journal article·2017-10

Thermal properties and thermal conductivity enhancement of composite phase change materials using myristyl alcohol/metal foam for solar thermal storage

Xiang Huang, Yaxue Lin, Guruprasad Alva, Guiyin Fang

Publisher page

Abstract

Abstract Myristyl alcohol (MA)/metal foam composite phase change materials (CPCMs) were fabricated by vacuum melting infiltration. MA was used as the phase change material (PCM) and the metal foam was used as skeleton. Nickel foam and copper foam were both employed for comparison. Furthermore, effects of pore size of metal foam on thermal performances were analyzed. Thermal properties, including differential scanning calorimeter (DSC) test results and thermogravimetry analyzer results (TGA) were investigated and recorded. Compared with latent heat of pure MA, the latent heat of CPCMs for the melting process decreased by 3–29%. TGA results showed that the composites have good thermal stability. Fourier transformation infrared spectroscope (FT–IR) and X–ray diffractometer (XRD) were used to determine chemical and crystalloid structure of the composites, respectively. Microstructures of the composites were analyzed by scanning electron microscope (SEM), and the results indicated that the PCM was well absorbed by the metal foam. Thermal conductivity of the composites was measured by thermal conductivity meter (TCM), and the outcome proved that MA/metal foam composites have an improved thermal conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Advanced Battery Technologies Research · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Preparation and thermal characterization of paraffin/metal foam composite phase change material10.1016/j.apenergy.2013.04.050 ↗
2. Experimental investigation of tubes in a phase change thermal energy storage system10.1016/j.apenergy.2011.05.026 ↗
3. Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems10.1016/j.apenergy.2009.01.014 ↗
4. Thermal characterization of gypsum boards with PCM included: thermal energy storage in buildings through latent heat10.1016/j.enbuild.2012.01.026 ↗
5. Experimental and numerical investigation of a phase change material: thermal-energy storage and release10.1016/j.apenergy.2011.01.036 ↗
6. A review of power battery thermal energy management10.1016/j.rser.2011.07.096 ↗
7. Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete10.1016/j.enbuild.2013.02.053 ↗
8. Investigation of exfoliated graphite nanoplatelets (xGnP) in improving thermal conductivity of paraffin wax-based phase change material10.1016/j.solmat.2011.01.048 ↗
9. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications10.1016/j.renene.2006.11.011 ↗
10. Enhancing thermal conductivity of palmitic acid based phase change materials with carbon nanotubes as fillers10.1016/j.solener.2009.12.004 ↗
11. Miscibility studies of paraffin/polyethylene blends as form–stable phase change materials10.1016/j.eurpolymj.2013.09.027 ↗
12. Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage10.1016/j.carbon.2015.03.009 ↗
13. PCMs heat transfer performance enhancement with expanded graphite and its thermal stability10.1016/j.proeng.2015.01.326 ↗
14. Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites10.1016/j.apenergy.2015.03.020 ↗
15. Thermal conductivity enhancement of sodium acetate trihydrate by adding graphite powder and the effect on stability of supercooling10.1016/j.egypro.2015.02.121 ↗
16. Thermal conductivity enhancement of energy storage media using carbon fibers10.1016/S0196-8904(99)00166-1 ↗
17. High thermal conductivity phase change composite with percolating carbon fiber network10.1016/j.apenergy.2015.05.042 ↗
18. Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes10.1016/j.ijheatmasstransfer.2015.05.005 ↗
19. Carbon nanotube grafted with polyalcohol and its influence on the thermal conductivity of phase change material10.1016/j.enconman.2014.04.002 ↗
20. Novel stearic acid/graphene core–shell composite microcapsule as a phase change material exhibiting high shape stability and performance10.1016/j.solmat.2015.02.009 ↗
21. Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives10.1016/j.ijthermalsci.2014.07.011 ↗
22. Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles10.1016/j.applthermaleng.2012.05.033 ↗
23. An experimental investigation of enhanced thermal conductivity and expedited unidirectional freezing of cyclohexane–based nanoparticle suspensions utilized as nano–enhanced phase change materials (NePCM)10.1016/j.ijthermalsci.2011.11.005 ↗
24. Enhanced thermal conductivity and thermal performance of form–stable composite phase change materials by using b–aluminum nitride10.1016/j.apenergy.2008.10.020 ↗
25. Enhancement of thermal conductivity of ethylene glycol based silver nanofluids10.1016/j.powtec.2010.11.016 ↗
26. Heat transfer enhancement of phase change composite material: copper foam/paraffin10.1016/j.renene.2016.04.039 ↗
27. Phase change heat transfer enhancement using copper porous foam10.1115/1.2928010 ↗
28. Study on the melting process of phase change materials in metal foams using lattice Boltzmann method10.1007/s11431-010-4074-5 ↗
29. Heat transfer performance analysis of a solar flat–plate collector with an integrated metal foam porous structure filled with paraffin10.1016/j.applthermaleng.2010.04.031 ↗
30. Open–cell aluminum foams filled with phase change materials as compact heat sinks10.1016/j.scriptamat.2006.07.050 ↗
31. Preparation and properties of PVA–g–C16OH copolymer based grafting copolymerization
32. Synthesis and thermal properties of the MA/HDPE composites with nano–additives as form–stable PCM with improved thermal conductivity10.1016/j.apenergy.2016.07.106 ↗
33. Crystallisation, melting, recrystallisation and polymorphism of n–eicosane for application as a phase change material10.1016/j.tca.2006.02.008 ↗
34. Preparation and properties of PVA–g–C16OH copolymer based grafting copolymerization
35. Preparation, thermal properties and thermal reliability of form–stable paraffin/polypropylene composite for thermal energy storage10.1007/s10924-009-0146-7 ↗
36. DSC studies on the transformation kinetics of two separated crystallization peaks of Si12.5Te87.5 chalcogenide glass: an application of the theoretical method developed and isoconversional method10.1016/j.matchemphys.2011.10.009 ↗
37. Synthesis and characterization of storage energy materials prepared from nano–crystalline cellulose/polyethylene glycol
38. Preparation and thermal characterization of expanded graphite/paraffin composite phase change material10.1016/j.carbon.2010.03.030 ↗
39. Preparation, thermal properties and thermal reliability of eutectic mixtures of fatty acids/expanded vermiculite as novel form–stable composites for energy storage10.1016/j.jiec.2010.07.003 ↗
40. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form–stable PCM for thermal energy storage10.1016/j.solmat.2008.11.057 ↗