Multifunctional graded dielectrics fabricated using dry powder printing*
Source abstract
Abstract
Abstract The ability to fabricate multifunctional devices that combine good structural properties with embedded electromagnetic functionality has many practical applications, including antireflective surfaces for structural radomes, load bearing conformal antennas, integrated RF transmission lines and passive beam forming networks. We describe here a custom made 3D printer that can print high dielectric constant ceramic powders within a low-loss structural composite substrate to produce mechanically robust parts with integrated graded dielectric properties. We fabricated a number of these parts and evaluated their anisotropic dielectric properties by determining the complete permittivity tensor of the printed samples as a function of local powder weight. This data was then experimentally validated using two practical examples: a Chebyshev antireflective stack and a 2D passive beamsteering network. The results of both electromagnetic systems displayed acceptable agreement between the simulated and measured results. This agreement shows that powder printing is a potential approach for fabricating spatially graded dielectric electromagnetic systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Antenna and Metasurface Technologies · Microwave Engineering and Waveguides · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Delaware
Naval Surface Warfare Center Carderock Division, Potomac, MD 20817,
References (18)
Show source-provided references
1. Design and performance evaluation of a dielectric flat lens antenna for millimeter-wave applications10.1109/LAWP.2014.2363596 ↗
2. Broadband antireflective properties of inverse motheye surfaces10.1109/TAP.2010.2052575 ↗
3. Cylindrical Luneburg lens antenna for multi-beam small cell wireless backhaul applications
4. Additive manufacturing of graded dielectrics10.1088/0964-1726/23/4/045029 ↗
5. Acoustic control of powder dispensing in open tubes10.1016/j.powtec.2003.10.008 ↗
6. Metering and dispensing of powder: the quest for new solid free forming techniques10.1016/j.powtec.2007.04.004 ↗
7. Microfeeding with different ultrasonic nozzle designs10.1016/j.ultras.2009.01.003 ↗
8. Metering and dispensing of powder10.1016/j.powtec.2007.04.004 ↗
9. Dose uniformity of fine powders in ultrasonic microfeeding10.1016/j.powtec.2007.01.029 ↗
10. Ultrasound-assisted microfeeding of fine powders10.1016/j.cpart.2007.10.007 ↗
11. A dry powder jet printer for dispensing and combinatorial research10.1016/j.powtec.2004.05.005 ↗
12. Effective medium theories for artificial materials composed of multiple sizes of spherical inclusions in a host continuum10.1109/8.753004 ↗
13. Homogenization of a dielectric mixtre with anisotropic spheres in anisotropic background10.1080/02726349708908536 ↗
14. Pozar · 2005 · p 144
15. Orfanidis · 2014
16. A 3D Luneburg lens antenna fabricated by polymer jetting rapid prototyping10.1109/TAP.2013.2297165 ↗
17. A sliced spherical Luneburg lens10.1109/LAWP.2003.819045 ↗
18. Modeling and simulations of Lüneburg lens antennas for communcation purposes