journal article·2017-10-01

Enhanced photomechanical response of a Ni–Ti shape memory alloy coated with polymer-based photothermal composites

M G Perez-Zúñiga, F M Sánchez-Arévalo, J Hernández-Cordero

Smart Materials and Structures· Volume 26· Issue 10
Publisher page

Abstract

Abstract A simple way to enhance the activation of shape memory effects with light in a Ni–Ti alloy is demonstrated. Using polydimethylsiloxane-carbon nanopowder (PDMS+CNP) composites as coatings, the one-way shape memory effect (OWSME) of the alloy can be triggered using low power IR light from a laser diode. The PDMS+CNP coatings serve as photothermal materials capable to absorb light, and subsequently generate and dissipate heat in a highly efficient manner, thereby reducing the optical powers required for triggering the OWSME in the Ni–Ti alloy. Experimental results with a cantilever flexural test using both, bare Ni–Ti and coated samples, show that the PDMS+CNP coatings perform as thermal boosters, and therefore the temperatures required for phase transformation in the alloy can be readily obtained with low laser powers. It is also shown that the two-way shape memory effect (TWSME) can be set in the Ni–Ti alloy through cycling the TWSME by simply modulating the laser diode signal. This provides a simple means for training the material, yielding a light driven actuator capable to provide forces in the mN range. Hence, the use of photothermal coatings on Ni–Ti shape memory alloys may offer new possibilities for developing light-controlled smart actuators.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing · Shape Memory Alloy Transformations · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidad Nacional Autónoma de México

Funding

Consejo Nacional de Ciencia y Tecnología · PAPIIT-DGAPA

References (19)

Show source-provided references
1. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
2. Otsuka · 1999
3. Development of a stress-induced martensitic transformation criterion for a cu-al-be polycrystalline shape memory alloy undergoing uniaxial tension10.1016/j.actamat.2015.06.044 ↗
4. Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers10.1073/pnas.0600079103 ↗
5. Use of time history speckle pattern and pulsed photoacoustic techniques to detect the self-accommodating transformation in a cu-al-ni shape memory alloy10.1016/j.matchar.2010.02.008 ↗
6. Wavelength-selective shape memory alloy for wireless microactuation of a bistable curved beam10.1109/TIE.2010.2046609 ↗
7. Contactless and selective energy transfer to a bistable micro-actuator using laser heated shape memory alloy10.1088/0964-1726/21/11/115027 ↗
8. Light-driven actuator with energy conversion efficiency in the order of 110.1143/APEX.2.034502 ↗
9. Remote light energy harvesting and actuation using shape memory alloy—piezoelectric hybrid transducer10.1088/0964-1726/22/5/052001 ↗
10. Visible microactuation of a ferromagnetic shape memory alloy by focused laser beam10.1088/0964-1726/21/3/032003 ↗
11. Light-induced shape-memory polymers10.1038/nature03496 ↗
12. Synergistic effect of carbon nanofiber and carbon nanopaper on shape memory polymer composite10.1063/1.3323096 ↗
13. Laser induced deformation in polydimethylsiloxane membranes with embedded carbon nanopowder10.1088/0964-1726/22/3/037001 ↗
14. Thermocapillary flow in glass tubes coated with photoresponsive layers10.1021/la404221p ↗
15. Heat generation and conduction in pdms-carbon nanoparticle membranes irradiated with optical fibers10.1016/j.ijthermalsci.2015.04.009 ↗
16. Photothermal effects and applications of polydimethylsiloxane membranes with carbon nanoparticles10.3390/polym8040084 ↗
17. Zurbitu · 201010.5772/9985 ↗
18. An introduction to martensite and shape memory10.1016/B978-0-7506-1009-4.50005-6 ↗
19. Ugural · 2003