journal article·2014-08

Preparation and thermal properties of quaternary mixed nitrate with low melting point

Nan Ren, Yu-ting Wu, Chong-fang Ma, Li-xia Sang

Publisher page

Abstract

Abstract Mixed molten salt is considered as a promising medium for both heat transfer and energy storage in solar thermal power because of its many advantages such as large heat capacity, low vapor pressure, low cost, wide range of temperature in application, etc. In order to obtain molten salt with lower melting point and higher decomposition temperature, a new kind of nitrate was prepared based on different mixing ratios of KNO3–NaNO3–LiNO3–Ca(NO3)2·4H2O. Experimental results show that the melting point of some molten salts can be down to below 90 °C with their decomposition temperature above 600 °C. The new kind of mixed molten salts has a lower melting point and wider usable temperature range. In addition, other thermal properties such as latent heat of melting, specific heat, density, viscosity, thermal conductivity and thermal stability are measured and analyzed, which are also not worse than that of commonly used mixed molten salt. Therefore, it is a promising medium for both heat transfer and energy storage in solar thermal power plants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. State of the art on high temperature thermal energy storage for power generation. Part 1 – concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
2. Assessment of a molten salt heat transfer fluid in a parabolic trough solar field10.1115/1.1565087 ↗
3. R.W. Bradshaw, N.P. Siegel, Molten nitrate salt development for thermal energy storage in parabolic trough solar power systems, in: Proceedings of the ASME Conference on Energy Sustainability(ES2008-54174), 2008, pp. 1–7.10.1115/ES2008-54174 ↗
4. Multicomponent molten salt mixtures based on nitrate/nitrite anions10.1115/1.4003418 ↗
5. J.G. Cordaro, A.M. Kruizenga, R. Altmaier, et al., Thermodynamic properties of molten nitrate salts, in: Proceedings of the SolarPACES Conference, Granada, Spain, 2011.
6. B.D. Iverson, J.G. Cordaro, A.M. Kruizenga, Thermal property testing of nitrate thermal storage salts in the solid-phase, in: Proceedings of the ASME Conference on Energy Sustainability (ES2011-54159), 2011, pp. 1–8.10.1115/ES2011-54159 ↗
7. S.T. Broome, B.D. Iverson, N.P. Siegel, et al., Temperature-Dependent Mechanical Property Testing of Nitrate Thermal Storage Salts, SAND2010-6013, 2010, pp. 1–35.
8. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗
9. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
10. A new heat transfer medium for high temperatures
11. Geiringer · 1962 · 208
12. Viscosity of potassium nitrate–sodium nitrite–sodium nitrate mixtures10.1021/je00028a014 ↗
13. Singh · 1985 · 223
14. Temperature dependent study of viscosity of KNO3–NaNO2–NaNO3 ternary molten salts10.1080/00319100600757243 ↗
15. Xie · 1998 · 26
16. A.B. Zavoico, Solar Power Tower Design Basis Document, SAND2001-2100, Sandia National Laboratories, 2001, pp. 13–19.10.2172/786629 ↗
17. Silverman · 1977 · 145
18. Coastal Chemical Co, Hitec Heat Transfer Salt, LLC Brenntag Company, pp. 1–10.