A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions
Source abstract
Abstract
A life cycle analysis was performed on a full roll-to-roll coating procedure used for the manufacture of flexible polymer solar cell modules. The process known as ProcessOne employs a polyester substrate with a sputtered layer of the transparent conductor indium-tin-oxide (ITO). The ITO film was processed into the required pattern using a full roll-to-roll process, employing screen printing of an etch resist and then applying etching, stripping, washing and drying procedures. The three subsequent layers; ZnO, P3HT:PCBM and PEDOT:PSS were slot-die coated and the silver back electrode was screen printed. Finally the polymer solar modules were encapsulated, using a polyester barrier material. All operations except the application of ITO were carried out under ambient conditions. The life cycle analysis delivered a material inventory of the full process for a module production, and an accountability of the energy embedded both in the input materials and in the production processes. Finally, upon assumption of power conversion efficiencies and lifetime for the modules, a calculation of energy pay-back time allowed us to compare this roll-to-roll manufacturing with other organic and hybrid photovoltaic technologies. The results showed that an Energy Pay-Back Time (EPBT) of 2.02 years can be achieved for an organic solar module of 2% efficiency, which could be reduced to 1.35 years, if the efficiency was 3%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic Systems and Sustainability · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate10.1016/j.solmat.2004.02.031 ↗
2. F.C. Krebs, H. Spanggard, T. Kjær, M. Biancardo, J. Alstrup. Large area plastic solar cell modules, in: Materials Science and Engineering B. 138 (2007) 106–111.10.1016/j.mseb.2006.06.008 ↗
3. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
4. Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
5. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
6. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells, ACS Applied Materials & Interfaces
7. M.R. Lilliedal, A.J. Medford, M.V. Madsen, K. Norrman, F.C. Krebs. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics, Solar Energy Materials and Solar Cells, http://dx.doi.org/10.1016/j.solmat.2010.06.007 (2010).10.1016/j.solmat.2010.06.007 ↗
8. Solarmer, Inc., 〈www.solarmer.com〉 (accessed on the 10 June 2010).
9. Heliatek GmbH, 〈www.heliatek.com/〉.
10. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
11. Significant improvement of polymer solar cell stability10.1021/cm051320q ↗
12. Energy requirements of thin-film solar cell modules—a review10.1016/S1364-0321(98)00019-7 ↗
13. E. Alsema, M. Wild-Scholten. Environmental impacts of crystalline silicon photovoltaic module production, in, 2005.10.1557/PROC-0895-G03-04 ↗
14. Empirical investigation of the energy payback time for photovoltaic modules10.1016/S0038-092X(01)00033-0 ↗
15. Life cycle assessment of crystalline photovoltaics in the Swiss ecoinvent database10.1002/pip.614 ↗
16. Energy viability of photovoltaic systems10.1016/S0301-4215(00)00087-2 ↗
17. Life cycle assessment and energy pay-back time of advanced photovoltaic modules: CdTe and CIS compared to poly-Si10.1016/j.energy.2006.10.003 ↗
18. A life-cycle analysis on thin-film CdS/CdTe PV modules10.1016/S0927-0248(00)00293-2 ↗
19. Life cycle analysis of organic photovoltaic technologies10.1002/pip.967 ↗
20. Environmental aspects of electricity generation from a nanocrystalline dye sensitized solar cell system10.1016/S0960-1481(00)00111-7 ↗
21. Ex-ante environmental and economic evaluation of polymer photovoltaics10.1002/pip.891 ↗
22. Life cycle analysis for future photovoltaic systems using hybrid solar cells10.1016/j.rser.2009.10.016 ↗
23. Konarka Technologies, Inc. 〈www.konarka.com〉 (accessed on the 10 June 2010).
24. PixDro, Ltd. 〈www.pixdro.com/〉 (accessed on the 10 June 2010).
25. Extrusion Dies Industries, L.L.C. 〈www.extrusiondies.com/〉 (accessed on the 10 June 2010).
26. Gutoff · 2010
27. Gutoff · 2006
28. Manufacture, integration and demonstration of polymer solar cells in a lamp for the Lighting Africa initiative10.1039/b918441d ↗
29. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
30. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
31. A simple nanostructured polymer/ZnO hybrid solar cell preparation and operation in air10.1088/0957-4484/19/42/424013 ↗
32. A roll-to-roll process to flexible polymer solar cells: model, studies, manufacture and operational stability studies10.1039/b823001c ↗
33. International Organization for, Standarization, ISO 14040 series. Environmental management—life cycle assessment, 2006.
34. G. Hammond, C. Jones. Inventory of Carbon & Energy (ICE) Version 1.6a, in, Department of Mechanical Engineering, University of Bath, UK; 2008.
35. PlasticsEurope database, LCA process inventories for refining and plastic production, 2006, 〈http://lca.plasticseurope.org/index.htm〉 (accessed on the 10 June 2010).
36. European Photovoltaic Technology Platform, A Vision for photovoltaic technology european photovoltaic technology platform, in, European Commission, 2005.
37. Danish Energy Agency Energy Statistics, 2008, 〈http://www.ens.dk/〉 (accessed on the 10 June 2010).
38. Second strategic energy review an eu energy security and solidarity action plan, European Commission, 2008.
39. Greenhouse gas emission trends and projections in Europe 2009. Report no. 9/2009, European Environment Agency, 2009.
40. Life cycle assessment study of a 4.2kWp stand-alone photovoltaic system10.1016/j.solener.2009.03.012 ↗
41. Modern equipment sets for production of demineralized and deionized water10.1023/B:CAPE.0000047650.99051.f2 ↗
42. Atkins · 2008