · Iterative Learning Control Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Transducer for high speed and large thrust ultrasonic linear motor using two sandwich-type vibrators10.1109/58.726442 ↗
2. Precise contour motion of XY stage driven by ultrasonic linear motors in a high vacuum environment10.1007/s12541-016-0037-5 ↗
3. Trajectory tracking and vibration suppression of a 3-PRR parallel manipulator with flexible links10.1007/s11044-013-9407-2 ↗
4. Design and analysis of a novel 3-DOF spatial parallel microgripper driven by LUMs10.1016/j.rcim.2016.06.001 ↗
5. Investigation on force transmission of direct-drive thorax unit with four ultrasonic motors for a flapping microaerial vehicle10.1080/01691864.2013.861338 ↗
6. Contact analysis and modeling of standing wave linear ultrasonic motor10.1007/s11595-011-0396-9 ↗
7. The contact problem of hard contact materials linear ultrasonic motors10.1007/s10832-013-9807-y ↗
8. Design and optimization of a modal-independent linear ultrasonic motor10.1109/TUFFC.2014.2937 ↗
9. Dynamic modeling and characteristics analysis of a modal-independent linear ultrasonic motor10.1016/j.ultras.2016.07.018 ↗
10. Dynamic modeling and analysis of a bimodal ultrasonic motor10.1109/TUFFC.2003.1193618 ↗
11. Modeling stick-slip-separation dynamics in a bimodal standing wave ultrasonic motor10.1016/j.jsv.2016.07.003 ↗
12. Experimental and analytical investigations on normal and angular stiffness of linear guides in manufacturing systems10.1016/j.procir.2015.12.033 ↗
13. Contact analysis and performance evaluation of standing-wave linear ultrasonic motors via a physics-based contact model10.1088/1361-665X/aaf11a ↗
14. Effects of wear on dynamic characteristics and stability of linear guides10.1007/s11012-016-0605-x ↗
15. Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools10.1016/j.precisioneng.2012.02.001 ↗
16. Dynamic and stability analysis of the linear guide with time-varying, piecewise-nonlinear stiffness by multi-term incremental harmonic balance method10.1016/j.jsv.2015.02.021 ↗
17. Modeling and experimental validation of a linear ultrasonic motor considering rough surface contact10.1088/1361-665X/aa60fa ↗
18. Harris · 2001
19. Modeling and analysis of stick-slip motion in a linear piezoelectric ultrasonic motor considering ultrasonic oscillation effect10.1016/j.ijmecsci.2016.01.016 ↗