Wave field synthesis using buckling dielectric elastomer transducers
Source abstract
Abstract
Abstract This work presents a wave field synthesis (WFS) system using a novel loudspeaker concept based on dielectric elastomers. In WFS, large numbers of densely packed, individual audio channels are controlled to recreate arbitrary acoustic scenarios in the listener space, (i.e. listener zones in a room where different audio content can be radiated in different directions from the array, as seen in the supplemental material). Spatial resolution of the system increases with the increasing number of audio channels and with decreasing loudspeaker spacing. This motivates the use of buckling dielectric elastomer transducers (BDETs) as loudspeakers, which feature a simple setup, rendering them extremely thin and lightweight, and which promises ease of manufacture through the low demand on resources. In this work, a WFS system featuring 480 BDET has been developed. The prototype includes software, electronics, and the loudspeaker array. The electronical and mechanical design of the system is presented in detail. A nonlinear model based on the third-order shear deformation theory is applied to the BDET; the BDET is then experimentally assessed and compared to the model. Further, the final loudspeaker array is characterized by directivity measurements in an anechoic room to validate the reproducibility and quality of the setup. The presented technology highlights the structural advantages of smart materials over conventional transducers, which often are too large, heavy, and expensive for such array applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Phenomena Research · Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Berkhout · J. Audio Eng. Soc. · 1988 · 36 · 977
2. Berkhout · J. Acoust. Soc. Am. · 1993 · 93 · 276410.1121/1.405852 ↗
3. The theory of wave field synthesis revisited
4. Behrens · Fortschr. Der Akust. · 2007 · 33 · 685
5. Lener · Proc. Eng. · 2016 · 161 · 56310.1016/j.proeng.2016.08.692 ↗
6. Sound-reproducing apparatus
7. Klehs · J. Audio Eng. Soc. · 2003
8. Brix · J. Audio Eng. Soc. · 2012
9. Sporer · J. Audio Eng. Soc. · 2004
10. Audio Xpress
11. Kaiser · Microsyst. Nanoeng. · 2019 · 5 · 4310.1038/s41378-019-0095-9 ↗
12. Design and electroacoustic analysis of a piezoelectric mems in-ear headphone
13. Zhenyi · J. Polym. Sci. B: Polym. Phys. · 1994 · 32 · 272110.1002/polb.1994.090321618 ↗
14. Pelrine · Science · 2000 · 287 · 83610.1126/science.287.5454.836 ↗
15. Carpi · 2011
16. Gareis · J. Audio Eng. Soc. · 2022 · 70 · 85810.17743/jaes.2022.0032 ↗
17. Moretti · Mech. Syst. Signal Process. · 2022 · 16810.1016/j.ymssp.2021.108677 ↗
18. Garnell · J. Sound Vib. · 2019 · 45910.1016/j.jsv.2019.07.002 ↗
19. Sound radiation properties of dielectric elastomer electroactive polymer loudspeakers
20. Acoustic transducer based on dielectric elastomers
21. Sugimoto · J. Acoust. Soc. Am. · 2013 · 134 · EL43210.1121/1.4824631 ↗
22. Manufacturing process for multilayer dielectric elastomer transducers based on sheet-to-sheet lamination and contactless electrode application10.3390/act12030095 ↗
23. Investigation of a deposition method for the application of electrode layers for dielectric elastomer transducers
24. Beranek · 2019
25. Thiele · J. Audio Eng. Soc. · 1971 · 19 · 382
26. Carrera · Compos. Struct. · 2021 · 26410.1016/j.compstruct.2021.113671 ↗
27. Reddy · J. Appl. Mech. · 1984 · 51 · 74510.1115/1.3167719 ↗
28. Reddy · 2017
29. Reddy · 2006
30. Hong · Arch. Appl. Mech. · 1993 · 63 · 53410.1007/BF00804755 ↗
31. Design of electrical contact for de transducers under thermal considerations
32. Cost-efficient and high-precision hv amplifier for driving de loudspeakers
33. Simultaneous measurement of impulse response and distortion with a swept-sine technique
34. Novak · J. Audio Eng. Soc. · 2015 · 63 · 78610.17743/jaes.2015.0071 ↗
35. Signal conditioning for reducing total harmonic distortion in buckling dielectric elastomer loudspeakers Electroactive Polymer Actuators and Devices (EAPAD) XXIV