journal article·2008-04-01

Forming and control of pores by capsule-free hot isostatic pressing in NiTi shape memory alloys

B Yuan, M Zhu, Y Gao, X Li, C Y Chung

Smart Materials and Structures· Volume 17· Issue 2
Publisher page

Abstract

In this study, the pore evolution process of porous NiTi shape memory alloys (SMAs) fabricated by capsule-free hot isostatic pressing (CF-HIP) was investigated by adopting different fabricating parameters. It is shown that porous NiTi SMAs with homogeneous pore distribution and nearly spherical pore shape can be prepared by CF-HIP under suitable conditions. In addition, two novel pore structures were produced, one with a sandwich-like structure, and another with controlled gradient of porosity along the radial direction, with pore size increasing from the outside towards the center of the specimen. The former was obtained by balancing the pressure in the HIP chamber and the gas pressure resulting from the gas expansion in the green sample. The latter resulted from the formation of air bubbles in the liquid phase during the sintering.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. 10.1016/j.pmatsci.2004.10.00110.1016/j.pmatsci.2004.10.001 ↗
2. 10.1016/1044-5803(94)90087-610.1016/1044-5803(94)90087-6 ↗
3. 10.1007/s11661-006-0242-410.1007/s11661-006-0242-4 ↗
4. Li B Y · J. Mater. Res. · 1998 · 13 · 284710.1557/JMR.1998.0389 ↗
5. 10.1177/10453890203279010.1177/104538902032790 ↗
6. 10.1016/j.msea.2003.08.11810.1016/j.msea.2003.08.118 ↗
7. 10.1016/j.msea.2004.04.06810.1016/j.msea.2004.04.068 ↗
8. 10.1016/S1359-6454(00)00184-110.1016/S1359-6454(00)00184-1 ↗
9. 10.1016/S0921-5093(99)00729-710.1016/S0921-5093(99)00729-7 ↗
10. 10.1007/s11661-006-0047-510.1007/s11661-006-0047-5 ↗
11. 10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G ↗
12. Miyoshi T Itoh M Akiyama S Kitahara A Schwartz D S Shih D S Evans A G Wadley H N G · MRS Symp. Proc. · 1998 · 521 · 13310.1557/PROC-521-133 ↗
13. Baumgartner F Gers H Banhart J Ashby M F Fleck N A · Int. Conf. · 1999 · 73
14. 10.1002/(SICI)1527-2648(200004)2:4<168::AID-ADEM168>3.0.CO;2-O10.1002/(SICI)1527-2648(200004)2:4<168::AID-ADEM168>3.0.CO;2-O ↗
15. American Society for Testing and Materials · 1987
16. Thummler F · Introduction to Powder Metallurgy · 1993 · 121
17. Kaysser W A · Proc. Sintering Theory and Practice Conf. · 1984 · 136
18. 10.1111/j.1151-2916.1995.tb08873.x10.1111/j.1151-2916.1995.tb08873.x ↗
19. Smigelskas A · Trans. AIME · 1947 · 171 · 130
20. Munir Z A · Rev. Part. Mater. · 1993 · 1 · 41
21. Kuczynski G C · Trans. AIME · 1956 · 206 · 215
22. 10.1016/j.actamat.2004.11.03610.1016/j.actamat.2004.11.036 ↗
23. Yi H C · J. Mater. Sci. · 1989 · 24 · 344910.1007/BF02385723 ↗