journal article·2017-03-01

Real time monitoring of spot-welded joints under service load using lead zirconate titanate (PZT) transducers

Ping Yao, Botong Zheng, Mina Dawood, Linsheng Huo, Gangbing Song

Smart Materials and Structures· Volume 26· Issue 3
Publisher page

Abstract

Abstract This paper proposes a nondestructive method to evaluate the health status of resistance spot-welded (RSW) joint under service load using lead zirconate titanate (PZT) active sensing system, in which the PZT transducers were used as both actuator and sensor. The physical principle of the approach was validated through a numerical analysis showing that an opening between the faying faces at the welded joint occurred under tension load. The opening decreased the contact area hence reduced the amplitude of the stress wave received by the PZT sensor. Therefore, by comparing the energy index of the signals before and after the loading, the health condition of the joint can be evaluated. Five ST14 steel single lap joint specimens were tested under tension load while being monitored by the PZT sensing system and digital image correlation (DIC) system in real time. The data obtained from the DIC system validated the numerical results. By comparing the energy index of the signal obtained from the PZT sensing system before and after unloading, it was concluded that the RSW joint was intact after being loaded to the service load. The proposed method is promising in evaluating the health condition of RSW joint nondestructively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Guangdong Polytechnic Normal University

University of Houston

University of Houston, Houston

University of Technology

References (57)

