Performance evaluation of a two-directional energy harvester with low-frequency vibration
Source abstract
Abstract
Abstract This study evaluates the power harnessing performance of a two-directional inertial pendulum energy harvester for miniature underwater mooring platforms (UMPs). This novel harvester can achieve a dominant rotational motion under different parametrical excitations. The two-directional energy harvesting performance is investigated through vibration platform experiments over roll-pitch coupling excitations. The frequency ratio between the pitch and roll motion is about 2 to 1, the roll excitation frequency is over the range of 0.2–0.3 Hz, and the pitch amplitude is much lower than the roll amplitude. Experimental results indicate that the inclination configuration of the harvester can improve two-directional energy harvesting performance significantly with low-frequency vibration. Geometrical tunability through adjusting inclination configuration for the harvester can enhance the two-directional energy harvesting apparently. Four prominent phenomena of the two-directional energy harvesting performance are observed with the increasing load resistance. The motion state transformation of the inertial pendulum can result in dramatical jumps or drops in two-directional energy harvesting.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative Energy Harvesting Technologies · Vibration and Dynamic Analysis · Fluid Dynamics and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Design and analysis of the thermal-stress coupled topology optimization of the battery rack in an AUV10.1016/j.oceaneng.2017.11.025 ↗
2. A low frequency tunable miniature inertial pendulum energy harvester10.1063/1.5051048 ↗
3. Self-powered wireless sensor node enabled by a duck-shaped triboelectric nanogenerator for harvesting water wave energy10.1002/aenm.201601705 ↗
4. Energy replenishment using renewable and traditional energy resources for sustainable wireless sensor networks: a review10.1016/j.rser.2015.02.021 ↗
5. Laboratory experiments on the energy extraction of a sealed ocean kinetic energy harvester for underwater mooring platforms10.1063/1.4935379 ↗
6. Study on force and wave energy conversion efficiency of buoys in low wave energy density seas10.1016/j.enconman.2018.12.074 ↗
7. Numerical simulations of a horizontal axis water turbine designed for underwater mooring platforms10.1016/j.ijnaoe.2015.10.003 ↗
8. Performance prediction of horizontal hydrokinetic energy converter using multiple-cylinder synergy in flow induced motion10.1016/j.apenergy.2016.02.116 ↗
9. Numerical investigation on interactive FIO of two-tandem cylinders for hydrokinetic energy harnessing10.1016/j.oceaneng.2019.106215 ↗
10. Numerical investigation on installation position effect of a miniature vertical-pendulum-type inertial energy harvester for underwater mooring platforms
11. The SEAREV wave energy converter
12. SEAREV: case study of the development of a wave energy converter10.1016/j.renene.2015.01.061 ↗
13. A cross-coupled dual-beam for multi-directional energy harvesting from vortex induced vibrations10.1088/1361-665X/ab5249 ↗
14. A double-beam piezo-magneto-elastic wind energy harvester for improving the galloping-based energy harvesting10.1063/1.5126476 ↗
15. Rotational electromagnetic energy harvester for human motion application at low frequency10.1063/1.5142575 ↗
16. A string-suspended and driven rotor for efficient ultra-low frequency mechanical energy harvesting10.1016/j.enconman.2019.111820 ↗
17. Design, development, and testing of a scaled vertical axis pendulum wave energy converter10.1109/TSTE.2016.2589221 ↗
18. Bretl · 2009
19. Experimental investigations on a low frequency horizontal pendulum ocean kinetic energy harvester for underwater mooring platforms10.1007/s00773-015-0357-7 ↗
20. Layout optimization of an inertial energy harvester for miniature underwater mooring platforms10.1016/j.marstruc.2019.102681 ↗
21. Enhancing power generation of floating wave power generators by utilization of nonlinear roll-pitch coupling10.1088/1361-665X/aa7710 ↗
22. Parametric pendulum based wave energy converter10.1016/j.ymssp.2017.06.026 ↗
23. Investigating threshold escape behavior for the gimballed horizontal pendulum system10.1016/j.jsv.2019.03.008 ↗
24. Potential well hopping and performance of ocean energy harvesters10.1016/j.jsv.2019.115008 ↗
25. A review on the currents in the South China sea: seasonal circulation, South China sea warm current and Kuroshio intrusion10.1023/A:1011117531252 ↗
26. The effect of cubic stiffness nonlinearity on the vortex-induced vibration of a circular cylinder at low Reynolds numbers10.1016/j.oceaneng.2018.12.039 ↗
27. Flow-induced vibration of two elastically mounted tandem cylinders in cross-flow at subcritical Reynolds numbers10.1016/j.oceaneng.2019.01.016 ↗
28. Two-degree-of-freedom flow-induced vibration of a rotating circular cylinder10.1016/j.oceaneng.2019.106505 ↗
29. Direct numerical simulation of the wake adjustment and hydrodynamic characteristics of a circular cylinder symmetrically attached with fin-shaped strips10.1016/j.oceaneng.2019.106756 ↗
30. Hydrodynamic features of three equally spaced, long flexible cylinders undergoing flow-induced vibration10.1016/j.euromechflu.2019.09.021 ↗
31. Application of micro-dynamic pendulum energy harvesters on ocean monitoring platform
32. A model test investigation on vortex-induced motions of a buoyancy can10.1016/j.marstruc.2017.01.004 ↗
33. An experimental study on vortex induced motion of a tethered cylinder in uniform flow10.1016/j.oceaneng.2017.07.018 ↗
34. Hydrodynamic characteristics of two tandem flexible cylinders undergoing flow-induced vibration10.1016/j.oceaneng.2019.106587 ↗
35. High-performance piezoelectric wind energy harvester with Y-shaped attachments10.1016/j.enconman.2018.12.034 ↗
36. Performance evaluation of twin piezoelectric wind energy harvesters under mutual interference10.1063/1.5109457 ↗
37. Equivalent circuit representation of a vortex-induced vibration-based energy harvester using a semi-empirical lumped parameter approach10.1002/er.5228 ↗
38. Performance improvement of aeroelastic energy harvesters with two symmetrical fin-shaped rods10.1016/j.jweia.2019.104051 ↗
39. Energy harvesting from asphalt pavement roadways vehicle-induced stresses: a feasibility study10.1016/j.apenergy.2016.08.116 ↗
40. Passive self-tuning energy harvester for extracting energy from rotational motion10.1063/1.3481689 ↗
41. A review of the recent research on vibration energy harvesting via bistable systems10.1088/0964-1726/22/2/023001 ↗