journal article·2022-04-01

The effect of fabric properties on the performance of a textile based ferroelectret generator toward human body energy harvesting

Junjie Shi, Steve P Beeby

Smart Materials and Structures· Volume 31· Issue 4
Publisher page

Abstract

Abstract This paper reports the lamination of two thin fluorinated ethylene propylene (FEP) films onto the back and front surfaces of a conventional textile forming a sandwich structure which creates a textile-based ferroelectret. In this work, we study the effect of the physical properties and dimensions of the textile on the piezoelectric properties and energy harvesting performance of the ferroelectret. Five different fabrics with different thicknesses and Young’s modulus were used to form textile based ferroelectret harvesters. Thinner textiles result in increased piezoelectric properties of the fabricated FEP textile ferroelectret. The highest measured stable maximum piezoelectric coefficient d 33 of 987 pC N −1 was achieved by the thinnest silk textile FEP ferroelectret. The energy harvester based on the FEP-silk textile ferroelectret generates a peak output power density of 2.26 µ W cm −2 . The textile ferroelectret can charge a 10 µ F capacitor used to store the harvested energy to 3.2 V in 40 s. This corresponds to an average output power of 1.07 µ W when subjected to compressive pressures of 30 kPa applied at a frequency of 1 Hz with a 90 MΩ loading resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Innovative Energy Harvesting Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Energy harvesting from human and machine motion for wireless electronic devices10.1109/JPROC.2008.927494 ↗
2. Direct-write piezoelectric polymeric nanogenerator with high energy conversion efficiency10.1021/nl9040719 ↗
3. Flexible triboelectric generator10.1016/j.nanoen.2012.01.004 ↗
4. Flexible nanogenerators for energy harvesting and self-powered electronics10.1002/adma.201504299 ↗
5. Flexible piezoelectric nano-composite films for kinetic energy harvesting from textiles10.1016/j.nanoen.2017.01.037 ↗
6. Recent progress on PZT based piezoelectric energy harvesting technologies10.3390/act5010005 ↗
7. An overview of lead-free piezoelectric materials and devices10.1039/C8TC04515A ↗
8. PVDF-based ferroelectric polymers in modern flexible electronics10.1002/aelm.201600460 ↗
9. Enhanced piezoelectric energy harvesting performance of flexible PVDF-TrFE bilayer films with graphene oxide10.1021/acsami.5b09502 ↗
10. Energy scavenging with shoe-mounted piezoelectrics10.1109/40.928763 ↗
11. Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm10.1073/pnas.1317233111 ↗
12. Textile-based triboelectric nanogenerator with alternating positive and negative freestanding woven structure for harvesting sliding energy in all directions10.1016/j.nanoen.2021.106739 ↗
13. Large-scale fabrication of robust textile triboelectric nanogenerators10.1016/j.nanoen.2020.104605 ↗
14. An omnidirectional stretchable hyper-elastic dielectric composed triboelectric textile for energy harvesting10.1016/j.matlet.2021.130859 ↗
15. Ultrastable and high-performance silk energy harvesting textiles10.1007/s40820-019-0348-z ↗
16. Biomechanical energy harvest based on textiles used in self-powering clothing10.1177/1558925020967352 ↗
17. Wearable textile power module based on flexible ferroelectret and supercapacitor10.1002/ente.201800938 ↗
18. Ferroelectret materials and devices for energy harvesting applications10.1016/j.nanoen.2018.12.040 ↗
19. Flexible ferroelectret polymer for self-powering devices and energy storage systems10.1021/acsami.9b02233 ↗
20. Cellular polymer ferroelectret: a review on their development and their piezoelectric properties10.1002/adv.21686 ↗
21. Flexible and biocompatible polypropylene ferroelectret nanogenerator (FENG): on the path toward wearable devices powered by human motion10.1016/j.nanoen.2016.10.007 ↗
22. Study of porous dielectrics as electret materials10.1109/94.660767 ↗
23. High surface-charge stability of porous polytetrafluoroethylene electret films at room and elevated temperatures10.1088/0022-3727/32/17/102 ↗
24. Piezoelectric property improvement of polyethylene ferroelectrets using postprocessing thermal-pressure treatment10.1002/pat.4453 ↗
25. Effects of parameter changes on the structure and properties of low-density polyethylene foam10.1002/vnl.20177 ↗
26. Optimization of the cellular morphology of biaxially stretched thin polyethylene foams produced by extrusion film blowing10.1177/0262489318797517 ↗
27. Growth of gas bubbles in the foam extrusion process10.1002/(SICI)1098-2329(200022)19:2<97::AID-ADV3>3.0.CO;2-B ↗
28. Multilayer ferroelectret-based energy harvesting insole10.1088/1742-6596/660/1/012118 ↗
29. Fluoroethylenepropylene ferroelectret films with cross-tunnel structure for piezoelectric transducers and micro energy harvesters10.1063/1.4893367 ↗
30. Ferroelectret nanogenerator with large transverse piezoelectric activity10.1016/j.nanoen.2018.05.016 ↗
31. Energy harvesting from vibration using flexible floroethylenepropylene piezoelectret films with cross-tunnel structure10.1109/TDEI.2015.7116321 ↗
32. Optimization a structure of MEMS based PDMS ferroelectret for human body energy harvesting and sensing10.1088/1361-665X/ab1ce2 ↗
33. Piezoelectric cellular micro-structured PDMS material for micro-sensors and energy harvesting10.1088/1742-6596/660/1/012040 ↗
34. Fluorinated polyethylene propylene ferroelectrets with an air-filled concentric tunnel structure: preparation, characterization, and application in energy harvesting10.3390/mi11121072 ↗
35. Charge-distribution in teflon fep (fluoroethylenepropylene) negatively corona-charged to high potentials10.1063/1.351127 ↗
36. A percolation theory analysis of surface potential decay related to corona charged polypropylene (PP) electrets10.1088/0953-8984/16/3/021 ↗
37. The energy distribution of trapped charges in polymers based on isothermal surface potential decay model10.1109/TDEI.2015.7116370 ↗
38. Linear decay of charge in electrets10.1103/PhysRevB.59.9954 ↗
39. Emfit film specifications
40. An easy to assemble ferroelectret for human body energy harvesting10.1088/1361-665X/aabdbc ↗
41. Real-time human ambulation, activity, and physiological monitoring: taxonomy of issues, techniques, applications, challenges and limitations10.3390/s131012852 ↗
42. Low-voltage-swing monolithic dc-dc conversion
43. Toward large-scale energy harvesting by a nanoparticle-enhanced triboelectric nanogenerator10.1021/nl4001053 ↗
44. Nanoscale triboelectric-effect-enabled energy conversion for sustainably powering portable electronics10.1021/nl303573d ↗