Show source-provided references
1. A nonlinear current control method for resistance spot welding10.1109/TMECH.2013.2251351 ↗
2. Review of control systems for resistance spot welding:past and current practices and emerging trends10.1179/stw.1996.1.1.1 ↗
3. Critical review of automotive steels spot welding: process, structure and properties10.1179/1362171813Y.0000000120 ↗
4. review of resistance spot welding of steel sheets part 1 modelling and control of weld nugget formation10.1179/095066004225010523 ↗
5. Study on effect of electrode force on resistance spot welding process10.1063/1.4893968 ↗
6. IR-based spot weld NDT in automotive applications, in SPIE sensing technology + applications
7. Online nugget diameter control system for resistance spot welding10.1007/s00170-013-4886-0 ↗
8. Real time monitoring weld quality of resistance spot welding for stainless steel10.2355/isijinternational.49.553 ↗
9. Overview of resistance spot welding control10.1179/174329308X283893 ↗
10. On the development of nugget growth model for resistance spot welding10.1063/1.4872247 ↗
11. New technology for measuring dynamic resistance and estimating strength in resistance spot welding10.1088/0957-0233/11/8/311 ↗
12. Quality estimation of resistance spot welding by using pattern recognition with neural networks10.1109/TIM.2003.822713 ↗
13. Study on weld quality control of resistance spot welding using a neuro-fuzzy algorithm10.1007/978-3-540-30134-9_73 ↗
14. Resistance spot weld strength estimation based on electrode tip displacement/velocity curve obtained by image processing10.1179/1362171814Y.0000000212 ↗
15. Image-based electrode tip displacement in resistance spot welding10.1088/0957-0233/23/6/065401 ↗
16. Resistance spot welding control based on the temperature measurement10.1179/1362171813Y.0000000131 ↗
17. Weld quality inspection based on online measured indentation from servo encoder in resistance spot welding10.1109/TIM.2007.900423 ↗
18. Quality estimation of resistance spot weld based on logistic regression analysis of welding power signal10.1007/s12541-015-0340-6 ↗
19. Quality evaluation in small-scale resistance spot welding by electrode voltage recognition10.1080/13621718.2015.1115161 ↗
20. An on-line ANN-based approach for quality estimation in resistance spot welding10.4028/www.scientific.net/AMR.112.141 ↗
21. On-line quality estimation in resistance spot welding10.1115/1.1286814 ↗
22. Estimating the strength of resistance spot welds based on sonic emission10.1179/174329305X44107 ↗
23. Enhancing real-time ultrasound signatures of molten nugget growth for quality evaluation of resistance spot welds10.1109/ULTSYM.2009.5441876 ↗
24. Health monitoring of steel structures using impedance of thickness modes at PZT patches10.12989/sss.2005.1.4.339 ↗
25. Quantitative health monitoring of bolted joints using a piezoceramic actuator–sensor10.1088/0964-1726/13/1/003 ↗
26. Active interface debonding detection of a concrete-filled steel tube with piezoelectric technologies using wavelet packet analysis10.1016/j.ymssp.2011.07.029 ↗
27. Experimental application of a wireless earthquake damage monitoring system (WiAMS) using PZT transducers in reinforced concrete beams10.2495/ERES150191 ↗
28. Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers,’10.1088/0964-1726/21/4/047001 ↗
29. Concrete structural health monitoring using embedded piezoceramic transducers10.1088/0964-1726/16/4/003 ↗
30. Wind turbine blade health monitoring with piezoceramic-based wireless sensor network10.1080/19475411.2013.836577 ↗
31. Monitoring the soil freeze-thaw process using piezoceramic-based smart aggregate10.1061/(ASCE)CR.1943-5495.0000066 ↗
32. Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring10.1088/0964-1726/16/4/032 ↗
33. Health monitoring of welded structures using statistical process control10.1016/j.ymssp.2011.09.023 ↗
34. A smart health monitoring system with application to welded structures using piezoceramic and fiber optic transducers10.1177/1045389X06056064 ↗
35. Adaptive health monitoring concepts for spot-welded and weld-bonded structural joints
36. Experimental investigation of E/M impedance health monitoring for spot-welded structural joints10.1106/N0J5-6UJ2-WlGV-Q8MC ↗
37. Monitoring of fatigue in welded beams using piezoelectric wafer based impedance technique10.1007/s10921-013-0209-5 ↗
38. A piezoelectric transducer for weld defect detection based on first-order shear horizontal (SH1) mode10.1109/SPAWDA.2015.7364483 ↗
39. Numerical and experimental study of nugget size growth in resistance spot welding of austenitic stainless steels10.1016/j.jmatprotec.2011.09.004 ↗
40. Modeling of resistance spot weld nugget growth
41. New parametric study of nugget size in resistance spot welding process using finite element method10.1016/j.matdes.2009.06.042 ↗
42. Comparative studies on stresses in weld-bonded, spot-welded and adhesive-bonded joints10.1016/S0924-0136(98)00355-0 ↗
43. Predicting resistance spot weld failure modes in shear tension tests of advanced high-strength automotive steels
44. Optimal placement of piezoelectric actuators in adaptive truss structures10.1006/jsvi.1994.1104 ↗
45. Modeling and simulation of Lamb wave generation with piezoelectric plates10.1080/15376490902746780 ↗
46. Effects of spot diameter and sheets thickness on fatigue life of spot welded structure based on FEA approach10.3844/ajassp.2009.137.142 ↗
47. Staszewski · 2004 · 117
48. A review of piezoelectric energy harvesting based on vibration10.1007/s12541-011-0151-3 ↗
49. Optimizing piezoelectric transformer for maximum power transfer10.1088/0964-1726/12/3/308 ↗
50. Modeling the effects of electromechanical coupling on energy storage through piezoelectric energy harvesting10.1109/TMECH.2009.2027318 ↗
51. Acoustic research and control of piezoelectric speakers using a spatially modulated TiOPc/piezo buzzer actuator10.1109/ISOT.2014.84 ↗
52. Application of a classical lamination theory model to the design of piezoelectric composite unimorph actuators10.1177/1045389X06056059 ↗
53. In situ measurements of strains in composite battery electrodes during electrochemical cycling10.1007/s11340-014-9873-3 ↗
54. Bond behavior of superelastic shape memory alloys to carbon fiber reinforced polymer composites10.1016/j.compositesb.2015.03.043 ↗
55. Debonding of carbon fiber–reinforced polymer patches from cracked steel elements under fatigue loading10.1061/(ASCE)CC.1943-5614.0000694 ↗
56. Spot welding–adhesive joints: modelling and testing10.1080/00218464.2013.766599 ↗
57. Structural health monitoring of multi-spot welded joints using a lead zirconate titanate based active sensing approach10.1088/0964-1726/25/1/015031 ↗