journal article·2019-01-01Open access

Shunt-diode rectifier: a new scheme for efficient piezoelectric energy harvesting

Alexis Brenes, Elie Lefeuvre, Adrien Badel, Seonho Seok, Chan-Sei Yoo

Smart Materials and Structures· Volume 28· Issue 1

Abstract

Abstract This paper highlights the interest of shunt-diode rectifiers to optimize the performances of piezoelectric vibration energy harvesters based on linear load adaptation. It provides, for the first time, a full analytical study of the input power and frequency bandwidth of such a system. We show that this architecture is well-suited for piezoelectric energy harvesting. In the presented approach, a so-called shunt diode is connected across the electrodes of the piezoelectric transducer, which makes the piezoelectric voltage unidirectional instead of alternating. Thus, DC–DC converters usually used for power optimization can be directly connected to the transducer. We show that weakly-coupled linear inertial piezoelectric energy harvesters generate higher power when connected to a shunt-diode rectifier than to a bridge rectifier. Moreover, the frequency bandwidth is enlarged by the use of the single-diode shunt rectifier, especially for strongly-coupled piezoelectric generators. The proposed architecture is also interesting for low piezoelectric voltages, at which voltage drops across the diodes used for AC–DC conversion critically degrade the power efficiency. Experimental results validate the presented analytical study and highlight the higher efficiency of the shunt-diode rectifier circuit. Compared to a standard bridge rectifier architecture, we demonstrate an increase of +43% output power on a weakly-coupled generator and an increase of +5% bandwidth on a strongly-coupled generator.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Energy Harvesting in Wireless Networks

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Piezoelectric energy harvesting10.1177/0270467608325374 ↗
2. A review of piezoelectric energy harvesting based on vibration10.1007/s12541-011-0151-3 ↗
3. Analysis of power output for piezoelectric energy harvesting systems10.1088/0964-1726/15/6/001 ↗
4. Impedance modeling and analysis for piezoelectric energy harvesting systems10.1109/TMECH.2011.2160275 ↗
5. Improved design and analysis of self-powered synchronized switch interface circuit for piezoelectric energy harvesting systems10.1109/TIE.2011.2167116 ↗
6. Power-conditioning circuitry for a self-powered system based on micro PZT generators in a 0.13 μm low-voltage low-power technology10.1109/TIE.2008.927973 ↗
7. Design and implementation of a direct AC–DC boost converter for low-voltage energy harvesting10.1109/TIE.2010.2069074 ↗
8. A bridgeless boost rectifier for low-voltage energy harvesting applications10.1109/TPEL.2013.2242903 ↗
9. Mechanical energy harvester with ultralow threshold rectification based on SSHI nonlinear technique10.1109/TIE.2009.2014673 ↗
10. A low-power stand-alone adaptive circuit for harvesting energy from a piezoelectric micropower generator10.1109/TIE.2009.2037648 ↗
11. Toward energy harvesting using active materials and conversion improvement by nonlinear processing10.1109/TUFFC.2005.1428041 ↗
12. An efficient piezoelectric energy harvesting interface circuit using a bias-flip rectifier and shared inductor10.1109/JSSC.2009.2034442 ↗
13. An integrated high-performance active rectifier for piezoelectric vibration energy harvesting systems10.1109/TPEL.2011.2162078 ↗
14. A rectifier-free piezoelectric energy harvester circuit10.1109/ISCAS.2009.5117948 ↗
15. Analysis of class E zero-voltage-switching rectifier10.1109/31.55033 ↗
16. Design and experiments of a high-conversion-efficiency 5.8 GHz rectenna10.1109/22.739282 ↗
17. 5.8-GHz circularly polarized rectifying antenna for wireless microwave power transmission10.1109/TMTT.2002.801312 ↗
18. Theoretical analysis of RF-DC conversion efficiency for class-F rectifiers10.1109/TMTT.2014.2298368 ↗
19. Matching network elimination in broadband rectennas for high-efficiency wireless power transfer and energy harvesting
20. Class-E half-wave zero dv/dt rectifiers for inductive power transfer10.1109/TPEL.2016.2641260 ↗
21. Micropower design of a fully autonomous energy harvesting circuit for arrays of piezoelectric transducers10.1109/TPEL.2013.2257856 ↗
22. An autonomous piezoelectric energy harvesting IC based on a synchronous multi-shots technique10.1109/JSSC.2014.2325555 ↗
23. Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode10.1109/TPEL.2003.809379 ↗
24. Adaptive piezoelectric energy harvesting circuit for wireless remote power supply10.1109/TPEL.2002.802194 ↗
25. Extension of impedance matching to nonlinear dynamics of robotic tasks10.1016/S0167-6911(98)00084-X ↗
26. Analysis of piezoelectric energy harvesting system with tunable SECE interface10.1088/1361-665X/aa5e92 ↗
27. Nonlinear conditioning circuits for piezoelectric energy harvesters10.1007/978-3-319-20355-3_10 ↗
28. Large deflection of cantilever beams with geometric nonlinearity: analytical and numerical approaches10.1016/j.ijnonlinmec.2007.12.020 ↗
29. Large deflection effects in flexible energy harvesters10.1177/1045389X11435434 ↗
30. Model of a single mode energy harvester and properties for optimal power generation10.1088/0964-1726/17/6/065026 ↗
31. Hart · 1997
32. Resistive impedance matching circuit for piezoelectric energy harvesting10.1177/1045389X09357971 ↗
33. Power processing circuits for piezoelectric vibration-based energy harvesters10.1109/TIE.2010.2044126 ↗
34. Buck-boost converter for sensorless power optimization of piezoelectric energy harvester10.1109/TPEL.2007.904230 ↗
35. Criterion for material selection in design of bulk piezoelectric energy harvesters10.1109/TUFFC.2010.1734 ↗
36. Improving the scavenged power of nonlinear piezoelectric energy harvesting interface at off-resonance by introducing switching delay10.1109/TPEL.2014.2334611 ↗
37. A highly efficient P-SSHI rectifier for piezoelectric energy harvesting10.1109/TPEL.2015.2422717 ↗
38. 21.2 A 4 μW-to-1mW parallel-SSHI rectifier for piezoelectric energy harvesting of periodic and shock excitations with inductor sharing, cold start-up and up to 681% power extraction improvement10.1109/ISSCC.2016.7418059 ↗
39. Revisit of series-SSHI with comparisons to other interfacing circuits in piezoelectric energy harvesting10.1088/0964-1726/19/12/125009 ↗
40. Li · 2011
41. Switching delay effects on nonlinear piezoelectric energy harvesting techniques10.1109/TIE.2011.2148675 ↗
42. Scaling and performance analysis of MEMS piezoelectric energy harvesters10.1109/JMEMS.2017.2689326 ↗